Product

Micrometers - Depth

-

Fowler High Precision, Inc.

Fowler High Precision, Inc.

Is used to find the distance between two parallel surfaces i.e. depth of holes, slots, shoulders and projections.

Product

Durometer & Tread Depth Gauge

52-50556

-

Longacre Racing Products, Inc.

52-50556 - Longacre Racing Products, Inc.

Racing Tire Hardness Tester. Tire hardness changes as tires get older and even varies between new tires. Now you can keep track of exactly where your tires are. Be precise, don't guess.

Product

Case Depth Hardness Tester

HTD-4000

-

Qualitest International Inc.

HTD-4000 - Qualitest International Inc.

HTD 4000 is used to measure case depth and is capable of verifying case depths ranging from 0.4mm (16 thou) up to a maximum of 2.5 / 2.8mm (100110 thou). Our system utilizes a new and very advanced principle based on the continuous measurement of the electrical resistance in relation to the working load applied. Our design meets the demands of the heat treatment industry. HTD 4000 is equipped with a big stand to enable the testing of large work pieces having overall dimensions up to 550mm (22") in height and 350mm (13.8") depth

Product

Short-Depth Servers

-

Advantech Co. Ltd.

Advantech Co. Ltd.

Advantech short depth servers are designed to optimize performance and throughput of 5G, vRAN, MEC and IoT applications at the edge of the network.

Product

Cable Tester, HDMI Cable, Handheld, Height 102mm, Width 95mm, Depth 27mm

72-13550

-

Tenma

72-13550 - Tenma

*HDMI cable tester with LED status display*Tests for normal/short/open/crossover circuit*Scan/full display testing modes conversion*Single key operation*Manual/auto power off (after 10 minute inactivity)*Low battery indication < 7.2V*HDMI/HDMI-mini interface*9V battery (6F22)*12-month limited warranty *view Terms & Conditions for details

Product

Conductivity/ Temp/ Depth (CTD)

-

Onset

Onset

Durable, waterproof data loggers designed for monitoring water quality, salinity, and water levels in fresh or saltwater environments.

Product

TIRE TREAD DEPTH GAUGE ACCESSORY

MDMAXTPMSTTD

-

Matco Tools

MDMAXTPMSTTD - Matco Tools

*Add-on accessory that allows technician to measure tire tread depth with high accuracy when checking TPMS sensors*In one simple gesture, it can detect worn tires, tire damage and indicate poor alignment with tread depth trigger activation button*Provides a quick vehicle safety check, quickly captures 3 tire measurements (inner, center, outer)

Product

Durometers

-

PCE Instruments

PCE Instruments

A durometer gauge or durometer tester is needed to perform a durometer hardness test procedure. Durometer devices determine the surface hardness of many different materials, including polymers and elastomers. Each durometer or hardness tester measures the depth of an indentation in the material caused by a defined force of a given geometric presser foot. The depth of the indentation reflects the hardness of the material. A general distinction is made between static and dynamic methods. In traditional static tests, the test force is applied uniformly with increasing magnitude, while in dynamic testing methods, an instantaneous load is applied.

Product

19" Rackmount Drawer, Unshielded, 7"H x 30"D

DR-071930

-

ELMA Electronic, Inc.

DR-071930 - ELMA Electronic, Inc.

Unshielded drawers are constructed of 20 ga. CRS and are furnished with ball bearing chassis slides to provide smooth operation. Available for 19" and 24" rackmount in 20", 24" and 30" depths, with or without a keylock

Product

Rapid Collection of Conductivity, Temperature (Thermistor) and Depth

rapidPro CTD

-

Teledyne Valeport Ltd,

rapidPro CTD - Teledyne Valeport Ltd,

Optionally, the rapidPro CTD is designed to operate with the Teledyne OceanScience rapidCAST underway profiling winch to deliver the highest quality CTD and optional optical parameter casts on the move. While the vessel is underway profiles of up to 450m at 6 knots are expected.

Product

Wall-Mount Enclosure

Model BOX

-

Laurel Electronics, Inc

Model BOX - Laurel Electronics, Inc

Model BOX is a wall-mount / bulkhead enclosure which provides environmental protection to IP65 / NEMA-4X. It comes with a 1/8 DIN panel cutout (45 x 92 mm) and can be used with 1/8 DIN instruments with a depth up to 134.5 mm (5.30"). This includes all 1/8 DIN instruments sold by Laurel Electronics.

Product

9050 Slide Mount

-

Virginia Panel Corporation

Virginia Panel Corporation

The 9050 Slide Configuration provides maximum test system versatility. This configuration allows for easy instrument wiring and chassis access which allows for shorter cable lengths and a flush rack mount to save valuable work space.Ordering has been simplified with packages offered that include the 9050 receiver, receiver mounting plate, flanges and instrument bracket. Slide kits are available in depths designed to fit most common racks. To determine the slide kit needed, measure rack depth between mounting rails. Slides are rated to support 180 lbs (81 kg) to accommodate even the largest fixtures.

Product

Samples Preparation (Polisher/Grinder)

-

MRC ltd.

MRC ltd.

* LCD displays all the cutting data.* The diameters of specimens to be cut range from 5 to 8mm (1008:100mm) and the cutting capacity reaches 100x200mm.* Manual cutting and automatic cutting can be changed over at random. * Large cutting chamber & tempered-glass view window.* Non-burnt movable cutting mode which greatly improves cutting quality.● Automatic retract at the end of cutting operation.● Dual-direction feed which increase the depth of cutting.

Product

24" Rackmount Drawer, Unshielded, 7"H x 30"D

DR-072430

-

ELMA Electronic, Inc.

DR-072430 - ELMA Electronic, Inc.

Unshielded drawers are constructed of 20 ga. CRS and are furnished with ball bearing chassis slides to provide smooth operation. Available for 19" and 24" rackmount in 20", 24" and 30" depths, with or without a keylock

Product

Concrete Inspection

-

Elcometer Limited

Elcometer Limited

Concrete structures are normally constructed using steel reinforcement and Elcometer offers Concrete Covermeters and Rebar Locators to either measure the depth of concrete over the rebar or simply to detect the rebar under the surface. Half-cell versions of the Covermeter can be used to assess the probability that corrosion is taking place on the rebar. Test Hammers are used to assess the surface hardness of cured concrete and Elcometer offers several moisture meters that can be used to determine if the structure is sufficiently dry for coating.

Product

Swept-Source OCT System

-

Santec Corporation

Santec Corporation

Santec’s Swept-Source Optical Coherence Tomography System (SS-OCT) provides a complete, flexible solution which can be used for a wide range of applications, both medical and industrial. Components can be selected to optimize the imaging speed, resolution, imaging area and depth for each application. The system is supplied with a graphic user interface (GUI) that controls the scan parameters and displays both cross sectional and 3D images. An API is available as an option, for integration with other equipment and image analysis automation. We also supports the hardware and software customization where appropriate.

Product

Surface Analysis

InSight-450 3DAFM

-

Bruker Optics

InSight-450 3DAFM - Bruker Optics

Based on the production-proven InSight® 3DAFM platform for 300mm, the InSight-450 3DAFM is ideally suited for a broad range of roughness, depth and CD applications.

Product

Strength Meter

NOVOTEST IPSM-U+T+D (Pulse Velocity Tester)

-

NovoTest

NOVOTEST IPSM-U+T+D (Pulse Velocity Tester) - NovoTest

The pulse velocity tester IPSM-U+T+D allows to measure the strength and homogeneity of the concrete, bricks and other materials under the composition and surface sounding in products and designs for construction projects, inspection of buildings and structures, according to ASTM C597-16 (Standard Test Method for Pulse Velocity Through Concrete).  Has the determining of the depth of cracks by the surface sounding probe function and also flaw detection mode (A-scan).