Multichannel Analyzers
-
product
Signal Analyzer
Choose from an extensive selection of signal analyzer products from DC to 44.5 GHz and extendable to 325 GHz.With excellent total level accuracy, dynamic range and performance, Anritsu spectrum/signal analyzers not only can capture wideband signals but FFT technology supports multifunction signal analyses in both the time and frequency domains. Moreover, the built-in signal generators on some models outputs both continuous wave (CW) and modulated signals for use as a reference signal source.
-
product
Logic Analyzer & Digital Pattern Generator
ScanaQuad Series
ScanaQuad (SQ) is a series of high performance 4 channels logic analyzers and digital pattern generators. They are designed to be your best companion when working on serial protocols like UART, SPI, I2C, 1-Wire, USB, I2S, CAN, LIN, RS232, RS485, and more. With ScanaQuad Logic Analyzers, you can capture signals, you can play them back, and you can even build genuine test signals and generate them!
-
product
System for Analyzing Door Handles
In the production process of a vehicle door handle, the electrical functions of the component are to be tested. The mechanical testing of the operation of the door handle is performed by a PLC-controlled test system. In addition to the mechanical test, the electrical parameters: “serial data stream” and “impedance of the antenna” are to be analysed.
-
product
Oxygen/Nitrogen/Hydrogen Analyzer
EMGA-930
This is a simultaneous oxygen, nitrogen & hydrogen elemental analyzer with high accuracy and repeatability suiting to cutting-edge technology's R&D as well as quality control in the market of steel, new materials, catalyst and so on. This is a new generation model optimized to fit to user's requests.The oxygen is measured as carbon monoxide and carbon dioxide by two non-dispersive infrared detectors, the nitrogen by a thermal conductivity detector and the hydrogen with non dispersive Infra Red detector as H2O.
-
product
Protocol Analyzer
RapidIO
Sanifferr' s RapidIO architecture incorporates its protocol analyzer and traffic generator into the same hardware, making it an elegant and complete solution for debugging devices within a Serial RapidIO environment.
-
product
Powerline Analyzer
SHARK 100
Amperis introduces one of the highest performance panel-type billing grade meters in the industry. Based on a new platform, this low cost meter significantly outperforms other much more expensive equipment. This unit is perfect for new measurement applications and for direct and simple replacement of existing analog meters. The Shark is excellent for high accuracy energy measurement exceeding ANSI C12.20 (0.2%) and IEC 687 (0.2%) energy measurement standards.
-
product
Trace-Level UV Fluorescence SO2 Analyzer
Model T100U
Teledyne Advanced Pollution Instrumentation
The Model T100U Trace-level SO2 analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. It uses the proven UV fluorescence principle, and is designed to allow ultra-sensitive SO2 measurements while still meeting the requirements for use as a US EPA compliance analyzer.The analyzer uses both the light and dark phases of the pulsed UV light source to continuously detect and correct for electronic noise, giving exceptionally stable and sensitive performance. A separate UV detector allows the instrument to continuously correct for variations in lamp intensity. Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift, and a reference detector to correct for changes in UV lamp intensity. A hydrocarbon "kicker" and advanced optical design combine to prevent inaccuracies due to interferents.
-
product
UV Fluorescence Hydrogen Sulfide Analyzer
Model T101
The Model T101 H2S analyzer uses the proven UV fluorescence principle to measure hydrogen sulfide at levels commonly required for ambient air monitoring.The Model T101 is equipped with an internally mounted catalytic converter set at 315°C to convert H2S to SO2. A switching mode alternately measures H2S and SO2 while showing both readings concurrently on the front display.All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports, either locally or by remote connection.The Model T101 comes with NumaView™ Software. NumaView™ Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView™ Software.
-
product
4GHz 2-port Vector Network Analyzer
VNA-0440
The VNA-0440 is a full bi-directional 2-port Vector Network Analyzer that is controlled from a PC through a USB connection. It is the cheapest VNA in our VNA-04 series but provides all functionality for antenna development for the low ISM and Wifi bands.
-
product
pH Analyzers & ORP Analyzers
A pH analyzer consist of a sensor, transmitter and process adaption, combined to best suit your pH control needs. In-line pH analyzers from METTLER TOLEDO provide accurate process pH measurements in a wide range of environments, from ultrapure water to hygienic measurement in a bioreactor to dirty chemical production. pH analyzers and ORP analyzers that use digital Intelligent Sensor Management (ISM) technology help reduce maintenance through integrated predictive diagnostics.
-
product
Process Analyzers
Metrohm Process Analytics
Metrohm Process Analytics combines Applikon’s expertise in online analysis and the know-how of the world’s leader in ion analysis, Metrohm. This combination has yielded analytical instruments that meet any requirements in the process industry. The product range varies from single-parameter analyzers to the most advanced multiparameter Ex Proof Analyzer for the most hazardous environments. With the NIRSystems Process Analyzers, Metrohm Process Analytics is setting the standard for real-time spectroscopic analysis with unmatched stability and performance.
-
product
Stationary Metal Analyzer
SPECTROCHECK
SPECTRO Analytical Instruments GmbH
The SPECTROCHECK stationary metal analyzer is specifically designed to meet the performance requirements — and the budgets — of small and medium-size foundries and machining operations. This high-quality, compact, affordable instrument is ideal for routine analysis of elemental content in iron-, aluminum-, and copper-based metals.
-
product
FieldFox Handheld Analyzer Software
FieldFox can be configured as a cable and antenna analyzer, vector network analyzer, spectrum analyzer, built-in power meter and much more using software/firmware functionality. All functions listed on this page can be installed at the time of FieldFox purchase or can be upgrade via a software license key. Select the functionality you need today and add more features as your needs change.
-
product
Ethanol In Gasoline Analyzer
InfraCal 2 ATR-E
The InfraCal 2 Ethanol Blend Analyzer for measuring percent ethanol in gasoline is the ideal solution where a quick, accurate, on-site measurement is required and a single, repetitive ethanol blend analysis is needed. The InfraCal 2 ATR-E is based on proven IR technology, and used by fuel terminals, laboratories and regulatory agencies worldwide. The compact, easy-to-use InfraCal 2 ATR-E has a measurement range of 0-20 & 70-98%% ethanol in gasoline and an accuracy of +/- 0.2%. These results are comparable to ASTM D4815.
-
product
Precision Impedance Analyzer
TH2851-130
Changzhou Tonghui Electronic Co., Ltd.
■ Test frequency: 10Hz-130MHz ■ High precision: using automatic balance bridge technology, four-terminal pair test configuration ■ High stability and consistency ■ High speed: the fastest test speed up to 5ms
-
product
Audio Analyzer
MS20
The MiniSonic MS20 is a combined oscillator and measuring set in a stand-alone unit, which is both compact and portable. As well as being a quality tester the MS20 is a precision line-up tool, a stereo PPM, a balanced-unbalanced convertor (both ways), a stereo microphone pre-amp, a headphone amp, and a level convertor.
-
product
Multispectra, Multifiber, Multichannel Imaging spectrometer with 8-16-32 Simultaneous UV-NIR Spectra
PoliSpectra® M116 MultiTrack Spectrometer
HORIBA designs and manufactures a large range of custom OEM fiber-coupled, multi-spectra spectrometers capable of simultaneous measurement of up to 32 fiber channels and sequential measurement up to 96. Utilizing a concentric imaging spectrometer with a broadband spectral range and a customized fiber bundle, the HORIBA OEM multifiber spectrometers provide excellent imaging quality with minimum crosstalk.
-
product
Network Analyzers
MPR4 Series
Entes MPR series Network Analysers are designed to measure all electrical parameters of the networks in industrial plants.
-
product
Spectrum Analyzer
SA-S
RF Frequency Range: 1 Hz to 4.2 GHz. Low noise amplifier available above 500 KHz. Wide dynamic range: -151 dBm to +10 dBm. Resolution bandwidths (RBW) of 0.1 Hz to 250 KHz and 5 MHz. Includes a High Dynamic Range Measuring Receiver. 0.25 dB relative accuracy. 0 dBm to -125 dBm, 150 KHz to 1 GHz. 0 dBm to -115 dBm, 1 GHz to 4.4 GHz. Adjustable digital audio filters. Accurate AM and FM measurements
-
-
product
HEVC Analyzer for Rapid Prototyping
HARP
HARP is an open source toolkit for rapid prototyping of new HEVC / H.265 video codec extensions. Our motivation for creating HARP lies in the simple idea that a well-chosen development environment allows to focus time and resources more on the design stage of new HEVC extensions and less on subsequent implementation and debugging tasks.
-
product
Multi-Channel Synchronization Module for M8190A, M8020A or M8030A
M8192A
Complex testing sometimes requires playing multiple waveforms in parallel (e.g. multi-emitter testing). The M8192A synchronization module allows engineers to synchronize up to 12 M8190A channels and fits into a standard AXIe frame.The M8192A synchronization module also supports testing of high-speed digital busses like PCI Express.Test efficiency can be increased by testing up to 10 lanes with the M8051A and the M8041A BERT modules in parallel. These can be synchronized by the M8192A module.
-
product
Bus Analyzer
FireSpy® 9433bTRGD/9833bTRGD
The FireSpy9433bTRGD and FireSpy9833bTRGD bus analyzer are world’s only 9-bus IEEE-1394 protocol analyzer meeting harsh flight line and in-field testing. Based on the 4th generation FireSpy analyzer architecture the FireSpy9432bT/9832bT but has been incorproated into an enclosure designed to meet MIL-STD-810 requirements.
-
product
Wireless Vibration Analyzer- ARGUS
ARGUS
Signals & Systems India Private Limited
Argus Tri-axial wireless vibration sensor enables easy condition monitoring of rotary machines and detects faults well soon before the equipment failure. The super-compact, IP67 rated vibration sensor provides reliable data for continuous monitoring and remote diagnostics. This Tri-axial sensor communicates with Android devices in both wired and wireless modes. The dedicated Argus app enables Multichannel Data Acquisition for simultaneous monitoring of various nodes.INCREASE MACHINE LIFESPAN - EARLY DIAGNOSIS ELIMINATES PROBLEM SEVERITY WHICH IN TURN ENHANCES MACHINE LIFESPANREDUCE YOUR RISK - REMOTE MONITORING ENSURES EMPLOYER SAFETY IN A HAZARDOUS ENVIRONMENT.50% REDUCTION IN MAINTENANCE COST - PREDICT & RECTIFY THE FAULTS EARLY TO LOWER THE UNDESIRED MAINTENANCE COST.40% REDUCTION IN UNPLANNED DOWNTIME - REDUCE MACHINE DOWNTIME AND INCREASE THE PRODUCTIVITY.
-
product
Beagle USB 12 Protocol Analyzer
TP320221
The Beagle USB 12 Protocol Analyzer is a non-intrusive Full/Low Speed USB protocol analyzer that includes real-time USB descriptor parsing. Developers can monitor what is happening on the USB bus as it happens with 21 ns resolution.
-
product
PC Based Automatic Motor Analyzer
D-9005 FMT
The PC Based Automatic Motor Analyzer is the most comprehensive tester designed to automatically check the quality of Motors in fast paced production motor shops.
-
product
Clinical Chemistry Analyzer
Pentra C Range
2004 marked a major step in positioning the Medical segment in this market with the launch of the Pentra 400, the first automated Clinical Chemistry analyzer designed by HORIBA Medical.The offer will be completed with the addition of new analyzers adapted to the needs of hospitals and private laboratories.
-
product
Multi Channel Analyzer
BOSON
Baltic Scientific Instruments, Ltd
Spectrometric device BOSON acquires and displays spectra with overlapping by energy up to 1000 timesNo resolution deterioration at operation in the beginning of spectrum energy rangeStable operation with preamplifiers of TPR type with output voltage swing up to +/- 10 V and reset duration up to 250 usAutomated P/Z adjustmentImproved dead time correctionSoftware-based spectrum stabilizationSetting and control of all parameters using colour LCD display with touch screenComplete remote control of Boson via software on PCAuto BLRAnalogue time dependent shapingSpectrum stabilizationDead time correctionOperation with preamplifier TPR
-
product
Data Line Analyzer
ELA 10
20 Hz to 20 kHz selective/wideband Level Meter & Generator, with Spectrum Analyser, and phone symulator dialer.
-
product
Lead-acid Storage Battery Analyzer
From the beginning of 2006 the verification of measurements of the analyzer of lead-acid chemical sources developed by Company "Megaron" is spent in Test laboratory "Neva-Reglament". The analyzer is intended for the express-estimation of a condition of lead-acid batteries: before the first use of new battery (an estimation of the electric characteristics declared by the manufacturer); during the battery operation (an estimation of a condition and working capacity at real application).
