Product

Linear Testfixture (Cassette Not Included), UTT 586 x 413 mm

MG-04

-

MG Products

MG-04 - MG Products

FEATURES• Linear click system with ball bearings, using gas springs• 10 mm ESD-proof top cover with aluminium reinforcement bars• Steel base cabinet with detachable aluminium back and bottom panels• Detachable interchangeable case system with an 8 mm spring loaded probe protection cover• Base cabinet fitted with a telescopic guide rail and catchTECHNICAL SPECIFICATIONS• Max. number of probes (2000N) 1300 units• Max. PCB height: 60 mm• Linear travel: 12 mm• Max UUT: 586 x 413 mm (wxd)• Outer dimensions: 800 x 635 x 100 x 190 mm (wxdxh1xh2)• Designed for changeable cassette

Product

Mixed Signal Oscilloscopes

-

Cleverscope Ltd.

Cleverscope Ltd.

Fully configured USB 2.0 oscilloscope - 14 bit 100 MSa/s, 2 analog channels, 8 digital inputs, External Trigger, 8M samples storage for each of the 2 analog and 8 digital channels, CS700 Signal Generator (0-10MHz, Sine, Square, Triangle). Complete with the CS300 application software, 2 x CS1001 and CS1004/5 probe sets. The front panel ground is continuous via the USB ground to the PC.

Product

Ambient

-

KP Technology

KP Technology

KP Technology offer a range of Kelvin Probes that work in an ambient environment.

Product

Probe Systems

Mini-PS4L

-

SemiProbe

Mini-PS4L - SemiProbe

The mini-PS4L series of probe systems are built using a similar concept as our patented Probe System for Life (PS4L) Architecture. The base system is built on a 300 mm x 300 mm metric breadboard and that allows the user to configure the system to meet the application and budget.

Product

Compressed Air RH+T+Tdp Sensor

T0211P-2

-

COMET SYSTEM, s.r.o.

T0211P-2 - COMET SYSTEM, s.r.o.

Humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

Product

Exchangeable Test Fixture

MA 2109/D/H/S-5

-

INGUN Prüfmittelbau GmbH

MA 2109/D/H/S-5 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: Test system sideInterface signals max.: 850Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 8,50 kg

Product

Waterproof pH Tester

pH51

-

Milwaukee Instruments

pH51 - Milwaukee Instruments

The Milwaukee Waterproof pH51 Tester is one of our most accurate low cost, rugged and reliable pH testers in the market featuring the ability to easily replace the probe providing for years of carefree use. It's simple 2 point manual calibration is simple-to-use. Ideal for use in aquariums, hydroponics, horticulture, pools and many other applications.

Product

Electrical Tester Grid Field

-

Test Connections Inc.

Test Connections Inc.

TCI can furnish grid spring probes for most Bare Board Electrical Testers in production at most Printed Circuit Board Manufactures. Look for your model of Bare Board Tester in the following list and call TCI for current price quotation.

Product

Reference Magnets

Series MT

-

Wuntronic GmbH

Series MT - Wuntronic GmbH

The reasonably priced WUNTRONIC standard reference magnets offer the possibility in a simple way of being able to calibrate or to check magnet measuring instruments like Gauss Meter/Tesla Meter with the respectively accompanying probes in a defined magnetic field.

Product

Barometric Probe

PP472

-

Senseca

PP472 - Senseca

Barometric probe complete with SICRAM module.

Product

Automotive Test Lead Kit

143

-

Electronic Specialties Inc.

143 - Electronic Specialties Inc.

Test Lead Kit includes our basic set of interchangeable specialty test probes designed for automotive use. The flexible back probing pins are great for sliding into automotive connectors like those on fuel injectors and MAP sensors. The large Crocodile Clips are good for clipping to grounds and battery terminals. Roll up storage pouch keeps your leads organized.

Product

WLCSP Probe Heads

-

Smiths Interconnect

Smiths Interconnect

Smiths Interconnect offers Wafer Level Chip Scale Package (WLCSP) Probe Heads utilizing spring probe technology which provide high parallelism in test, superior signal integrity and high speed / RF testing capability.

Product

Flexible Implantable Microprobe

IT-14

-

Physitemp Instruments

IT-14 - Physitemp Instruments

IT-14 Flexible Implantable Microprobe - Implantable in semi-solids and tissue with 14 gauge needle (supplied). Also for immersion in various solutions. Totally sheathed in chemical resistant Teflon™. Quited rugged. Maximum Temperature 150°C . Isolated. Probe diameter .050" (14 gauge represents the needle gauge that the probe can be inserted through). Time constant 0.3 seconds.

Product

CAM/TRAC Test Kits

Series 43

-

Semco Machine Corp.

Series 43 - Semco Machine Corp.

The GR Series 43 CAM/TRAC®1 kits, utilizing the patented CAM mechanism, offer precise Z axis linear motion when testing higher point count and finer pitch test centers. By using the Z axis motion, side load of the test probes is minimized thus increasing probe life and performance.  The Series 43 provides interface compatibility by using a 12 position, GR2270 style I/O block interface. This interface accepts the industry standard I/O, power, and coax blocks.

Product

Sensors

Chromatic Focus Probe

-

Werth Inc.

Chromatic Focus Probe - Werth Inc.

Measurement of highly reflective, absorbent and transparent materialsMeasuring results are independent of the surface propertiesEspecially suitable for fast and precise measurements on reflective surfaces, lenses, prisms and other optical devicesFlexible probe configurations for highly customized applications

Product

Immersion Probe

TP472I.O

-

Senseca

TP472I.O - Senseca

Immersion probe with SICRAM module, Pt100 sensor.

Product

Fully Automatic Non-contact Sheet Resistance Measurement System For Flatpanel Display

NC-60F/RS-1300N

-

NAPSON Corp.

NC-60F/RS-1300N - NAPSON Corp.

*Global standard for non-contact measurement of ITO film, Metal thin films on flat panel*Automatic X-Y and Z (eddy current probe head) axis moving mechanism*Compatible with Loading robot for fully automatic measurementOption :*Integlate to combined system (film thickness meter, etc)*Add 4 point probe measurement unit : RT-3000

Product

CAD / BOM Translation Software

ProntoTEST-FIXTURE

-

Unisoft Corp.

ProntoTEST-FIXTURE - Unisoft Corp.

In minutes the Unisoft ProntoTEST-FIXTURE software translates CAD and Bill of Materials (BOM) files into real reference designators, netlists, X/Y component pin geometries, values, tolerances, part numbers, etc. This data is then used by Test Engineers to program their ATE (Agilent/Hewlett Packard "board & board x/y", Teradyne "ipl", Genrad ".ckt"), MDA, and flying probe test equipment and design the "Bed of Nails" test fixtures.

Product

Engine Performance/Endurance Test System

-

Ono Sokki

Ono Sokki

Various types of test system as follows can be built up in combination with measurement control equipment and peripheral instruments (fuel flow meters, actuators, temperature control device, combustion analysis system, ECU monitor, OBD, sound and vibration measurement instruments, emission analyzer, smoke meter etc.)·Traveling fuel economy test·Gas emission test·Output performance test·Deterioration/endurance test·Combustion analysis·Sound source probing

Product

Residential/Commercial Combustion Analyzer

C165+

-

UEi Test & Measurement Instruments

C165+ - UEi Test & Measurement Instruments

Backed by UEi Service+ to give up to 6 years’ warranty, next day recertification, and a reduced cost of ownership. The C165+ Residential/Commercial Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and differential pressure. Prints to optional printer and wireless App. The new LINK feature connects the included wireless pipe clamp temperature probes and other optional probes to the C165+. Essential information for installing and maintaining furnaces and boilers all in one device.

Product

Manual Fixture Kit With Changeable Cassette, Max number of probes (2N) 1000 units, Max UUT 335 x 250 mm (wxd)

CMK-02

-

Columbia Elektronik AB

CMK-02 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs.10 mm ESD-proof top cover with aluminum reinforcement bars.Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.

Product

Probes

-

Metrix

Metrix

Metrix* proximity probes are interchangeable with Bently Nevada** Series 3300, 7200, and 3000. All probes incorporate the latest technology and include agency approvals.