Product

CMP Mechanical Kits

CMP-XXX-HP

-

Columbia Elektronik AB

CMP-XXX-HP - Columbia Elektronik AB

The CMP Mechanical kits are an excellent option for manual tests of both low and high volumes. Now in a more rigid design with removable probe plate for easier maintenance. Integrated fixture down switch as an option. The kit is available in 4 standard sizes but can be adjusted to your demands.

Product

WLCSP Probe Heads

-

Smiths Interconnect

Smiths Interconnect

Smiths Interconnect offers Wafer Level Chip Scale Package (WLCSP) Probe Heads utilizing spring probe technology which provide high parallelism in test, superior signal integrity and high speed / RF testing capability.

Product

High Temp Loggers

-

DeltaTRAK

DeltaTRAK

Bendable probe with rigid tip, measures up to 662°F (350°C)Monitor temperature inside bottles, vials, hard-to-reach placesHighly accurate over wide measurement rangeN.I.S.T. traceable calibrationRugged, submersible, for use in harsh environmentsNon-volatile solid state memory for maximum data securityUser replaceable batteryEasy to program and download

Product

Circuit Tester With Buzzer

28620

-

Lisle Corp.

28620 - Lisle Corp.

Tests low voltage up to 28 volts. Spring loaded hook can be removed to use the probe tip only. Can also be used to check polarity and battery drain.

Product

ProBus Probe Adapter for TekProbe-BNC Probes

TPA10

-

Teledyne LeCroy

TPA10 - Teledyne LeCroy

- Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope- Automatic probe detection- Provides all necessary power and offset control to the attached probe- Supports probes up to 4 GHz- Easy firmware updates- Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes

Product

Battery Capacity Analyzer

Model BCA6/12M

-

Aplab Limited

Model BCA6/12M - Aplab Limited

- Instant Measurement of energy stored in a storage battery- Tests 6V or 12V Lead Acid Batteries from 2Ah to 100Ah Capacity- Suitable for any SLA, GEL or Car Flooded Batteries- Displays DC Voltage and Balance available Ah capacity of the battery- Shows the Internal Resistance of the battery- Powered by the Battery under test- Micro-processor based digital control of entire testing process- Specially designed 4-terminal probing Battery Clamp of 100A capacity- Test simulates 20-Hr discharge test (C/20) with a few seconds- Bright, back-lit LED Display for test process display- On-screen User Guidance for testing on the built-in LCD Screen- Easy to use, portable and robust housing in a custom extrusion

Product

Skin Surface Probe

SST-1

-

Physitemp Instruments

SST-1 - Physitemp Instruments

The SST-1 skin surface temperature probe for humans, to be taped on is re-useable and has a fast response time.

Product

Acute High Voltage Differential Probe, 50x/500x, 100MHz, 3500V

ADP5100

-

TEAM SOLUTIONS, INC.

ADP5100 - TEAM SOLUTIONS, INC.

*USB Powered (or Power Bank)*Bandwidth up to 100 MHz*Overrange Indicator*Audible Overrange Alarm*Bandwidth Limit : 5 MHz / Full*Can be used by any DSO which has the USB port(s).*EC Declaration: EN 61010-031:2002 +A1:2008*Double-layer wire for power insulation

Product

Industrial Temperature Head Sensors

-

Labfacility Ltd.

Labfacility Ltd.

A selection of Head Mounted Industrial Temperature Sensors for many applications with RTD / PRT varieties, Hygienic and Heavy Duty probes.

Product

O/E Converter

TIA-950

-

Scitec Instruments Ltd

TIA-950 - Scitec Instruments Ltd

The TIA-950 optical receiver is the optimum instrument for the laboratory or for field use. This optical receiver can be used with a wide range of oscilloscopes and digitisers to provide the utility of a convenient, easy to use fibre optic probe. This compact unit mounts directly on the BNC input of an oscilloscope.

Product

Topside Probing In-Circuit Test Fixtures

-

Circuit Check, Inc.

Circuit Check, Inc.

Circuit Check matches top side test targets to your specification and needs. The Signature Series pneumatic drive fixture is the industry standard for precision, accuracy and repeatability.Today’s fifth generation Pneumatic drive supports as many as 8,000 test probes with centerline spacing to 25mil, and contacting test pads as small as 0.014″.

Product

DC-to-250MHz, X1/x10 Probe Kit (HP-3250i), Isolated BNC

PRB-HP-3250i

-

TEAM SOLUTIONS, INC.

PRB-HP-3250i - TEAM SOLUTIONS, INC.

Oscilloscope Probe 1:1-1:10 - HP-3250i250 MHz bandwidth, rated 600 V.The Oscilloscope Probe 1:1-1:10 - HP-3250i is a 1:1-1:10 selectable passive high impedance oscilloscope probe with 250 MHz bandwidth (1:10) designed and calibrated for use on oscilloscopes having an input impedance of 1 MOhm shunted by 20 pF. However, it may be compensated for use with an oscilloscope having an input capacitance of 10 to 30 pF.

Product

Water Filler for Nickel-Cadmium Cells

MasterFiller

-

JFM Engineering

MasterFiller - JFM Engineering

The MasterFiller is an instrument designed to deliver measured quantities of distilled water as required in the service of Aircraft Nickel-Cadmium batteries.· The MasterFiller consists of a microprocessor controlled pump with a level sensing probe, a keypad and display and an external 12VDC power supply (or optional battery).· The MasterFiller is part of a system comprising Intelligent Charger-Analyzers and Software for Battery Data Acquisition and Analysis, designed to improve the accuracy and efficiency of the process of testing batteries for airworthiness certification.

Product

Differential Probe

DP-15K

-

PINTEK Electronics

DP-15K - PINTEK Electronics

DP-15K is a 100mV high sensitivity and able to measure 15KVp-p high voltage and high dynamitic range model.

Product

Ambient Single Point Kelvin Probe System

-

Anfatec Instruments AG

Anfatec Instruments AG

This single point Kelvin Probe System operates under ambient conditions and is small enough to be placed in a customized glowth box. The probe head operates with an oscillating membrane and can be easily exchanged. The preamplifier is integrated inside the probe head.

Product

Termination

WTER-3N30

-

Warison Technology inc

WTER-3N30 - Warison Technology inc

Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.

Product

IGM™ Moisture Meter

FLIR MR160

-

Teledyne FLIR

FLIR MR160 - Teledyne FLIR

Featuring Infrared Guided Measurement (IGM), the MR160 helps you quickly target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The MR160 can serve as your go-to troubleshooting tool right out of the box — or as the perfect complement to any high resolution thermal camera you already own.

Product

Package Probe

Test Socket

-

MICRONICS JAPAN CO.LTD.

Test Socket - MICRONICS JAPAN CO.LTD.

Jigs for testing the electrical characteristics of devices in the final testing stage after LSI package assembly.To match the increasingly high functionality of LSIs for communications and networks, such as mobile phones and mobile devices, we provide two types of test sockets: The "J-Contacts" series suited for high-frequency, high-performance devices, and the "BeeContacts" series, spring probes with a unique structure that delivers excellent contact stability.

Product

Cryogen Free Variable Temperature Cryostat for EPR

-

Cryogenic Ltd.

Cryogenic Ltd.

We offer a variable temperature cryostat with a sample space of 40mm designed to fit between the poles of a resistive electromagnet for EPR applications. The cryostat is designed to receive standard EPR probes.

Product

High Temperature VSM probe

-

Cryogenic Ltd.

Cryogenic Ltd.

To perform measurements at or above room temperature, separate heated sample probes are offered for electrical or magnetic measurements. In normal operation, the CFMS has a continuous temperature range of 1.6 K to 400 K. With these inserts the range can be extended up to 1000 K.

Product

Linear Motion Tandem Transducer

-

Columbia Research Laboratories

Columbia Research Laboratories

The Columbia Model LMT-50 is a unitized rugged package consisting of tandem linear variable differential transformers (LVDT's) with probe assembly. The LMT-50 is designed so that the likelihood of a single failure affecting both output signals is extremely improbable. The model LMT-50 offers flight proven performance, even in the most severe environments.

Product

Multimeter Electronic Test Leads Kit

-

AstroAI Corp.

AstroAI Corp.

VERSATILE KIT includes 2 alligator clips with removable insulation, 2 extended range plunger mini-hooks with pass-through banana plugs, 2 heavy duty test probes, 2 42” lead extensionsUNIVERSALLY COMPATIBLE with either 0.16” banana plugs or shrouded banana plugs on all ends

Product

Technical Manual Probe Station

4060 150-200 mm

-

Micromanipulator Company

4060 150-200 mm - Micromanipulator Company

Micromanipulator's Tech Series Probe Station, Model 4060 is designed to provide a quality 6-inch (150mm) or 8-inch (200mm) probe station at a cost effective price

Product

Probe Series

CAPELLA Series

-

MPI Photonics Automation

CAPELLA Series - MPI Photonics Automation

MPI Photonics Automation is the industry leading provider of turnkey test solutions for the LED / Mini LED manufacturing industry. With more than 10,000 MPI probers installed worldwide, the CAPELLA series of probers have a proven track record of superior performance and reliability. The CAPELLA series probers support electrical and optical characterization of all LED product types (Vertical chip, Lateral chip, Flip-chip) from wafer to packaged die level. Whether you need a high-performance, cost-effective or specialty prober system, MPI PA has the most comprehensive range of LED wafer/chip probers to meet your exacting requirements.