Dynamic Light Scattering
measures small particle characteristics and their distribution.
See Also: Nanoparticle
-
product
Dynamic Light Scattering Systems
Since the release of the UPA in 1990, Microtrac would go on to become the preferred manufacturer of Dynamic Light Scattering instrumentation for nano-particle measurements. What makes our systems unique is our proprietary approach to Dynamic Light Scattering, which allows us to measure from sub-nanometer to several microns, in addition to, the ability to characterize the widest concentration range on the market.
-
product
Particle & Molecular Size/Charge Analyzers
Zetasizer Range
Instruments in the Zetasizer range are used to measure particle and molecular size from less than a nanometer to several microns using dynamic light scattering; zeta potential and electrophoretic mobility using electrophoretic light scattering; and molecular weight using static light scattering. The Zetasizer system is available in a range of variants, including the new Zetasizer Pro and Ultra. These two new systems offer unprecedented ease-of-use and flexibility, along with empowering user guidance and novel measurement techniques such as MADLS® and Particle Concentration.
-
product
Multi-angle Polarized Light Scattering Measurements
LISST-VSF
In-situ measurements of P 11, P12 and P22 elements of scattering Mueller matrix, (P11 is VSF) from 15-150º.VSF (P11) only at small angles, 0.05 to 10º in 32 logarithmic steps in angles.Only two detectors employed with absolute radiant sensitivity (A/W) calibration.Beam attenuation measured with optics similar to our LISST-100X.Roving Eyeball™ optics permit 1-degree resolution in angles between 15 -150º.Sampling rate at 3 seconds per measurement set (involves 3 turns of Roving Eyeball with unpolarized, vertical, and horizontal polarized laser).Daylight rejection by laser modulation.Dynamic range in VSF measurements extended via laser power modulation.Data from small and large angles in a single data stream, including depth and temperature.
-
product
Evaporative Light Scattering Detector
ELSD-LTII
The ELSD-LTII utilizes a high-efficiency LED and enhanced digital signal treatment to minimize noise and deliver optimum sensitivity for trace analysis. An innovative cell design also reduces band broadening and allows sensitivity levels below 200 picograms. The high-performance optical detection system can also be used for combinatorial chemistry and high-throughput screening applications. The new Low Temperature Evaporative Light Scattering Detector (ELSD-LTII) is an easy-to-operate, universal detector that identifies analytes with uniform sensitivity regardless of their spectroscopic properties. It is not a spectroscopic detector. Instead, it removes the mobile phase through evaporation and then makes a light scattering measurement of the dried analyte particles.
-
product
Multi-Angle Light Scattering Detectors
Since the 1990s Postnova has been a leading innovator and developer of special advanced online Light Scattering solutions for coupling with chromatographic separation systems. The first model was the PD2000 - Static Light Scattering detector for coupling with Asymmetric Flow FFF. Later on the models PN3020 SLS and PN3070 MALS have been launched. Based on these over two decades of practical experience, Postnova has collected a unique competence in the area of Laser Light Scattering and has developed the unique PN3621 MALS - Multi-Angle Light Scattering detector series. The model PN3621 MALS is a completely new type of high performance MALS detector system with a unique range of specifications.
-
product
Scattered Light Dust Measuring Devices
The reliable way to detect low dust concentrationsLight scattering by dust particles is a measurement principle that allows even very low concentrations of dust to be detected. Depending on the system-specific requirements, either forward scattering or backward scattering can be used in this context. Both measurement principles return stable and reproducible measurement results, regardless of the gas velocity, humidity, or dust particle charges.
-
product
Scattering Sensors
Scattering sensor data offers links to particulate bigeochemistry and ocean color. Sea-Bird Scientific offers a wide variety of scattering sensor configurations and measurement capabilities. Our sensors are available in single, dual, and three-measurement combinations.
-
product
Dynamic Balancing
Balancing machines of the VibroDAQ series are professional sets of tools for measuring vibrations and dynamic balancing of rotating elements in own bearings and on specialized stands.These devices are used in various industries, car workshops, repair services, and departments dealing with maintenance in various types of companies. Our balancers have also been used in scientific institutions and universities as systems for conducting research and training future engineering staff. Our devices have implemented special algorithms for balancing the grinding wheels, allowing for balancing the grinding wheels directly on the grinder.
-
product
Structural Dynamics
Structural Dynamics by OROS - bump tests, operating deflection shapes, modal analysis, and more
-
product
Dynamic Balancing Machines
Our Balancing Machines take advantage of their exclusive Soft Bearing Suspension systemand the new algorithm of the DigivibeMX M10 to reach a balancing quality grade higher than ISO G2.5
-
product
High Dynamic Receivers
ZRX
converter series with high dynamic range receivers. Typical applications are antenna measurements (OTA) and signal analysis. The ZRX Receivers are used wherever full S-parameters are not required.
-
product
Light Source
OrienTek Optical Technology Ltd.
High Precision● Highly accurate unit offering 6 calibrated wavelengths● Interchangeable connectors● Durable and reliable design● Easy-to-use interface forerror-free testing● Rubber armor protection
-
product
Dynamic Gravity Meter
TAGS-7
TAGS-7 represents the latest development in a long line of LaCoste-based airborne gravity systems, stretching back to the first successful airborne gravity flights in 1958 and building on the success of the TAGS System.
-
product
Dynamic Range Systems
For use in R&D by the satellite community and other applicationswith the most demanding imaging requirements Cameras and sensors >16bit, Actual -27bit (167dB) Full day light down to night vision radiances High, medium and low resolution options Remote access and maximum automation Low uncertainty and high precision Tungsten halogen spectrum
-
product
Light Source
UVF-210S
By traversing two light guide ends (right and left) by means of the high accuracy air cylinder, alternating irradiation of two independent positions is possible.
-
product
Light Source
FiberPal OT-3000
The OT-3220/3221 is designed for a high performance stabilized laser source, especially in practice for FTTX networking installation and maintenance fieldworks environment requirements. It is usually applied as stable laser sources for wide range of optical testers and tools in optical fiber cabling and transmission systems.
-
product
Light Meters
A light meter is a very sensitive electronic measuring device used to help monitor the illumination of any given area. Most light meter devices are small in size, simple to operate and equipped with an easy-to-read lighted screen made of special glass. Typically, a heavy-duty housing protects the light sensor inside the light meter from damage. A light meter is used for measuring brightness in lux (lx), foot candle (fc) or candela per square meter (cd/m²)measuring units. Some light meter devices are equipped with an internal memory or data logger to record and save measurements. The measurement of light intensity with a light meter is becoming increasingly important in the workplace due to safety concerns. Light measurement is also necessary to determine the best location and angle when installing and adjusting solar panels.
-
product
Street Dynamics
Street Dynamics radar speed signs, message signs, and speed trailers are proven to slow down traffic, create safer and more enjoyable communities, and save lives.
-
product
Light Microscopy
Materials Evaluation and Engineering
MEE has a variety of light microscopes with magnifications ranging from 5X to 2400X. Each microscope is connected to a camera with digital image capture for subsequent measurements and/or additional image analyses.
-
product
Dynamic Pressure Sensors
Columbia Research Laboratories
Dynamic Pressure Sensors contain low pressure measurements, high pressure transient measurements. Dynamic Pressure Sensors can measure a wide range of varying high intensity sound pressure and high level dynamic pressure events.
-
product
Light Meters
Meter reads from 0 to 1,999 foot-candles (resolution 0.1 to 1). Bright 1/2-inch-high digits make it an easy to read pocket light meter. The simplicity of the two-button operation eliminates the need to refer to directions. Functions are on/off, and range. The meter can be zeroed with the simple turn of an adjustment screw
-
product
Dynamic Mechanical Analysis
The DMA systems from Anton Paar perform dynamic mechanical analysis in torsion, tension, bending and compression at unprecedented precision. Whatever your DMA requirements are, the DMA systems from Anton Paar are efficiently and comfortably adapted to meet your needs. Use the systems for the dynamic mechanical analysis of solutions, melts, solid bars, films, foils, or reactive resins.
-
product
Dynamic Weighing System for Excavators
Loadtronic 3E
The load in the bucket is weighed during normal lifting cycle. The weighing can be started automatically or manually. The display will show the weight currently in the bucket, and the running total. Also, the number of buckets delivered is shown. The weighing system can be used as a tool toavoid over- and underloading of trucks. All loadings are stored in the main unit and can be retrieved either for printing a receipt or for transfer to PC (USB stick/ SMS). Databases of customers, materials etc. can be transferred between the office PC and the Loadtronic 3E system (using USB stick). The files can be viewed and edited in MS Office Excel or Notepad.
-
product
Light Meter
MODEL 5202
Kyoritsu Electrical Instruments Works, Ltd.
Digital Light Meter 3 ranges changeable from low to high illuminance. (200/2000/20000lux) Data hold function. Digital light meter with separate light recieving sensor and meter.
-
product
Dynamic Diffuser
Bodkin Design & Engineering, llc
When lasers are used to illuminate an object, a standing patter of laser ‘speckle’ is projected onto the target. This irregularity in illumination is detrimental to imaging systems and can increase the uncertainty in sensor measurements.
-
product
Dynamic Interferometry
4D dynamic interferometers use patented, instantaneous phase sensors to measure the shape of surfaces with extreme accuracy, despite vibration and environmental noise.
-
product
Light Meter
PLMT56
Light Meter Measures In LuxOver-Range IndicatorLong-Life Silicon Photo Diode InsideMeasurement Rate: 1.5 Times per SecondMax Range: 50,000 LuxAccuracy: +/- 5% Under 10000 Lux, +/- 10% Over 10000 LuxMax Resolution: 0.1 LuxDimensions: 7.40' H x 2.52' W x 0.96' DAccessories Included: 12V A23 Battery, Photo DetectorSold as : Unit
-
product
DYNAMIC SIGNAL ANALYZERS
900 Series
The new SignalCalc 900 Series software makes the process of defining a test, making measurements, analyzing data and generating high-quality reports easier than ever before. All setup, project, test article, and customer information is saved along with measurement data in a database. Easily search for data from different test runs and test types for analysis and report generation.
-
product
Reading Lights
Our Carat® lights offer a wide range of fully customized reading light solutions crafted for your unique needs.
-
product
Dynamic Vapor Sorption Analyzer
IGAsorp-CT
The IGAsorp-CT is a fully automated dynamic vapor sorption analyzer for the measurement of water and organic solvent isotherms and kinetics on a wide range of materials. Operating at temperatures from 5 to 85 °C and humidity values from 0 to 98 %RH, the IGAsorp-CT offers the widest combined range of any DVS analyzer. An optional internal heater allows fully programmable pre-heating and thermal desorption measurements to 350 °C.
