Product

Arbitrary Current Generator Family

PXA(e)73xx

-

VX Instruments GmbH

PXA(e)73xx - VX Instruments GmbH

The PXA(e)73xx ArbGen family features up to two simultaneously working channels with 100MS/s, 16Bit resolution and an output current up to 30mA in sink mode (at up to 30V) or ±20mA in combined source/sink mode (at up to ±10V).Every channel is equipped with 2MB memory. The whole amount of 1 million samples can be partitioned into one ore more waveform segments. Depending on the number of channels and the floating option, the Arbitrary Function Generators are built into a compact 3U PXI(e) device for 1 or 2 slots.

Product

Broadband Calibrated Noise Sources

-

Fairview Microwave Inc.

Fairview Microwave Inc.

Fairview Microwave’s calibrated noise sources cover frequency bands from 10 KHz to 18 GHz. Their performance specifications include output ENR levels ranging from 15 dB to 30 dB and typical VSWR levels as low as 1.25:1. Depending on the model, calibrated frequency points are at 10 MHz, 100 MHz, 1000 MHz, 2000 MHz and 1 GHz steps. The temperature coefficient of these noise sources is < 0.01 dB/°C and noise output variation is < 0.1 dB/%V.

Product

Noise Sources

NC1128A

-

DVTest Inc.

NC1128A - DVTest Inc.

This noise source by Noisecom produces white Gaussian noise up to +13 dBm. It contains a hermetically packaged noise diode that has been pre-selected for special performance characteristics. This module is ideal for many different applications including CATV, Secure communications, Jamming systems, OC-192 Testing, EW & EC.

Product

OEM Current Input0 to 20mA

TGPR-0800

-

Gemini Data Loggers Ltd.

TGPR-0800 - Gemini Data Loggers Ltd.

A current input data logger that is supplied uncased so that it can be built into custom applications.The TGPR-0800 can be used to record the output from a number of industry standard 4-20mA sensors. Common applications include pressure and flow rate monitoring.

Product

Low Noise Current Preamplifier

SR570

-

Stanford Research Systems, Inc.

SR570 - Stanford Research Systems, Inc.

The SR570 is a low-noise current preamplifier capable of current gains as large as 1 pA/V. High gain and bandwidth, low noise, and many convenient features make the SR570 ideal for a variety of photonic, low temperature and other measurements.

Product

High Current SMU

-

VX Instruments GmbH

VX Instruments GmbH

Source and Measurement Units (SMUs) are devices that generate voltages or currents and can measure them simultaneously using the integrated measurement units (VMU, CMU).High current SMUs operate as a regulated power source and are able to generate very high output currents as pulses.

Product

Tunable CW Laser Source

IQTLS

-

Quantifi Photonics Inc.

IQTLS - Quantifi Photonics Inc.

The IQTLS is a continuous wave (CW) laser source combining high-power output, narrow 100kHz linewidth and 0.01pm resolution tunability. Available in single or dual laser configurations, this tunable laser source can be controlled locally via USB or Ethernet ports and is SCPI VXI-11 compliant.

Product

Current Analyzer Control And Automation App

BV0013B

-

Keysight Technologies

BV0013B - Keysight Technologies

Intuitively control your current analyzer, build automated tests, and log data easily with BenchVue current analyzer software app for deeper current analysis.

Product

Current To Pressure Measurement Trainer

-

Unitech Scales And Measurements Pvt. Ltd

Unitech Scales And Measurements Pvt. Ltd

Current to Pressure Trainer. This setup comprises of a I to P converter fitted on a base. Two pressure gauges are fitted one at the input side and the other at the output of the I to P converter. A current source with digital display is provided to excite the I to P converter. A constant air supply should be provided to the system at 20 PsI Pressure from a standard compressor.

Product

Current Probe Calibrator

KSZ

-

PMK Mess- und Kom­mu­nika­tion­stech­nik GmbH

KSZ - PMK Mess- und Kom­mu­nika­tion­stech­nik GmbH

Since Cur­rent Probes are often ex­posed to hard work­ing con­di­tions, a per­for­mance check is rec­om­mendedbe­fore every use. These Cur­rent Probe Cal­i­bra­tors gen­er­ate square wave pulses from 0.05 A to 1000 A with an ac­cu­racy bet­ter 1%. They qual­ify for cal­i­bra­tion and ad­just­ment of Cur­rent Probes.

Product

Current Loop Adapter

OP-1C

-

LINEEYE Co., Ltd.

OP-1C - LINEEYE Co., Ltd.

This adapter supports current loop communications.The kit incorporates a communications circuit with photo-coupler isolation and constant-current power supply of insulated type, thus realizing not only monitoring but also easy communications testing with passive or active current loop devices.

Product

Clamp type AC Current Sensor／for Low Leakage Current Measurements(ZCT Series)

ZCT-80H

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ZCT-80H - MULTI MEASURING INSTRUMENTS Co., Ltd.

*High precision clamp type ZCT sensor*Big CT window,φ80mm*AC 0～10A*Least affection from the external magnetic field and residual current

Product

In-System Programmers

-

Xeltek Inc.

Xeltek Inc.

Xeltek in-system programming tools provide a convenient method for configuring microcontrollers and various serial devices. Users could simply program microcontrollers, Flash memories, PLDs, and FPGAs via the ISP cable. Devices are programmed in the target system or target hardware, making field applications more convenient than ever. Typically, a jumper/DIP switch enables in-system programming and a set of serial programming connector (such as an IDC connector) connects the target board(s) to the ISP programmer(s).

Product

EMU & Mission Data Programmer

MS 1603

-

Meltronics Systemtech

MS 1603 - Meltronics Systemtech

The EMU – MIP programming station is used to program, read and erase mission data of Mirage 2000 Aircraft and it has additional feature of programming the Extended Memory Unit. It has 3 EMU Slots (1 Read only) and 5 Slots (1 Read only).

Product

Split type AC Current Sensor

CTF-5A

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTF-5A - MULTI MEASURING INSTRUMENTS Co., Ltd.

* Suitable for current measurements of terminal feeder. * Wire stopper is equipped for the slipping protection. * The special connector is not necessary as the output terminals are provided. * Open circuit protection and nonflammable plastic material.

Product

High Frequency Current Transformer

HFCT Ø 140mm

-

Techimp HQ S.r.L

HFCT Ø 140mm - Techimp HQ S.r.L

Techimp Clamp High Frequency Current Transformer model 140 is an inductive sensor for partial discharge measurements. It is suitable for online /off line PD tests on : large diameter cables ; grounding rod bar ; etc. A TNC termination is available to connect the Clamp HFCT 140 to the TechImp PD analyzer : PDCheck , PDBase etc. The arrow indicates the requested input current (Iin) direction to get coherent output voltage (Vout) polarity respect to ground. When the sensor is installed with the arrow directed to ground, the detected voltage signal (Vout) has the same phase of the input current (Iin).

Product

Current Measuring Instruments

-

Testo AG

Testo AG

The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks.

Product

Leakage Current Clamp Mete

-

Nanjing ELIKE Meter Co, Ltd.

Nanjing ELIKE Meter Co, Ltd.

Basic functions:AC current:20mA resolution: 0.01mA, ± (2.5%, +5)200mA resolution: 0.1mA, ±(2.5%, +5)2A resolution: 1mA, ±(2.5%, +5)60A resolution: 100mA, ±(3%, +8）AC voltage: 600V, ±(0.8%, +5)DC voltage: 600V, ±(0.8%, +5)Special functions:Auto ranging Low battery display Data hold Auto power-off Over-load protection Input impedanceDC voltage measurement: ≥10MΩ Sampling frequency: 3 times/s Maximum display: 1999 Maximum distance between clamps: 30mm General characteristics:Product colors: iron-gray and redProduct net weight: approximately 136gLCD size: 25x36mmProduct size: 183x63x29mmPower: 2x1.5V, 7#Standard accessories: packing carton and handheld bag English user's manual and battery

Product

Automated Leakage Current Tester

LINECHEK® II Series

-

Associated Research

LINECHEK® II Series - Associated Research

Our LINECHEK II Leakage Current Tester is designed for medical device manufacturers. With a feature set built around maximizing the efficiency of the Leakage Current test, LINECHEK II satisfies medical application requirements demanding up to 40 Amps of continuous line current. Use it on the bench or in a rack, from the front panel or via a PC interface to ensure your medical device is ready for global deployment.

Product

High Current Connectors

-

Panasonic Industrial Devices Sales Company of America

Panasonic Industrial Devices Sales Company of America

Panasonic’s offering includes various High Current Board-to-Board Connectors suitable for applications that require a connection to a power source/battery. These High Current Connectors have low mated height profiles, high reliability, and are manufactured with Panasonic's Tough Contact technology.

Product

Super Fast Gang ISP Programmer

448Pro2

-

Dataman, Inc

448Pro2 - Dataman, Inc

The Dataman 448Pro2 is a super fast PC based gang programmer with four independent 48-pin ZIF sockets, ISP capabilities and USB 2.0 connectivity • Up to 75% faster programming of high-capacity memory devices • Over 105,000 devices supported with new devices added monthly • Independent modules supporting concurrent programming • Intelligent pin drivers operate down to 1.8V so you'll be ready to program the full range of advanced low-voltage devices • Full ISP capabilities including JTAG compatibility • Hi-speed USB 2.0 connectivity • Easy to use software compatible with the latest operating systems including Windows 10 • Comprehensive 3 years parts and labor warranty • Free life-time software updates

Product

Noise Sources

NC1126A

-

DVTest Inc.

NC1126A - DVTest Inc.

This noise source by Noisecom produces white Gaussian noise up to +13 dBm. It contains a hermetically packaged noise diode that has been pre-selected for special performance characteristics. This module is ideal for many different applications including CATV, Secure communications, Jamming systems, OC-192 Testing, EW & EC.

Product

Primary Current Injection Test Trolley

-

SCR ELEKTRONIKS PVT. LTD.

SCR ELEKTRONIKS PVT. LTD.

SCR ELEKTRONIKS have developed primary and secondary Current injection test trolley for Switchgear manufacturers for testing of ACB , MCB , MCCB. It is low Voltage high Current source with control circuitry, digital read out for test current and trip time measurement. We can select different links of CT range as per the required test Current.

Product

Cryogenic Current Comparator (CCC)

6200A

-

Measurements International Ltd.

6200A - Measurements International Ltd.

Introducing the Model 6200A Cryogenic Current Comparator Bridge (CCC) from Measurements International (MI) – the ultimate solution for achieving the highest level of resistance calibration accuracy. With an uncertainty of less than 3 parts in 10-9, our CCC surpasses all other technology on the market.

Product

Programmable Insulation Resistance Tester

2679

-

Shenzhen Chuangxin Instruments Co., Ltd.

2679 - Shenzhen Chuangxin Instruments Co., Ltd.

Programmable insulation resistance tester Feature Resistance test range: 2512: (1µΩ—2MΩ nine shift) Variable speed test:5times/slow,10times/fast. Test accuracy:0.02%±2digits。