Product

All-In-One Infotainment RF Signal Source

AST-1000

-

Averna

AST-1000 - Averna

The software-defined AST-1000 is powered by Averna’s RF and test expertise, enabling you to generate all common radio signals (e.g., AM/FM, HD Radio and Sirius/XM), digital video signals (e.g., ATSC, CMMB and DVB-T2), and simulate all common GNSS signals (e.g., BeiDou, Galileo and GPS).

Product

High Voltage Test System

CKT-1180

-

CK Technologies, Inc.

CKT-1180 - CK Technologies, Inc.

The CKT 1180 is a High-Voltage Test System with up to 3500 VDC and 2800 VAC RMS leakage test capabilities.Originally designed for High-Speed Rail, the CKT 1180’s focus is to test assemblies that require extremely high reliability and work at elevated voltages.

Product

Controllable, Programmable AC Source Motorized

EAC / MT / SL

-

ET System Electronic GmbH

EAC / MT / SL - ET System Electronic GmbH

*Motor-controlled AC sources*Regulated motor-controlled AC source*Separate display for voltage and current*Regulated motor-controlled AC source*Separate display for voltage and current*Optional interfaces

Product

Gridded DC Ion Sources

-

Veeco Instruments Inc

Veeco Instruments Inc

Ion-assisted processes like sputtering, etching, and surface treatment depend on a beam that’s stable, uniform, and tightly controlled. Gridded DC ion sources make that happen, giving engineers the precision they need to fine-tune ion energy and current density for reliable results.

Product

10 GHz Signal Source

YIG Series

-

SignalCore, Inc.

YIG Series - SignalCore, Inc.

The SC5503B and SC5502A are designed to meet demanding low phase noise applications. This is accomplished by employing a multiple phase-locked loop architecture as well as a YIG oscillator as the heart of its synthesizer. Frequency accuracy is provided by an onboard 10 MHz temperature compensated crystal oscillator (TCXO) which can be phase locked to an external reference source if required. These modules can be used as standalone CW signal sources or as LO sources for frequency conversion systems such as the SignalCore IQ modulators and demodulators. They are designed to meet the requirements of many modern applications such as wireless device testing, software-defined radio research, point-to-point radio, multi-channel coherent systems, and other academic and military programs.

Product

High Voltage Probe

HVP-08

-

PINTEK Electronics

HVP-08 - PINTEK Electronics

*Mini Type *8KV/40MHz *1:1000 *100MΩ//3PF

Product

Low Voltage Detectors

-

HASEGAWA Electric Co., Ltd

HASEGAWA Electric Co., Ltd

Audio-signaling and light emittingAC Non-Contact Voltage TesterThe sensitivity for operation is adjustable

Product

Low Voltage Test System

CKT T1

-

CK Technologies, Inc.

CKT T1 - CK Technologies, Inc.

The CKT T1 is a compact size solid-state test system featuring 128 test points.

Product

Point Source

MK Series

-

Eastern Acoustic Works

MK Series - Eastern Acoustic Works

The MK Series is EAW’s state-of-the-art, passive, two-way systems specifically engineered for permanent installation.

Product

Precision High Voltage Meter

4700

-

Vitrek Corporation

4700 - Vitrek Corporation

The Vitrek 4700 Precision High Voltage Meter offers the highest level of measurement accuracy when it comes to high-voltage measurement equipment. Its color touch screen is surprisingly easy to use for set up and display of testing results.  Vitrek leverages DSP technology to provide outstanding AC &DC high voltage measurement accuracy, stability, repeatability and resolution.  The 4700 High Voltage Meter offers performance that rivals traditional high voltage reference dividers – yet unlike the tedious divider, the 4700 provides instant, direct, high voltage measurements in a highly portable, compact and rugged bench top enclosure.

Product

Voltage Testers

-

Shenzhen Everbest Machinery Industry Co.,Ltd.

Shenzhen Everbest Machinery Industry Co.,Ltd.

Non-contact detection of 50 to 1000V ACRugged and double molded caseSuitable for outlets or against wire insulation testingFlashing red LED light indicatorBuilt-in bright flashlight with on/off buttonConvenient size with pocket clipAuto power offSystem self testUse on 50/60Hz circuitsComplete with two AA batteriesCATIII 1000VDimensions: 158 x 21mmWeight: 48g

Product

Programmable AC Power Source

LSP-500VAC

-

Lisun Electronics Inc.

LSP-500VAC - Lisun Electronics Inc.

• Applied with the AC-DC-AC inverter technology and digital waveform synthesis & waveform feedback technology, low distortion power; • Applied with entire cycle high-precision measurement technology and high-speed sampling technologies, panel of instrument will directly and accurately displays the power output of the voltage, frequency, current, active power and power factor to achieve the integration of the source table; • Applied with SCM control and measurement technology, high intelligence; • Applied with zero output impedance technology, the output equivalent impedance is almost zero and further improve the stability of power supply; • Applied with isolated floating output technology, the power output and input have good isolation, floating output, conducive to make sure power itself safety and operator’s safety; • Perfect voltage, current anomalies and overheating protection, improve the reliability of power supply; • Applied with power limiting technology to avoid strong interference on the power grid and other electrical equipment, while facilitating reliable operation of the power supply itself; • The input voltage can be option via a toggle switch of panel mains 110V/220V; • The initial phase and end phase of the output voltage waveform can be set {0°-359° (±1°)}; • Measurement process can be programmed to control (1 to 50 memory groups, 1 to 9 steps for each memory group);

Product

Programmable Encoders

-

Baumer Electric AG

Baumer Electric AG

Free programming of pulse number, output level, SSI absolute value settings or switching speed. For end users, wholesalers and system integrators. Wide and versatile application possibilities. Reduced inventory variation, downtime, maintenance and storage costs

Product

Visible Laser Source

VLS35

-

KD Optics Ltd.

VLS35 - KD Optics Ltd.

The KD Optics VLS-35 is a pocket sized, visible source used for testing fibre optic cable installations. The unit is pocket sized with a long battery life from a PP3 battery, making it ideal for local fault finding and continuity checking of fibres.

Product

Voltage Regulation - 14V Non-PMA

-

Lamar Technologies, LLC

Lamar Technologies, LLC

Voltage Regulator 14 Volt

Product

AC Voltage and Frequency Transducers

NMTU/F

-

Metra Blansko a.s.

NMTU/F - Metra Blansko a.s.

The NMTU/F device is an AC voltage and frequency transducer with two independent analogous outputs. The A output measures AC voltage, the B output measures the frequency of input voltage. That´s why one single NMTU/F transducer is able to replace two customary transducers, thus making it possible to achieve significant savings in installation space.

Product

High Voltage Differential Probe

ADF25A

-

Link Instruments

ADF25A - Link Instruments

Permits conventional grounded oscilloscopes to be used for the display and measurement of multiple floating signals with high common mode voltages

Product

Solid State Voltage Injector

J2110A

-

PICOTEST Corp.

J2110A - PICOTEST Corp.

While it is possible to obtain high quality injection transformers with bandwidths as wide as 1Hz to 5MHz or more, in some cases this is still insufficient for some tests. For example a typical heater control loop might have a bandwidth of less than 1Hz while some linear regulators and opamp circuits can have bandwidths of up to 100MHz or in some cases even higher. For these applications, a solid state injector can provide the necessary bandwidth. A solid state injector can perform at DC, while the upper frequency limit is dictated by the components selected and the printed circuit board material and layout. It is possible to obtain a solid state injector with a working range of DC – 200MHz, though above 50MHz the interconnection between the injector and the circuit being tested can become quite critical. It is essential that ripple from the injector power supply does not dramatically degrade the dynamic range or the signal to noise ratio of the measurement. The resulting plots are often much cleaner when using a solid state injector than with a transformer injector.

Product

Precision I/V Source

MeasureReady™ 155

-

Lake Shore Cryotronics, Inc.

MeasureReady™ 155 - Lake Shore Cryotronics, Inc.

The MeasureReady™ 155 Precision I/V source combines premium performance with unprecedented simplicity for materials scientists and engineers requiring a precise source of current and voltage. Low RMS noise: from 200 nV (10 mV)/7 pA (1 µA). Bipolar, 4-quadrant power source. DC and AC modes supported up to 100 kHz*. Full scale ranges from 10 mV to 100 V (1 μA to 100 mA). 0.001% programming resolution (from 100 nV/10 pA.