Product

Time Domain Analysis

S93010B

-

Keysight Technologies

S93010B - Keysight Technologies

The S93010B time domain capability allows you to measure the time domain response of a device. The analyzer can transform frequency domain data to time domain or time domain data to the frequency domain and runs on PNA/PNA-L/PNA-X Series B models.

Product

3.4 MP Autofocus (Liquid Lens) Low Light Camera Module

e-CAM31_MI0330_MOD

-

e-con Systems Inc.

e-CAM31_MI0330_MOD - e-con Systems Inc.

e-CAM31_MI0330_MOD is a high performance, small form factor, 3.4 MP Autofocus Low Light Camera Module with Liquid Lens. It is based on AR0330 CMOS Image sensor from ON Semiconductor®. This Autofocus Liquid Lens Camera Module has slave mode for precise frame-rate control and for synchronizing two sensors. e-CAM31_MI0330_MOD – Liquid lens camera module has superior low light performance. It supports Full HD @ 60fps for maximum video performance. It also has a support for external mechanical shutter and an on-chip phase-locked loop (PLL) oscillator. The dedicated ISP performs the entire Auto functions like auto white balance, auto exposure control in addition to complete image signal processing pipeline.

Product

Light and Energy Meter

Model 656

-

OAI

Model 656 - OAI

OAI Model 656 Meter is designed for use with all mask aligners and flood exposure systems. For over 45 years, OAI is a world leader in UV Light & Energy Measurement Instrumentation used for reliable accurate calibrated control of the photolithography processes in the Semiconductor, MEMS, Wafer Packaging and Wafer Bumping Industries.

Product

IRIG Time Code Receiver & Generator Module

TCR180

-

Meinberg Funkuhren GmbH & Co. KG

TCR180 - Meinberg Funkuhren GmbH & Co. KG

The module TCR180 has been designed to receive and to generate IRIG-A/B/G, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 time codes. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements) or as an IRIG converter device. The frequency locking of the master oscillator to the time code system enables this module to generate fixed and programmable standard frequencies with high accuracy and stability. Various oscillator options allow the cost efficient implementation of different requirements concerning the accurracy of the outputs. The generator of the IMS-TCR module generates pulses per second and per minute and per hour. Four programmable outputs are also available. The pulses are synchronized to UTC-second.

Product

Single Light Beam Safety Devices

-

Leuze electronic GmbH + Co. KG

Leuze electronic GmbH + Co. KG

Single light beam safety devices can be integrated flexibly into machine concepts – particularly in constrained spaces or where no flat mounting surfaces exist. They are used for point of operation and access guarding as well as for collision avoidance. The safety sensors are available as type 2 and type 4 devices with external monitoring as well as self-monitoring type 4 devices.

Product

Multi Channel LED Light Source

LE7

-

Image Engineering GmbH & Co. KG

LE7 - Image Engineering GmbH & Co. KG

The iQ-LED is the latest development of Image Engineering. It is a multi channel LED light source that provides the possibility to generate the spectral characteristics of nearly every required light source in just one device. With its 22 different software controlled LED channels it is possible to generate a spectral match of standard light sources such as, D50, D55, D65, A, B, C etc. with very high accuracy.

Product

Time Domain Analysis

S93010A

-

Keysight Technologies

S93010A - Keysight Technologies

The time domain capability allows you to measure the time domain response of a device. The analyzer can transform frequency domain data to the time domain or time domain data to the frequency domain.

Product

Real Time Digital Filters

-

Crystal instruments

Crystal instruments

Real Time Digital Filters can be used to filter a measured signal in real time. Filter characteristics can be defined by the user to meet the requirements of a specific application.  Real-time digital filters are applied in the data conditioning phase. The filters are designed with a graphic design tool and then uploaded to the front-end for real-time calculation. The graphic design tool defines the filter performance vertical axis with a dB scale. The horizontal axis is defined as relative frequency.

Product

Light Source

UVF-205S

-

SAN-EI ELECTRIC CO.,LTD.

UVF-205S - SAN-EI ELECTRIC CO.,LTD.

By use of the light guide with the quartz sensor fiber, feed-back control and monitoring of UV irradiation intensity is possible. Also setting of UV intensity and meaurement by personal computer is possible

Product

Optical Light Sources

FLS200 Series

-

Shanghai Tarluz Telecom Tech Co., LTD

FLS200 Series - Shanghai Tarluz Telecom Tech Co., LTD

FLS200 Optical Light source could provide maximum 4 wavelengths in one unit, customer could select arbitrary four output wavelengths from 650nm, 850nm, 1300nm, 1310nm, 1490nm, 1550nm. The unit support Single mode and Multimode (50/125um or 62.5/125um MM fiber) optical cable in one unit. It could support FC, SC, ST, LC and 2.5mm universal optical connector.

Product

Time Converter

TICRO 100

-

OMICRON Lab

TICRO 100 - OMICRON Lab

TICRO 100 is a Precision Time Protocol (PTP) time converter that allows you to derive a high variety of time codes from IEEE 1588/PTP packages received by Ethernet. This enables you to easily synchronize non-PTP equipment to the PTP Grandmaster of an IEEE 1588/PTP infrastructure.

Product

Light I-V Testing for Modules

FMT-500

-

Sinton Instruments

FMT-500 - Sinton Instruments

Advanced analysis of solar modules including light I-V and Suns-Voc data. Capability to accurately measure high-efficiency modules.

Product

Light source

UVM-MP

-

SAN-EI ELECTRIC CO.,LTD.

UVM-MP - SAN-EI ELECTRIC CO.,LTD.

Measurement of maximum of 6 points is possible. By use of thee sensor amplifier box, distance between the light receiving inlet and the controller can be extended to 10 meters. Measurement start signals can be independently output by remote control. This is useful for the light source fixtures integrating shutter mechanism.

Product

Light Intensity Meter

MT-4617

-

Prokit's Industries Co., Ltd.

MT-4617 - Prokit's Industries Co., Ltd.

Measures the visible light produced by fluorescent lamp, metal-halide lamp, high voltage sodium lamp or electric incandescent lampBuilt-in precision photo diode sensor and color correction filterAutomatic and manual measured range switchingRelative and peak value measurementMeasures up to 200,000 lux / 20,000 FCExtra functions: Max./Min. value displayOver load indication/Low battery indicationAuto power offBacklightData hold, Zero calibration

Product

Long Light Source

LM-A

-

Eddy Co.

LM-A - Eddy Co.

The long light source is compatible with the LM-101 or the LMC-20. The light is supplied with a 50 watt tungsten halogen convection cooled light source which provides suffcient energy for use with narrow band pass filters or monochronomators in the wave length range of .35 to 2.5 microns. The light beam is chopped at 200 hz by a quiet, vibration free, synchronous motor. The housing also contains a secondary LED light source and detector for synchronization of the amplifier, plus an electro-mechanical shutter to block the light output when the instrument is zeroed. An internal collimating lens produces a narrow beam (<1") so the LM-A can be used in bell-jar and large coating systems.

Product

Light Source

UVM-SP-JW

-

SAN-EI ELECTRIC CO.,LTD.

UVM-SP-JW - SAN-EI ELECTRIC CO.,LTD.

Readouts of UV intensity and cumulative luminescence count are prompted either on the front panel or via the externally connected remote signal control. The UV intensity detection segment is intended to measure a specific intensity of light signals, while the cumulative luminescence count is designed to tally a cumulative count on all UV intensities measured, in conjunction with real-time calibration.

Product

Light Engines

-

Innovations In Optics Inc.

Innovations In Optics Inc.

Delivering the highest brightness and optical power available, our light engines provide optimized output solutions for a range of applications such as light guide and fiber optic coupling, fluorescence excitation, and unrivaled uniform near and far field illumination.

Product

LED Light Measurement System

-

RayClouds Photoelectric Technology Co.,Ltd.

RayClouds Photoelectric Technology Co.,Ltd.

The LED optical measurement system includes Blue Light Analyzer, Glare Analyzer, LED Light Intensity Measurement, LED Goniophotometer, Lighting Electrical Measurement System, LED LightBar Measurement System, LED Photochromic Tester.

Product

Time And Hour Counters

-

Baumer Electric AG

Baumer Electric AG

Specification of the operating times of equipment, systems and facilities.

Product

Light Soaker

MESO-11

-

Greensolar Equipment Manufacturing Ltd.

MESO-11 - Greensolar Equipment Manufacturing Ltd.

The Light Soaker (MESO) is used in photovoltaic production lines for reliability testing. Its purpose is to expose the PV panels with a constant, high intensity light to get it deteriorated. Measuring the time dependent deterioration of the electrical parameters of the PV structure the reliability parameters could be defined.

Product

Three-Pole Lighting And Surge Arrestor

PIVM12,5-275/3+0 Vseries

-

HAKEL Ltd.

PIVM12,5-275/3+0 Vseries - HAKEL Ltd.

PIVM12,5-275/3+0 Vseries is a three-pole lightning and surge arrester Type 1+2 according to EN 61643-11 and IEC 61643-11. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of both, the lightning current and the switching surge, which are generated in power supply systems entering the building. The use of the lightning current arresters PIVM12,5-275/3+0 Vseries is mainly in the power supply lines, which are operated as TN-C system. The main use of PIVM12,5-275/3+0 Vseries arrester is in structures of LPL III – IV according to EN 62305 ed.2. The marking M specifies a type of construction with removable module.

Product

Light Meters

-

Beha-Amprobe

Beha-Amprobe

An instrument for measuring the intensity of light, used chiefly to show the correct exposure when taking a photograph.