Product

Optical Tactile Surface Finish

1000Z

-

Adcole LLC

1000Z - Adcole LLC

The Adcole Model 1000-Z features both optical and tactile measuring heads to deliver high precision surface measurements of camshafts, crankshafts and turned parts. The non-contact interferometric probe greatly expands on the measurement capabilities from the diamond tipped contact probe of the standard Adcole 1000 gage, as the optical accessory can precisely measure surface finish of cam track groove sidewalls, cam track bottom grooves and more. Profilometers such as the 1000-Z quantify surface roughness and are relied on to maintain quality and identify potential problems in the manufacturing and coating process.

Product

Optical Variable Attenuator

OVA-50

-

ShinewayTech

OVA-50 - ShinewayTech

OVA-50 Optical Variable Attenuator can precisely attenuate input optical signals at 1310/1490/1550/1625nm wavelengths and directly output defined stabilized optical signals. OVA-50 is applicable in various testing situations.

Product

Saluki S5700 Series Field Comm Analyzer (SA/CA/OPTICAL)

-

Saluki Technology Inc.

Saluki Technology Inc.

S5700 Series Field Comm Analyzer combines the highest performance operating specifications and multi-functional measurements such as cable and antenna system analysis, fiber inspection, spectrum analysis, cellular signal demodulation, interference analysis, signal coverage mapping and RF/optical power measurements in a single instrument.

Product

SM & MM Quad Optical Loss Test Set

KI2724-INGAAS

-

Kingfisher International

KI2724-INGAAS - Kingfisher International

A SM & MM Quad Optical Loss Test Set used to test power, insertion loss, continuity and faults on multimode and single mode fiber optic systems at 850 / 1300 nm & 1310 / 1550 nm. In a small package, it is a powerful fiber optic multimeter / OLTS with improved test flexibility and productivity.

Product

Optical Fiber Identifier

-

Anfkom International Co.,Limited

Anfkom International Co.,Limited

It is an essential installation and maintenance instrument.By inserting the fiber into its adapter head,it can identify SM optical fibers without any damage by detecting the optical signals being transmitted through them so as to avoid the opening of the fiber at the splice point for identification and thus avoids the interruption of the service.In the presence of traffic, the intermittently audible tone is activated.The 3306A optical fiber identifier also allows relative core power display and identification of the 270Hz,1kHz and 2kHz frequencies. When they are used to detect the frequency, the continuously audible tone is activated.There are four types of adapter heads available: 0.25,0.9,3.0 and 2.0.The 3306A optical fiber identifier is powered by a 9V alkaline battery.

Product

RS-232, RS-422, or RS-485 to Fiber Optic Line Driver

Model 8277

-

Telebyte, Inc.

Model 8277 - Telebyte, Inc.

The Model 8277 is a unique asynchronous fiber optic modem whose optical interface can operate in either point to point or ring (daisy chain) configurations and whose electrical interface can also operate in point to point or multi-drop configurations depending on the user selected interface.

Product

Optical Test Lab

-

Dayton T. Brown, Inc.

Dayton T. Brown, Inc.

Every object affects or interprets light differently, so appropriate and accurate measurements are needed in order to determine how much light is being produced by a source or cast upon an object. This can be measured with respect to power requirements, as well as how the human eye interprets that light.

Product

Light-Transmitting/-Receiving Devices for Optical Communication Systems

-

Sumitomo Electric Industries, Ltd.

Sumitomo Electric Industries, Ltd.

Various light-transmitting/-receiving devices support the foundation of optical communication systems. The portfolio includes semiconductor lasers and photodiodes for optical transceiver modules and board level design, as well as wavelength-tunable lasers and optical receivers for optical coherent communication devices in the backbone systems.

Product

Co-Packaged Optical Interleaver

-

Optoplex Corporation

Optoplex Corporation

Co-packaged interleaver consists of a pair of iterleavers in the same package. There are three input ports and three output ports. The interleaver pair may contain one interleaver (Mux) and one deinterleaver (DeMux), or a pair of (Mux) interleavers, or a pair of (DeMux) interleavers. Customers can specify configurations according to their design and applications.

Product

Absolute Optical Inclinometer

A2T

-

U. S. Digital

A2T - U. S. Digital

The A2T is a single axis, digital gravity angle sensor. The A2T serves as a full 360 range absolute tilt sensing programmable level with either digital or analog output. Internally, a rotary bar coded disk is mounted to a weighted gravity driven wheel. A micro-controller strobes an LED to transfer the bar code image onto an optical linear array, then decodes the position every 2 mSec. Magnetic damping provides fast response and settling time while virtually eliminating overshoot and oscillations. An internal EEPROM stores field programmable parameters such as resolution, zero position, direction swap, and mode. This second generation design virtually eliminates the primary accuracy limitation of first generation inclinometers, which is sitation (hysteresis).

Product

Mini Optical Power Meter

TM537

-

T&M Tools Limited Co

TM537 - T&M Tools Limited Co

TM537 Mini Optical Power Meter has compact structure and stable performance and ensures high measuring precision of 850nm, 1300nnm, 1310nm, 1490nm, 1550nm and 1625nm wavelengths. Used together with Optical Laser Source, it could accurately measure the loss of bier,cable and other passive optical devices.

Product

Fiber Optic Sensors And Fiber Optics

-

Baumer Electric AG

Baumer Electric AG

Over 350 customized fiber optic solutions. Smaller, more precise, faster. Robust - High-temperature, chemically resistant, mechanically robust glass or plastic fibers. Better performance - Position-independent detection of irregular objects or liquids. Plug & Play - Intuitive parametrization with the Baumer Sensor Suite via IO-Link.

Product

2-MGEM Optical Anisotropy Factor Measurement System

-

Hinds Instruments, Inc.

Hinds Instruments, Inc.

The 2-MGEM Optical Anisotropy Factor Measurement System is a normal-incidence polarization reflection microscope designed to measure the sample Mueller matrix and is a 2008 R&D 100 Award Winner. This system is designed specifically to evaluate the Optical Anisotropy Factor (OPTAF) of cross sections of TRISO nuclear fuel pyrocarbon layers. Other possible material characterizations include measuring Mueller matrix elements of other crystals, carbon compounds, and thin film coatings (e.g. surfacedeposition films) at normal incidence. The 2-MGEM can also measure retardation (d), circular diattenuation (CD) and the polarization factor (ß). These parameters are not measurable using older techniques, since those techniques do not incorporate a compensating optical element.

Product

Optical SpO2 Pulse Oximeter Simulator

OX-1 OxSim®

-

Pronk Technologies Inc.

OX-1 OxSim® - Pronk Technologies Inc.

Test the complete SpO2 system, including the sensor, extension cable with the OxSim® Optical SpO2 Pulse Oximeter Simulator. Slips into your shirt pocket and operates easily with just two buttons on a single AA battery. The auto-detection of the Sensor type eliminates the need to select the manufacturer oximeter under test. The optional serial communications port enables users to expand simulation settings for Saturation, Pulse Rate, and Perfusion Index, ideal for applications where a wide range of simulations is needed.

Product

Electrical and Optical & Bit-Error-Rate Testers (BERTs)

OptoBERT™

-

Optellent, Inc.

OptoBERT™ - Optellent, Inc.

The OptoBERT family of BERTs offers the best value in the industry for bit-error-ratio testing of optical and electrical components, subsystems and systems. OptoBERT family of products covers data rates from 100 Mb/s to 28.05 Gb/s.

Product

Optical Test

-

Alfamation S.p.A

Alfamation S.p.A

Optical components such as micro-lenses, diffractive optical elements (DOE), meta optical elements (MOE) and micro lens arrays (MLA) are now largely used on consumer electronics and even more optical elements need to be integrated into smaller and smaller packages. Nowadays mass-production industries key to success lies in increasing the yield by means of strongly automatized testing machines, with statistical analysis.

Product

PXI Express High Speed Optical FPGA Board

HSS-8324

-

Conduant Corporation

HSS-8324 - Conduant Corporation

The Conduant HSS-8324 Optical FPGA board provides the user with a hardware platform that is able to sustain full-duplex high-bandwidth transfers through its 8-lane Gen3 PXI Express (PXIe) interface and its 24-lane optical interface. The PXIe interface provides a theoretical maximum throughput of 8GB/s (simultaneous in and out).

Product

Uni-directional Two Outputs Optical Receiver

9112, 9182 (Out-door)

-

Hangzhou Huatai Optic Tech. Co., Ltd.

9112, 9182 (Out-door) - Hangzhou Huatai Optic Tech. Co., Ltd.

Guangtai 9112 two outputs optical receiver has the same performance and index as 9912, except without bi-directional function. Guangtai 9182 low input two outputs optical receiver has the same performance and index as 9982, except without bi-directional function.

Product

Optical Switch

FTBx-9150

-

EXFO Inc.

FTBx-9150 - EXFO Inc.

With crosstalk of –80 dB and life expectancy of 10 million cycles, the FTBx-9150 Optical Switch is ideal for bidirectional component testing, ribbon fiber testing, multichannel monitoring, remote and multiple-component testing, signal routing and bypass switching. Housed in the LTB-8-based test systems, the FTBx-9150 provides highly accurate and repeatable fiber-to-fiber switching. It offers a choice of 1x2, 1x4, 1x8, 1x12, 1x16, 1x24, 1x32, 2x2 and 2x4 configurations. Designed for minimal reflectance, the switches integrate precision optical components into a compact modular package. Both singlemode and multimode versions are available and offer a solution for all your optical switching needs.

Product

FTTH Optical Node

SRXG-2020AW

-

Hangzhou Softel Optic Co., Ltd.

SRXG-2020AW - Hangzhou Softel Optic Co., Ltd.

SRXG-2020AW, the operating bandwidth of 47~1000MHz, is a low power, high performance, cost-effective triple play, FTTH CATV optical receiver, Whether used in analog television or digital television. Products with high sensitivity optical receiver tube and  special low noise matching circuit. Receiving at high optical power can be adjusted by PAD level, played limiting output, so SRXG-2020AW within a large dynamic range of the received optical power of +2 dBm ~-21dBm, have excellent characteristics.

Product

Network Optical Channel Switch

NOCS

-

Radiantech, Inc.

NOCS - Radiantech, Inc.

NOCS ( Network Optical Channel Switch ) is a kind of tool with one or more optional transmitting ports. Its role is to switch or logically operate optical transmission line and the congregation of optical signal, simply means that you can use a optical fiber which is connected to a port and use it to connect to more ports by NOCS switch.

Product

Optical Chopper

SR540

-

Stanford Research Systems, Inc.

SR540 - Stanford Research Systems, Inc.

The SR540 chopper will handle all your optical chopping requirements?from simple measurements to dual-beam and intermodulation experiments. The SR540 has a 4-digit frequency display, front-panel frequency control, analog voltage frequency control and two reference outputs with selectable operating modes.

Product

Optical Light Source

STC-OLS201 series

-

Shanghai Stone Communication tech Co., Ltd

STC-OLS201 series - Shanghai Stone Communication tech Co., Ltd

a simple and cost-effective fiber optic tester,it is usually used together with fiber optic power meter to measure the optical loss on fiber cables. STC-OLS201 series light source provide multiple wavelength output, the wavelengths can be required on customer specific requirements (the Max wavelength is 5, such as 850/1300/1310/1490/1550nm).

Product

Optics Test Systems

MTF Measuring Device For Endoscopes

-

Optik Elektronik Gerätetechnik GmbH

MTF Measuring Device For Endoscopes - Optik Elektronik Gerätetechnik GmbH

Manual MTF measuring device for endoscopes. The measurement setup is based on modular individual components that can be arranged on a breadboard according to the type of endoscope (angle between light entrance and eyepiece).

Product

1.6T Optical Receiver Test Application

N4917DJCA

-

Keysight Technologies

N4917DJCA - Keysight Technologies

Offers fully automated stress eye calibration and receiver testing for 800G and 1.6T modules with 100G and 200G / λ optical interfaces.