Laser Diode Drivers
An integrated circuit that supplies modulated current to a laser diode in response to an input serial-data stream. (maxim-ic.com)
-
Product
MICROWAVE VARIABLE-CAPACITANCE DIODES FROM 1 to 40 GHz
-
Insight Product Company offers Microwave Variable-Capacitance Diodes with capacity coverage ratio over 10 times and operating in frequency range from 1 to 40 GHz. The p+ -n1 - n2 -n+ silicon variable-capacitance diodes are designed to electrically tune frequences and phases of microwave oscillators - parts of hybrid microcircuits that provide capsulation and protection against ambient action.
-
Product
.13u ESD diode
Impulse TSMC
-
The Impulse TSMC .13u ESD diode was made to provide ESD discharge paths when integrating third party IP in an integrated circuit design for total ESD protection. The Impulse ESD diode has been successfully used with Dolphin Technologies, Artisan/ARM, TriCN/Synopsis I/O libraries, as well as popular IP blocks from RAMBUS, Chip Idea and other quality IP vendors. A 5.5 volt reverse bias anode to cathode operational specification enables the Impulse TSMC .13u ESD diode to be the device of choice for 5 volt tolerant designs.
-
Product
Pipe Lasers
Zeta125 Series
-
Consistent precision and accuracy are ensured by the compact, robust and fully featured GeoMax pipe lasers. With functional and versatile configuration, a full range of features and a tough design, the Zeta series of pipe lasers fit all your needs.
-
Product
Hi-Q Laser RIN Analyzer
OE4001
-
The OEwaves’ HI-Q® OE4001 Optical Test Measurement System (TMS) offers a fully automated measurement of ultra-low RIN (Relative Intensity Noise) CW laser sources.
-
Product
Laser Diode Characterization Systems
-
Artifex Engineering GmbH & Co. KG
The LIV100 and LIV120 employ digitally programmable analogue end stages for flexible and accurate current control. A wide range of current end stages are available with maximum currents of 250mA for low power and telecom lasers or up to 1200A for high power laser bars. Custom units are available with even more current!
-
Product
Laser Head
5517DL
-
The Keysight 5517DL is used primarily in VME and PC based laser interferometer systems where the velocity of motion is faster, such as semiconductor lithography and flat panel applications. Please contact Keysight for custom requirements.
-
Product
Femtosecond Ti:sapphire Laser Kits
TISSA Series
-
TISSA kits contain all components of femtosecond Ti: sapphire oscillator preinstalled and tested on a breadboard and supplied with a cover box.
-
Product
SF000/B Laser Rangefinder – 50 M
28056
-
The Lightware SF000/B is an ultra-small and light open-frame LIDAR laser rangefinder designed for size and weight constraint applications. Using a time-of-flight system to make very fast, accurate distance and speed measurements. Accuracy is not affected by the color or texture of the surface, nor the angle of incidence of the laser beam. The SF000 is virtually immune to background light, wind and noise, making it an ideal sensor to detect unexpected obstacles.
-
Product
Precision Laser Distance Meter with Clinometer
TRUPULSE 200X
-
F. W. Breithaupt & Sohn GmbH & Co.KG
*Scope magnification 7-times*Field of view 100m/915m distance*LED Display*Range to non-reflecting targets 1.900m*Range to reflecting targets 2.500m*Accuracy in range ± 4cm (± 30cm to weak targets; shown in display)*Accuracy in slope ± 0,1°*RS 232/Serial interface and bluetooth (iOS compatible)*IP protection IP56
-
Product
TVS Diodes
-
Power TVS diodes provide outstanding protection for both alternating current and direct current power line applications by a Power TVS diode in a surface mount package. When compared to other devices, such as MOVs, power TVS diodes provide much better protection. Bourns provides a broad voltage range of devices with surge current ratings ranging from 3, 6, 10, and 15 kA to suit a variety of applications.
-
Product
Industrial Tech Laser
-
Lumentum offers OEM customers the widest variety of laser modules, engines, and components. These diverse lasers deliver a full range of performance with diverse features such as extreme operational performance, proprietary SESAM technology, direct-process fiber connect processes, high pulse-to-pulse stability, the highest stability and reliability, and low noise with excellent beam quality. Our lasers consistently set industry standards for reliability and longevity.
-
Product
Koheras Single-Frequency Fiber Lasers
-
Koheras single-frequency lasers are longitudinally single-mode and offer extremely low phase- and intensity noise levels. Available in the Erbium or Ytterbium wavelength ranges and with frequency conversion to many other bands.Reliability is our highest priority and the all-fiber DFB design ensures robust and reliable operation for thousands of hours.
-
Product
Semi- or Fully-Automatic Laser Repair System
LCD 6400
-
The Korima Model 6400-L offers an exceptional laser cutting system that exceeds the requirements for flat panel display, large photomask, and color filter repair. Fully automatic and remote controlled, the 6400-L comes with single, dual, or triple wavelength to achieve optimum results in the removal of aluminum, chromium, ITO, and polymide on panels before or after assembly.
-
Product
Tunable Diode Laser Absorption Spectroscopy
5100P TDLAS Transportable
-
Using tunable diode laser absorption spectroscopy, the 5100P is a transportable, easy-to-use analyzer optimized to measure either water vapor (H2O) or carbon dioxide (CO2) in select gas streams.
-
Product
Planar-Doped Barrier Diode Detector, 100 kHz to 2 GHz
8471D
-
The Keysight 8471D is a low-cost, planar-doped barrier detector offering excellent performance to 2 GHz. A negative polarity output is standard, and a positive polarity is available as Option 103. A load option (Option 102) extends the square-law region to at least -10 dBm. The Keysight 8471D has a BNC (m) input connector and a frequency range of 100 kHz to 2 GHz, making it ideal for use in RF and low microwave applications.
-
Product
Laser Type Edge Detection Sensor
LD
-
Panasonic Industrial Devices Sales Company of America
The Panasonic LD Series Laser Type Edge Detection Sensor can easily measure the outer diameter of objects. It can also sense inclines, detect the notch of a wafer and judge the height of small objects.
-
Product
*Industrial Ultrafast Lasers
-
*Designed for heavy duty operation in real industry*Picosecond or femtosecond pulse duration*Tailored for micromachining, microfabrication, photovoltaics, ophthalmology
-
Product
LED Drivers
-
ST offers a large portfolio of energy-efficient DC/DC powered LED driver ICs for general lighting, display LED backlighting, automotive exterior and interior lighting, RGB and monochromatic LED drivers for signage and traffic signals.
-
Product
Phasecam Twyman-Green Laser Interferometers
-
PhaseCam dynamic Twyman-Green laser interferometers provide high resolution measurements despite vibration and air turbulence. Dynamic Interferometry® enables PhaseCam laser interferometers to capture full wavefront measurements in as little as 30 microseconds—5000 times faster than conventional phase shifting interferometers. Compact and lightweight, PhaseCams make reconfiguring test setups simple and easy, without vibration isolation.
-
Product
Laser Spectroscopic Motor Exhaust Gas Analyzer
MEXA-ONE IRLAM
-
The MEXA-ONE IRLAM is an analyzer for the direct, simultaneous real-time measurement of the four relevant nitrogen-containing exhaust gas components NO, NO2, N2O and NH3.HORIBA's innovative infrared gas analysis technology, IRLAM™ (Infrared Laser Absorption Modulation), enables low-noise, high-precision measurement of four nitrogen compound gases (NO, NO2, N2O, NH3) in the low concentration range.
-
Product
Laser Beam Alignment
-
The alignment product line provides full solutions for applications such as: alignment of laser cavities, straightness measurement, machine alignment, wide-bed printers alignment and others. The AlignMeter system simultaneously measures incoming laser beam position (in µm) and angle (in µRad).It is a powerful compact device perfect for alignment monitoring, for testing the drift, centration and beam alignment relative to the outer housing or tube.
-
Product
Femtosecond Laser
ALCOR
-
Spark Lasers’ ALCOR is specifically designed for two-photon excitation. It offers clean femtosecond pulses with the highest guaranteed peak power on the market, in an unprecedented compact format and with fixed wavelengths at 780, 920, 1040 and 1064 nm.
-
Product
Handheld Laser Power & Energy Meter
Vega 7Z01560
-
*Compatible with all standard Ophir Thermopile, BeamTrack, Pyroelectric and Photodiode sensors*Brilliant color large size TFT 320x240 display*Clear screen color for work with laser safety goggles*Illuminated keys for working in the dark*Both digital and analog needle display*USB and RS232 output to PC with Statistics package*Select between English and Japanese interfaces*Analog output*Soft keys and menu driven functions with on line help*Log every data point at up to 4000Hz with pyroelectric sensors*Non-volatile data storage up to 250,000 points*Laser tuning screen and power log*2 position kickstand*System Integrator Tools included: LabVIEW VIs, COM Object Interface
-
Product
10G Distributed Feedback Lasers
-
Macom Technology Solutions Holdings Inc.
MACOM’s Distributed Feedback (DFB) laser diodes are designed for direct modulation uncooled operation up to10Gb/s. These products utilize patented Etched Facet Technology (EFT) for exceptional reliability with the following benefits: *Etched Facet Technology enabling high performance and product uniformity*Wide operating temperature range for wireless, PON and datacenter applications*No isolator required due to high back-reflection rejection
-
Product
SiC Diodes
-
ST’s silicon carbide diodes range from 600 to 1200 V – as single and dual diodes – and feature unbeatable reverse recovery characteristics and improved VF. Available in a wide variety of packages, from D²PAK to TO-247 and the insulated TO-220AB/AC, they offer great flexibility to designers looking for efficiency, robustness and fast time-to-market. ST’s SiC Schottky diodes show a significant power-loss reduction and are commonly used in hard-switching applications such as high-end-server and telecom power supplies, while also intended for solar inverters, motor drives and uninterruptible power supplies (UPS). ST’s automotive-grade 650 and 1200 V SiC diodes – AEC-Q101-qualified and PPAP capable – feature the lowest forward voltage drop (VF) on the market, for optimal efficiency in electric vehicle (EV) applications.
-
Product
SCR Diode Testers
-
SCRs and Diodes are used in the power sections of various power systems. A SCR Diode Tester is an important piece of equipment to determine if a SCR or a diode is defective in a power circuit. It is difficult and time-consuming to troubleshoot SCRs and Diodes with a digital meter.
-
Product
Osram Direct Emission Green Laser Diodes (510 - 530nm)
-
The Optoelectronics Company Ltd
The PLT3 520D laser diode can deliver 140mW pulses at 520nm with 8% efficiency, driven at 300mA at 50% duty cycle – OSRAM's previous limit was 80mW with the PL 520B. This new diode has been developed to work in MEMS-based scanners.
-
Product
LED Driver Automatic Test System
ATE-2
-
•This system includes 2 groups (left and right); the 2 groups can work in turn, so that to improve the work efficiency. For example, if the left is on working, then the right can make wire connection. •It can test 4 LED drivers input and output at one time. •The equipment can connect with electronic load and LED load, the two difference loads can be fast switch under the control of computer. •Enable to print out the series number and parameters of sub-quality products by working with a micro-printer, •Enable to achieve the bar-code record function by working with a bar-code scanner. •The test report can be saved as Excel file for consult, statistic and analysis purpose. •Good software interface to freely choose the difference parameters combination, so that to meet different demands. All the parameters can set limit, and with the quality analysis function.
-
Product
3D Laser Scanning Systems
-
3D laser scanning is a construction, engineering, and architectural tool often used to document the existing conditions (as-builts) of any structure.
-
Product
Laser Head Cable, 7 m
10881E
-
Provide reliable power with this spade lug that connects the laser head to multiple laser boards.
