Code
See Also: Programming, Scripts
-
Product
C07A THT Horizontal | Threaded | With Shaft
C07A-1xxx-20/30xx
-
Compact coded switch with HEX, Gray or BCD coding, up to 16 position, up to 3.5 Ncm switching torque and perfect for rugged environments
-
Product
MAX31855 T-Type Thermocouple Arduino Shield
SEN-30004-T03
-
Four channel MAX31855 digital thermocouple Arduino Shield. Two versions of this shield are avaliable for each thermocouple type: either 'Ch 0-3' (CS pins use Uno/Mega IO pins 7-10) or 'Ch 4-7' (CS pins use Uno/Mega IO pins 3-6), with the only difference being which set of zero-ohm resistors are populated on the board. This allows use of other SPI devices that may be 'hard coded' to specific digital pins on the Arduino, or simply stacking one of each type together to get a total of eight thermocouple channels on one Arduino.Each order comes with one board and a set of four female, long extension, headers that can be soldered to the board. If stacking two of these modules on top of each other, please order both a Ch 0-3 and a Ch 4-7 board, as well as an additional set of headers for stacking. We're working on sourcing even longer headers, but the ones currently available are not long enough to stack as-is (they need to be double-stacked).The MAX31855T supports a measured temperature range of -270C-400C with known thermal characteristics and output resolution of 0.25C. Included thermocouple connectors are type-specific to provide proper material continuity as close to the IC as possible. The SEN-30004 is interfaced via 3 or 4-wire SPI and a high-speed level shifter is included to allow the board to plug directly into an Arduino Uno or MegaNote: we also offer a universal version of this board in a smaller for factor, the SEN-30003-T.FeaturesType-specific, miniature-sized vertical thermocouple connectors (vertical flat blades, see pics)Measures four (4) thermocouple channels, full extended range.Boards are stackable. Up to 8 thermocouple channels may be connected to an Arduino.14-bit SPI interfacePlugs directly into an Arduino Uno or Mega form factor with built-in voltage level translation on-board.Standard Arduino female headers required for easy configuration, one set included with order (1-6x1, 2-8x1, 1-10x1 0.1" female stackable headers), not soldered on.Detects shorts to GND or VccDetects open thermocoupleOther versions available (K, J, and T stocked). Contact Customer Service to place a custom order.Mounting holes for 4-40 sized screwsConnections are spaced for 0.1" pin headerDesigned, manufactured, tested and shipped from the USA The MAX31855T supports a measured temperature range of -270C-400C with known thermal characteristics and output resolution of 0.25C. Included thermocouple connectors are type-specific to provide proper material continuity as close to the IC as possible. The SEN-30004 is interfaced via 3 or 4-wire SPI and a high-speed level shifter is included to allow the board to plug directly into an Arduino Uno or Mega
-
Product
Shuttle Bus PMC Intelligent Interface Card
IIB-SB-PMC
-
The Shuttle Bus PMC is an intelligent interface card providing all Launch Data Bus, Ground Data Bus, Multiplex De-Multiplex Multiple Remote Terminal, and Ground Data Bus (GDB)capability to the Shuttle Bus, together with a Pulse Code Modulation Mode. This card provides all features and functions required in a PMC platform, withSimplex & Half-Duplex modes provided. Specific operational modes provided include for LDB_BCT, LDB_MRT, GDB_BCT, GDB_MRT, BUS_MON, MDM_MRT, Primitive and Calibration modes.
-
Product
Emulsion Mixers
4818
-
Parker Conflow’s Code 4818 is a unique emulsion mixer which supplies a constant, accurate mix ratio of soluble oil and water to provide fire-resistant hydraulic fluid to power roof supports on the coal face.
-
Product
Electric Fence Chargers
Mark 8
-
Parker McCrory Manufacturing Co.
The all new Mark 8, low impedance fencer gives you the stock holding power that you have always wanted. Shocks right through wet weeds or brush and over extremely dry ground. Features Parmak`s exclusive built-in DIGITAL performance meter that tells you the exact condition of the fence. Takes the guesswork out of electric fencing. 100% solid state, with all new low impedance, uni-junction circuitry. No moving parts. Ideal for use with high tensile single or multi-wire fences. New color coded fence and ground terminals. Red to the fence and Black to ground. The Mark 8 operates for less than 7 cents a month at 7 cents per kwh. Fuse protection, with new built-in lightning arresters. Full 3 year warranty covers damage caused by lightning.
-
Product
Kalypso-Military Grade Secure Messaging Application
-
Secure Messenger Application (Code name : Kalypso) is a revolutionary Application designed to provide its users with end-to-end secure communication (Text, Voice and Video) using proprietary robust communication protocol / 256 bit military grade encryption algorithm with an On Premises Server.
-
Product
Cable Assembly 15-Pin D-Type, Female to Unterminated With Cut Ends, 0.5m
A015DF4-C-0A050
Cable Assembly
The 15-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 19/0.18 (21AWG) Tinned Copper Wire. The connector can be secured to the associated product by screwlocks. The unterminated connections are coded to match the connector pin designation. When using this product additional cable strain relief arrangements may be necessary and appropriate electrical safety precautions should be observed.
-
Product
Switch Probe F86317T140N150
1030750
-
The F86317T140N150 Switch Probes, designated with the order code 1030750, are designed for precision and reliability in various applications. The careful engineering behind these probes ensures they provide optimal performance, facilitating accurate measurements. This model is part of a family of products tailored to meet the rigorous demands of modern technology, enhancing operational efficiency in both industrial and laboratory environments.
-
Product
FWZVF3
1005354
-
The FWZVF3 is a specialized tool designed for precise applications in various mechanical settings. As per the original description, it categorizes under Tools and Equipment, specifically within the Threaded Probes toolkit. This model, recognized by its order code 1005354, is engineered with meticulous attention to the dimensions and usability required for intricate operations.
-
Product
Step Probes (F756SP) F75689B0009G150SP
1056590
-
The Step Probes (F756SP), identified by the order code 1056590 and model F75689B0009G150SP, offers exceptional performance in precision measurements and electrical applications. Designed with a pitch of 2.54mm, this probe operates effectively in extreme conditions, with a temperature range from -45°C to +200°C, making it suitable for a wide array of industrial environments. The probe features a robust construction with a plunger made from beryllium copper and a brass barrel, both plated with gold to ensure excellent conductivity and durability. Additionally, it boasts a notable continuous current rating of 5.00 A and a typical contact resistance of merely 25.00 mOhm, ensuring high reliability during operation.
-
Product
High-Power Digital Wattmeters
-
The Coaxial Dynamics High-Power Digital Wattmeters are designed for the accurate measurement of complex RF Waveforms such as CDMA (Code Division Multiple Access), DAB (Digital Audio Broadcast), DTV (Digital TV) and HDTV (High Definition TV), as well as CW, AM and FM.
-
Product
Twist Proof Probes (F756) F75611B080G150
1095045
-
The Twist Proof Probes (F756) F75611B080G150, with order code 1095045, are designed for precision and durability in a variety of applications. Boasting a pitch of 2.54 mm or 100 mil, these basic contact probes operate efficiently within a temperature range of -45°C to +200°C, making them versatile for both high and low-temperature environments. With a continuous current rating of 5.00 A and a typical contact resistance of just 30.00 mOhm, these probes ensure reliable performance in demanding electrical applications.
-
Product
Cable Assembly 68-Pin Micro-D Female to Unterminated, Cut Ends, 1m, Screwlocks
A068SFR-C-6B100
Cable Assembly
The 68-Pin Connector to Unterminated Cable Assy is constructed from 7/36 (28AWG) twisted pair wires with polypropylene insulation. The wires are colour coded to match the connector pin designation. The connector can be secured to the product by 2-56 UNC Screwlocks.
-
Product
Switch Probes (Rolling Ball Head) H888RD
1007756
-
The Switch Probes (Rolling ball head) H888RD, order code 1007756, is an essential tool designed for enhanced precision in electronic testing and measurement applications. It features a robust mechanical design, making it ideal for various uses in the tech industry where reliability and accuracy are paramount. This model incorporates a rolling ball head mechanism that ensures smooth operation and reduces wear, prolonging the lifespan of the probe and enhancing user experience.
-
Product
Basic Contact Probes (75 Mil) F07537B050P200HP
1142404
-
The Basic Contact Probes (75 mil) F07537B050P200HP, designated by order code 1142404, are engineered for high-performance applications requiring precise electrical connections. These probes demonstrate a robust operational temperature range from -45°C to +80°C, making them suitable for various environmental conditions. Equipped with a pitch of 1.90 mm, they ensure reliable connectivity with a continuous current capacity of up to 4.00 A and an excellent typical contact resistance of only 40 mOhm, thereby facilitating efficient signal transmission across devices.
-
Product
Cable Assembly, 9-Pin D-Type Male to Unterminated With Ferrules, 1m
40-972-009-1m-MU
Cable Assembly
A range of 9-Pin D-Type cable assemblies with unterminated connections at one end and constructed from PFA insulated wire. The connector assembly can be secured to the product by screwlocks. The unterminated connections are coded to match the connector pin designation and include crimped on ferrules to ensure the wire strands cannot break when they are terminated.
-
Product
MIL-STD-1553 Test & Simulation Interface for PCI Express
PCIe-C1553
-
Avionics Interface Technologies
Dual redundant, single, dual or quad stream configurationsSoftware selectable Transformer, Direct, and Bus Stub Coupling Modes - Concurrent Bus Controller, 31 Remote Terminals, & Bus monitor operation - Full error injection and detection - Multi-level triggers for capture and filtering - Ten high voltage (up from 30V) programmable DIO lines - IRIG-B time code encoder/decoder with free-wheeling mode - Real-Time recording and physical bus replay - x1 Lane PCI Express Host Interface (x4 Physical edge connector) - Application interface supporting C, C++, C#, and .NET development - Device driver support: Windows, Linux, LabVIEW Real-Time (others on request) - Compatible with AIT’s Flight Simulyzer GUI Bus Analyzer Software
-
Product
BZ-157-01-1
1030291
-
The BZ-157-01-1 is a precision tool designed for various receptacle applications, ideally suited for professionals seeking reliable and efficient equipment within the tools/equipment category. This model, designated by the order code 1030291, presents a robust design characterized by its dimensions, with a total length of 65.00 mm and an outer diameter of 3.00 mm, making it versatile for numerous applications in the field.
-
Product
LCR Meter
SS10X Series
-
LCR Meters are basic passive component testing equipment, can be used in quality management department or production process for quality inspection. Like as: transformer, inductor, resistor, capacitor, relay, motor, generator, electric valve, contactor, cable, wire, etc. This series LCR meter, offering different kind of testing fixtures, can improve testing precision and reduce the difference value of error code, being an economical and useful basic testing instrument.
-
Product
In-Circuit Debugger for Power Architecture 55xx/56xx (Nexus)
ICDPPCNEXUS
-
P&E's ICDPPCNEXUS for Windows is a powerful tool for debugging code on a Freescale MPC55xx/56xx processor. The debugger comes with P&E's PROGPPCNEXUS flash programmer.
-
Product
Pogo Connectors (≤ 1,27mm / 50mil) P06011B040G035L010
1111356
-
The Pogo Connectors P06011B040G035L010, with order code 1111356, are designed for high-precision applications requiring reliable electrical connections. With a pitch of 1.27mm (50 mil), these connectors are adaptable to various configurations, making them suitable for compact electronic devices. Their ability to function in extreme temperatures ranging from -45°C to +100°C enhances their versatility, allowing use in diverse environmental conditions. The connectors boast a maximum travel of 0.22mm and identifiable specifications such as a preload of 0.10cN and spring force of 0.30cN, ensuring consistent performance during operation.
-
Product
C++ Test Aider
Testwell CTA++
-
Testwell CTA++ is a tool for unit testing C++ classes, libraries and subsystems. The tool is easy to use and provides very powerful features helping the tester to build the testing environments and running the tests on C++ code. Testwell CTA++ is used for building testing environments, test beds, for the code under test (C++ classes, libraries, subsystems, APIs) and then executing the tests with the test bed.
-
Product
Cable Assembly, 37-Pin D-Type, Male to Unterminated With Tinned Ends, 0.5m
A037DM5-T-0A050
Cable Assembly
The 37-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 19/0.18 (21AWG) wire and can be secured to the product by screwlocks. The unterminated connections are coded to match the connector pin designation . Please ensure appropriate electrical safety precautions are observed when using this product.
-
Product
Basic Contact Probes (100 Mil) F10033S090L060
1084615
-
The Basic Contact Probes (100 mil) F10033S090L060, with order code 1084615, offer exceptional performance and reliability in a wide range of applications. Engineered to operate efficiently within a temperature range of -45°C to +80°C, these probes provide versatile use in various conditions. The design features a precision contact with a typical contact resistance of only 20 milliohms, ensuring optimal electrical connectivity and minimizing energy loss.
-
Product
20-Pin GMCT Cable, Male to Unterminated, Cut Ends, 10A, 0.5m
A020GMR-C-0C050
Cable Assembly
The 20-Pin GMCT cable assembly is constructed from 19/0.254 (18AWG) Tinned Copper Wire with PFA insulation. Screwlocks are provided to secure the connector to associated product. The unterminated connections are coded to match the connector pin designation. Users may need to make their own cable strain relief arrangements when using this product and should ensure appropriate electrical safety precautions are observed.
-
Product
IRIG Amplitude Modulated Time Code Distribution Amplifier
1205A / 1205A-MC
-
Precise Time and Frequency, Inc.
The ptf 1205A is a 12-channel IRIG amplitude modulated time code distribution amplifier housed in a 1U high, 19″ rack package. The ptf 1205A uses an RF design combining the latest technology in low noise components to minimize input/output delays which are of the order of nano seconds.The unit uses two stages of input signal buffering to distribute the input signal to 12 separate outputs, and insure maximum isolation between individual output signals.
-
Product
Pogo Connectors (≤ 1,27mm / 50mil) HP067WW09
1041293
-
The Pogo Connectors (≤ 1,27mm / 50mil) HP067WW09 are precise and compact connection solutions specifically designed for applications requiring superior reliability and durability. With a total length of 19.50 mm and an outer diameter of only 0.94 mm, this connection type ensures ideal fitment in compact spaces while providing robust flux-proof connections through wire wrapping technology. This particular model, identified by the order code 1041293, is part of the P / P067-L114 family, indicating its suitability for a range of technical uses.
-
Product
Oscilloscope
MOSTS6
-
*MOSTS6 is the first Russian instrument (oscilloscope) with a direct sampling rate (8bit ADC), 5 Gigasemp / s per channel. M-module MOSTs6 is designed to work as a part of information measuring systems based on the VXI bus magister as a digital oscilloscope. The M-module is made in the form of a triple-width mezzanine, is installed on a mezzanine carrier and is connected to it via a local information highway.*MOSTS6 is designed to convert instantaneous voltage values of an electrical signal into a digital code, measure instantaneous voltage values, measure time intervals between two instantaneous voltage values through two independent channels.MOSC6, according to the conditions of use, meets the requirements for measuring instruments of group 3 in accordance with GOST 22261-94.
-
Product
Intelligent Interface Card
IIB-1553-PC104+
-
The IIB-1553-PC104+ is an intelligent interface card giving full MIL-STD-1553 test, simulation and bus analysis capability on the PC104+ bus, providing 1553A, 1553B, McAir and STANAG 3838 variants in a single card. The IIB-1553-PC104+ supports concurrent Bus Controller (BC) and up to 31 Remote Terminals (RT) with Bus Monitor (BM). An additional stand-alone Chronological Bus Monitor (CBM) facility is also provided, with comprehensive multi-level triggering capability. Full error injection capability is provided in BC and RT modes, with full error detection in BC, RT, BM and CBM modes. The unit provides a variable amplitude dual redundant 1553 interface. 2 Mbytes of dual ported RAM are provided. The board is supplied with C drivers in source code and Windows menu driven software as standard.
-
Product
PNA-X Measurement Receiver for Antenna Test
N5264B
Receiver
A new industry standard for antenna test with 400,000 point per second data acquisition on all five measurement channels Twice as many receivers available compared to any other antenna receiver on the market Replace existing 8530A and 8360 solutions for a system speed improvement that is 10 times faster Built-in 8510/8530A code emulation software provides a drop-in replacement for existing antenna ranges utilizing an 8530A
