Product

Non-contact Optical Installation for Control of the Shape of Castings

-

ViTec Co. Ltd

ViTec Co. Ltd

To develop an installation for the control of the shape of plastic castings in production. The installation must control the shape of the part by comparison with the sample. The installation should be designed for use by technical personnel and provide the ability to automatically select a sample for comparison from a small set.

Product

Active Optics

-

Radiall s.a.

Radiall s.a.

Radiall designs and manufactures end-to-end optical links for massive data transfers in harsh environments.

Product

Optical Communication Probes

-

TransData, Inc.

TransData, Inc.

Abacus Electrics ANSI Type 2 optical probes utilize infra-red LED technology to provide a galvanically isolated, bi-directional communications interface between energy meters and laptop computers or handheld devices for onsite data retrieval, programming and diagnostics.

Product

1 Channel VGA Over Fiber Transmitter and Receiver Extender

L-1VGA-FE

-

QuestTel

L-1VGA-FE - QuestTel

The QuestTel L-1VGA-FE Fiber Optic Transmitter and Receiver provides long haul transmission of high resolution VGA and Audio control signals over a single fiber up to 20km.

Product

Omega Fiber Optic Connector

-

Teledyne Marine Impulse-PDM

Teledyne Marine Impulse-PDM

Teledyne lmpulse-PDM's Omega Series offers any combination of multi-mode or single-mode optical ways and 16 AWG electrical ways from a single way through to seven ways. Electrical pins are part of the CCP and the mating sockets are part of the FCR, CCR or BCR. Connectors populated with both electrical and optical ways will be populated in a standard Teledyne lmpulse-PDM format to facilitate interchangeability between batches. This information can be provided at the time of quotation.

Product

Optical Component Test

-

Keysight Technologies

Keysight Technologies

Keysight photonic measurement solutions offer industry-leading performance for fastest time to market of next generation photonics and for test cost reduction.

Product

Outdoor AGC Optical Node

SR812B

-

Hangzhou Softel Optic Co., Ltd.

SR812B - Hangzhou Softel Optic Co., Ltd.

SR812B optical receiver is our new development products that especially used in CATV network. The pre-amp adopts GaAs MMIC amplify module and the post-amp adopts GaAs power doubler amplify module .Support specifical attenuation and equalization inserts if you want.Or as per customer, adopts other module.With optimization design and plentiful technical experience that made this equipment with high performance specification. It is a ideal model for CATV network.

Product

Matrix Fiber Optical Switch at Single Mode Type A 1550nm with LC/PC Connector

GLSUN-MEMS-8x8

-

Guilin GLsun Science and Tech Group Co., LTD

GLSUN-MEMS-8x8 - Guilin GLsun Science and Tech Group Co., LTD

Fiber Configurations 8x8 ports Fiber Type SM, 9/125 umTest Wavelength 1530/1570 nm Operating Voltage 4.8~5.5VSwitch Type Non-latching Fiber Length 0.5m±5cmConnector LC/PC Tube Type 900 umOperating Temperature -10°C~ +70°C Storge Temperature -40°C ~ +85°C

Product

Optical Transceiver

RJ-11

-

Get Control, Inc.

RJ-11 - Get Control, Inc.

The next generation of optical transceiver has arrived with the introduction of GCI's RJ-11 Optical Transceiver. This fully SEMI compliant and Hokuyo compatible unit is the choice of leading 300mm FABs and equipment manufacturers throughout the world to simplify installation and maintenance of their E84 communications.

Product

1 10/100M/1000M LAN FTTH EPON ONU ( Optical Network Unit )

ONU-1GE

-

Hangzhou Huatai Optic Tech. Co., Ltd.

ONU-1GE - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai ONU-1GE optical network unit (ONU), based Gigabit Ethernet Passive Optical Network FTTH EPON system user side equipment, combined EPON OLT (Optical Line Terminal) via a passive optical network PON, to achieve a multipoint (P2MP) high-speed data transmission. Provides powerful data, voice and video and other broadband services to users..

Product

Fiber Optic Type Chemical Solution Concentration Monitor

CS-100F1 Series

-

HORIBA, Ltd.

CS-100F1 Series - HORIBA, Ltd.

The CS-100F1 Series is equipped with fiber optics cable based on the CS-100 Series. It offers real-time, in-line measurements by directly integrating the sample cell into the cleaning system piping and by using a fiber optic cable for light signal transmission. A single concentration monitor can take up to four measurements and monitoring of multiple chemical solutions in a single-bath or single-wafer cleaning system is also possible.

Product

IRIG Time Code Receiver & Generator for Computers (PCI Express)

TCR180PEX

-

Meinberg Funkuhren GmbH & Co. KG

TCR180PEX - Meinberg Funkuhren GmbH & Co. KG

The TCR180PEX receives IRIG-A/B/G, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 time codes and can be used for synchronizing the system time of its host PC. The IRIG output of this card can generate an IRIG signal for other IRIG time code readers. The output format is independent from the incoming IRIG signal - a perfect solution to your IRIG conversion requirements. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements) or as an IRIG converter device.

Product

Test Receiver

KH3932

-

Beijing KeHuan Century EMC Technology Co,.LTD

KH3932 - Beijing KeHuan Century EMC Technology Co,.LTD

The KH3932 EM1 test receiver is a fully automatic test receiver and the main tool for EM1 testing. The frequency range of the KH3932 receiver is from 9kHz to 300MHz. Equipped with a power absorption clamp, it can meet the power line disturbance power test. After the artificial power network is configured, the power terminal disturbance voltage test can be carried out. The machine has fast test speed and maneuverability. Strong, stable performance, convenient test data processing and other advantages. The KH3932 receiver uses the USB interface to exchange data with the computer, which makes the transmission speed fast and the bit error rate low. Connect to the computer for testing and use the operating environment familiar to the operator to improve work efficiency.The equipped operating software saves the data of a variety of external equipment, and supports plug and play a variety of external test equipment. The software and hardware are developed by our company. The whole machine uses a fully enclosed structure, and the chassis uses highly conductive materials with good shielding effects. Due to the use of specific technologies and processes, the problem of its own resistance is fundamentally solved. The measurement results are in the international general report format, which can be saved in the computer's hard disk or transmitted through the network, printed out directly, and saved using a USB storage device. The report is rich in content and can be printed directly according to user needs without additional editing.The measurement receiver complies with the requirements of the national standard GBT6113.101 and the international standard CISPR16-1.

Product

Optical Modulation Index

OMI

-

M2 Optics, Inc.

OMI - M2 Optics, Inc.

*Automatically measures OMI*Helps to optimize transmitters in just minutes*Eliminates the need for expensive equipment*Useful for multiple CATV system procedures*DOCSIS 3.1 compatible

Product

1550nm Direct Modulated AGC Optical Transmitter

HT1500A

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HT1500A - Hangzhou Huatai Optic Tech. Co., Ltd.

External modulation technology, with the laser working in direct current, has the advantages of no laser chirp, low dispersion distortion, large extinction ratio, and high speed. It also has the disadvantages of high cost and high difficulty in manufacturing.

Product

Optical Transmitter

ST1310-XX

-

Hangzhou Softel Optic Co., Ltd.

ST1310-XX - Hangzhou Softel Optic Co., Ltd.

ST1310-XX Optical Transmitter adopts high linearity ORTOL DFB laser, build-in perfect pre-distortion adjustment circuit and laser APC,ATC closed loop control circuit. All the operating parameters are controlled by micro-processor, The LCD screen on the front panel can display relative operating status and the fault information.