CompactPCI Chassis
A metal frame that serves as the structural support for a CompactPCI bus. (sbc.webopedia.com)
-
-
Product
IEEE488 (GPIB, HPIB) compactPCI Interface Card
GPIB-cPCI-XL
-
The GPIB-cPCI-XL is a GPIB controller card for PXI and CompactPCI computers.
-
Product
2U Rackmount Chassis
ACP-2320
-
2U Rackmount Chassis for ATX/ MicroATX Motherboard with Low-Profile Rear Bracket Option
-
Product
Chassis
-
Infrastructure housing for instrument cards typically containing a power supply, cooling fans and emi shielding.
-
Product
PXI Chassis for Standalone Operation
OTP2 module no.181
-
PXI chassis for standalone operation with the VPC G12 receiver, also required for mounting the Signal Routing Box
-
Product
Dual 3U CompactPCI® Subsystem with Two 6-slot Backplanes and Two CompactPCI® Power Modules
cPCIS-2642 Series
Backplane
- Dual 3U CompactPCI® Systems, each with five peripheral card slots and one system slot- 1/1 250 W CompactPCI® Power supplies- Temperature, voltage, and fan monitoring LEDs- Supports current sharing on +5 V, +3.3 V, and +12 V- PICMG® 2.11 47-pin power interface
-
Product
3U CompactPCI 32-Bit 13-Slot Backplane with Rear I/O
cBP-3213PR
Backplane
- PICMG 2.0 CompactPCI Specification Rev. 3.0 compliant- One system slot and twelve peripheral slots via cBP-*R3213 bridge boar- 10-layer PCB for accurate impedance control and electronic noise immunity- Two ATX sockets with DC screw terminals
-
Product
6U CompactPCI Three Drive Storage Module, 605x
6050
-
The 6050 6U CompactPCI Storage Module provides access to three 2.5” SSDs in a single slot. Provides direct access to each drive via front panel or RTM. Can be integrated in a multi-slot storage array via external SATA RAID controller.
-
Product
19" Configurable Panel PC Chassis For Selectable Mini-ITX Motherboard
PPC-6191C
Panel PC
19" true-flat panel PC with resistive touchSupports certified mini-ITX motherboards (up to 65W TDP processor)PCI or PCIe expansion slotsFront-facing power status LED indicatorsIP66-rated front panel
-
Product
1100 HP Water Brake Chassis Dynamometer
TD-24
-
AC power, air and water required at one side wallas applicable.• Room length, and pit location within length,must be determined by user to fit maximumtruck length and rear overhang.• Provide at least one man door for fire escapenear rear of room, but not in rear wall becausesomeone entering during a test could be struckby a stone flung from a tire. Provide ample fireextinguishers at each door and near driver.• “Back-on, Drive-off” installation configurationpreferred
-
Product
6U CompactPCI Intel® Atom® X6413E Processor Blade
cPCI-6660
Processor Blade
The cPCI-6660 Series is a 6U CompactPCI single-board computer available in single-slot (4HP) or dual-slot (8HP) width form factors, powered by the Quad-core Intel Atom® x6413E Processor. The cPCI-6660 now supports dual-channel DDR4-2400-3200MT/s memory with In-Band ECC (IBECC) for enhanced reliability. It features a 5V power input, four 2.5GbE Ethernet ports (3x RJ-45 and 1x M12 X-coded), onboard iSLC, and offers flexible storage options, including an optional 2.5" SATA drive space or mSATA, configurable by BOM.
-
Product
6U CompactPCI 10 Gigabit Ethernet Switch Blade
cPCI-6S10
Switch Blade
- ARM Cortex-A9 processor integrated in Broadcom BCM56150 switch- 24-port fully managed Gigabit Ethernet switch- Pre-installed ADLINK PacketManager accelerates packet processing- Layer 2/3 switching with advanced support for VLANs, QoS and IPv6- Two 10 Gigabit Ethernet SFP+ uplink ports- Supports IPMI based on PICMG 2.9 (System Management Specification)
-
Product
3U PXIe Chassis
6025
-
The new W-IE-NE-R PXIe 6025 series provides a fully redundant and front accessible chassis solution for performance critical applications. Built as a 19” rack-mount chassis with 7U height and low depth the chassis is outfitted with an 8 slot PXIe hybrid backplane from Hartmann Electronic. A redundant power supply design as well as cooling fan tray guarantees highest reliability & availability.
-
Product
3U CompactPCI® Subsystem with 8-Slot Backplane and 400 W ATX Power Supply
cPCIS-2630 Series
Backplane
- 400 W ATX Power supply- 3U CompactPCI® backplane with seven peripheral slots and one system slot- Temperature, voltage, and fan monitoring LEDs- Supports rear I/O backplane with P2 connectors for cPCI 50mm/80mm depth RTMs- Temperature, voltage, and fan monitoring LEDs
-
Product
18-Slot Full Hybrid PXIe Chassis
42-925-001
Chassis
Our 42-925 high-performance PXIe Chassis provides one PXIe system slot, one PXIe timing slot and 16 hybrid compatible slots for application flexibility. The chassis utilizes a single PCI segment with a dedicated PCIe-to-PCI bridge module for the hybrid slots. The PXI-specific high accuracy clocks and trigger signals are generated and controlled by an independent clock module attached to the rear of the backplane.
-
Product
3U CompactPCI Serial Blades
-
The PICMG CPCI-S.0 CompactPCI Serial standard, which evolved from the PICMG 2.0 specification, is the fastest, most versatile, most cost-effective open standard for CompactPCI (CPCI). The Serial standard is mechanically and electronically compatible with 3U and 6U euro-cards, defining an interface for high-speed switched fabrics with a star topology. Point-to-point connectors allow up to eight peripherals on one system slot without switches or bridges. Ethernet data transfer can be configured with full mesh topology, which allows up to 1000Base-T connections to all peripheral slots for redundant, safety-critical systems.
-
Product
311 HP Eddy Current Chassis Dynamometer
CM-51SR-EC
-
Weight Capacity: 25,000 lb (11,340 kg) per axleRoll Brakes: pneumatically-actuated discShipping Weight: 5,100 lb (2,312 kg)Capacity: 311 hp at 45 mph (232 kW at 72 kph)Rolls: 20 by 36 in. (508 by 915 mm) long, 2 fixedPit Required Depth: 25 in. (635 mm)
-
Product
ULI-213E - Heavy Industrial RS-232/422/485 (Terminal Block) To Single Mode Fiber (SC Connector) Panel Mount Metal Chassis
BB-FOSTCDRI-PH-SC
-
Converts serial data signals to multi- or single-mode fiber, SC connector2 KV, 3-way isolation (input, output, power circuits)Data rate: 9.6 to 115.2 kbps (bit-wise enable)-40 to +85°C wide operating temperatureIP30 metal panel mount case (DIN rail adaptable)FCC, CE, IEC-61850-3, IEEE 1613, UL C1/D210-48 VDC power source required (not included, sold separately)Note: 2 units required to extend data via fiber optic connection (see datasheet)
-
Product
No. 10A x 1/2 Phillips Pan Head for Chassis Slides/Support Angles.
HW-53
-
HW-53: Package of 100 screws No. 10A x 1/2 Phillips Pan head for chassis slides and support angles.
-
Product
4U Chassis
-
4U chassis comes in 4U 24 Bay provides enhanced storage capacity and redundant power supplies. With Multi-core processor and 8 hot-swap hard drive cages, 4U chassis offers 4U tower/rackmount server chassis designed for EATX serverboards.
-
Product
4U Rackmount Chassis For EATX/ATX/MicroATX Motherboard With 4 Hot Swap Drive Trays For General-Purpose Servers.
HPC-7442
-
Supports EATX/ATX/MicroATX motherboardShock-resistant disk drive bay provides four hot-swap 3.5" or 2.5" SAS/SATA disk trays, one slim optical disk drive, and one 3.5" internal driveWith optional storage upgrade kit installed, system equipped up to eight hot-swap HDD trays for higher storage capacity requirementSupports 80plus single and redundant power supplyFront-accessible system fan without opening top cover for easy maintenanceLED indicators and alarm notification for system fault detectionBuilt-in Intelligent system module enabling whole system fan control and remote manageability
-
Product
Rack Mount Kestrel Chassis A-Series
0072
-
ATXstyle Motherboard, 3 x 5-1/4" Bays, 2 x 3-1/2". A 10-Slot HP 1000 backplane, cooling fans, and slides are provided plus space for a standard ATX PC motherboard, diskette and hard drives (3 x 5-1/4" and 2 x 3-1/2").
-
Product
PXIe-1088, 9-Slot (8 Hybrid Slots), Up to 8 GB/s PXI Chassis
784782-01
Chassis
PXIe, 9-Slot (8 Hybrid Slots), Up to 8 GB/s PXI Chassis - The PXIe-1088 features an all-hybrid backplane to meet a wide range of high-performance test and measurement application needs. The hybrid connector type in every peripheral slot enables the most flexibility in terms of instrumentation module placement.
-
-
Product
2U 6-Slot Rackmount Chassis
ACP-2000
-
2U 6-Slot Rackmount Chassis with Front USB and PS/2 Interfaces
-
Product
1100 HP Water Brake Chassis Dynamometer
CM-51
-
AC power, air and water required at one side wallas applicable.• Room length, and pit location within length,must be determined by user to fit maximumtruck length and rear overhang.• Provide at least one man door for fire escapenear rear of room, but not in rear wall becausesomeone entering during a test could be struckby a stone flung from a tire. Provide ample fireextinguishers at each door and near driver.• “Back-on, Drive-off” installation configurationpreferred.
-
Product
1U Storage Chassis For EATX/ATX Server Board With 8 Hot-Swap Drive Bays For High-Density Storage Servers.
HPC-8108
Server Board
1U rackmount chassis support EATX/ATX motherboard8-bay hot-swappable 2.5" SATA/SAS/SSD drive bays with slim ODDSupport 12Gb/s SASIIIAnti-vibration FAN designSingle front USB2.0 port
-
Product
Portable AC Chassis Dynamometer
TD-24-AC-T
-
The TD-24-AC-T is a self-contained, portable, motorized, Chassis Dynamometer specifically designed for testing Over-the-Highway (OTH) trucks. Rated to test at altitudes up to 10,000 ft (3,048 m), the TD-24-AC-T is road-legal and offers side loading with ramps. The Portable AC Chassis Dynamometer takes less than 60 minutes to set up and begin testing.
-
Product
550 HP Water Brake Chassis Dynamometer
TD-24S
-
Weight Capacity: 30,000 lb (13,608 kg) per axleRoll Brakes: Pneumatically-actuated discShipping Weight: 8,700 lb (3,946 kg)Capacity: 550 hp at 35 mph (410 kW at 56 kph)Rolls: 24 by 34 in. (610 by 864 mm) 4 front fixed rollsPit Required Depth: 27 in. (686 mm)
-
Product
CompactPCI 2 Slot 1U
-
1U, 19″ Rackmount system with hot removable CPCI 3U Power Supply, four Powerful Fans and CompactPCI Backplane. The system support 6U cards Front and Rear. Additional four fans are available for optimal Front and RTM cooling solution. The Backplane is compliant with PICMG 2.0 R3.0 with 64bit 66MHz & supports boards with hot swap capability PICMG 2.1 R2.0. All five CompactPCI connectors (J1-J5) are available on the backplane. The system slot is located on the lower-slot.
