Product

Outdoor Chassis

PXI-8S

-

beltronic IPC AG

PXI-8S - beltronic IPC AG

Specifically designed after customer requirements, the PXI-8S Outdoor Chassis purpose focuses on applications in measurement technology - outdoor acoustic measurements in this case with the possibility to connect up to 64 microphones. Tailored solutions for complex customer requirements is a challenge we're facing with confidence; got yourself a mission critical application lacking that certain something? Contact us for further evaluation and eventual resolution of your problem

Product

LXI Chassis

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

Our LXI chassis allow any of our 3U PXI switch modules and many of our instrumentation modules to be controlled in an Ethernet environment. You may also be interested in our 2-Slot USB/LXI Chassis, this chassis allows most of our 1 or 2-slot PXI modules to be controlled via USB or Ethernet. Also our 4-Slot USB/LXI Chassis allow USB or Ethernet control of most PXI modules up to 4-slot width. For more information on these chassis, you can look in the bottom part of the table below.

Product

L-Frame, CompactPCI Serial, 5 Slots, SSR, 6U, 32HP, 299mm

632V0-E05R-50FA1-000

-

ELMA Electronic, Inc.

632V0-E05R-50FA1-000 - ELMA Electronic, Inc.

CompactPCI Serial System Type L-Frame with 5 Slots: 4x CompactPCI-S.0 Peripheral Slots and 1x CompactPCI-S.0. 1x 550W ATX, air-cooled with fan fix-mounted.Vertical backplanes and have a 160mm card cage in the front and a 80mm rear I/O.

Product

Electronical Load Board 3U CompactPCI (conduction cooled)

046-712

-

ELMA Electronic, Inc.

046-712 - ELMA Electronic, Inc.

The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane.

Product

For Conduction Cooled ΜTCA Chassis

UTC003

-

Vadatech Inc

UTC003 - Vadatech Inc

The VadaTech UTC003 is the most feature-rich MCH (MicroTCA Carrier Hub) for the Conduction Cooled μTCA chassis in the market. It’s management software is based on VadaTech’s proven Carrier Manager and Shelf Manager. The MCMC manages the power modules, the two CU (Cooling Units) and up to 12 AMCs within the μTCA chassis. It also interfaces to and manages the on-board fabric interfaces. The module is available with PCIe, SRIO, 10GbE Layer 3 managed, and GbE Layer 2 managed. The UTC003 runs Linux 2.6 on it’s MCMC CPU and is hot-swappable and fully redundant when used in conjunction with a second instance of the module. The firmware is HPM.1 compliant which allows for ease of upgrade. The UTC003 provides Fabric (100 Mhz HCSL) clock to each AMC.

Product

3U CompactPCI Plus IO 8-slot SSR with power bolts

036-777

-

ELMA Electronic, Inc.

036-777 - ELMA Electronic, Inc.

3U CompactPCI PlusIO Backplane 8-slot, PICMG 2.30 based hybrid Backplane, CompactPCI system slot right (PICMG 2.30), 4 CompactPCI slots 32 bit, V(I/O) +5V, 4 CompactPCI Serial slots PICMG 2.30 based slots, Rear I/O only in the peripheral slots

Product

cPCI-6640 Series 6U CompactPCI Processor Blade

20040259

-

ELMA Electronic, Inc.

20040259 - ELMA Electronic, Inc.

The cPCI-6640 is a 6U CompactPCI processor blade featuring an 8th/9th Gen Intel® Core™ with Mobile Intel® CM246 Chipset. Dual SO-DIMM slots provide up to 64GB of DDR4-2666 dual-channel memory (2x 32GB modules). ECC memory is also available when paired with a supporting CPU.

Product

3U CompactPCI Serial 9-slot SSL w/o RTM w/ Ethernet

1CPCIS-309-L200

-

ELMA Electronic, Inc.

1CPCIS-309-L200 - ELMA Electronic, Inc.

3U CompactPCI Serial Backplane with 9 CompactPCI S.0 slots, system slot left, without rear IO : 1x CompactPCI S.0 CPU slot, 8x CompactPCI S.0 peripheral slots, without connectors for Rear Transition Modules (RTMs), Ethernet full mesh.

Product

M-Module Carrier for CompactPCI (3U)

i3000

-

AcQ International

i3000 - AcQ International

The i3000 M-module Carrier for CompactPCI features a 3U form factor CompactPCI gateway to the M-module interface. One M-module mounting socket is provided by this carrier. This carrier can be used in temperatures from -40°/+85°C. The M-module interface of the i3000 complies to the M-module Specification ANSI/VITA 12-1996. The interface features A8, A24, D16 and D32 access types.

Product

3U CompactPCI Single Board

CP32104

-

LinkedHope Intelligent Technologies Co.,Ltd.

CP32104 - LinkedHope Intelligent Technologies Co.,Ltd.

CP32104 is a 3U CompactPCI single board, low power, small size, high integration, high reliability embedded computer module compliant with PICMG® CompactPCI specifications.CP32104 offers a variety of processor options enabling customers to choose such as D2550、N2600 and N2800. The onboard memory, flash and SATA make sure CP32104 with good anti-shock and vibration performance.The design and production of CP32104 are controlled by full life-cycle management, so CP32104 can be long time available, as ensures maximum support for the maintenance of long life programs.Benefit from its high performance/power ratio, CP32104 works stably in extended temperature range, and is an ideal selection for high reliability and high availability required applications, like harsh environment communication, network security, video/image processing and can also be an ideal control unit in variant devices and equipment.

Product

CompactPCI 6U 64 bit ATX 8 slot, P1s P2l, RoHS

102CPCI608-40X0R

-

ELMA Electronic, Inc.

102CPCI608-40X0R - ELMA Electronic, Inc.

CompactPCI 6U 8 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.

Product

CompactPCI PICMG 2.16 Backplanes

-

Comtel Electronics

Comtel Electronics

Comtel Electronics offers a large variety of CompactPCI 2.16 Backplanes, 8 – 14 slots 64 bit 33Mhz,Fully compliancy with PICMG 2.0 Rev 3.0 Specs & 2.16 Spec. Hot Swap compliant per PICMG 2.1 R2.0 Spec.

Product

3U CompactPCI Serial FPGA 10-20 ports Industrial Ethernet

SY7-CYCLONE

-

ELMA Electronic, Inc.

SY7-CYCLONE - ELMA Electronic, Inc.

The EKF SY7-CYCLONE is a CPCI Serial FPGA board with front panel connectors for up to 20x100Mbps SPE ports. It can be configured as Ethernet NIC, switch, router, or gateway.

Product

13-slot VXI Chassis

-

Holding Informtest

Holding Informtest

The 13-slot VXI crate is designed for use in modular measurement information systems based on the VXI version of the standard. The 13-slot VXI crate is designed to accommodate the system module, in the first slot, and VXI instrumental modules placed in the remaining slots, to provide their power supply, as well as to provide information interconnection via the VXIbus bus between the modules and with the control computer. The chassis meets the requirements of GOST R 51884-2002 and the document System Specification VXI-1 Revision 1.4.

Product

CompactPCI 6U 4 Slot right justified, 64 bit, P1-2s, P3-5l

105CPCI604-1157

-

ELMA Electronic, Inc.

105CPCI604-1157 - ELMA Electronic, Inc.

CompactPCI 6U 4 slot 64 bit with system slot right, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1. User defined VI/O is standard.

Product

550 HP Water Brake Chassis Dynamometer

TD-24S

-

Taylor Dynamometer, Inc.

TD-24S - Taylor Dynamometer, Inc.

Weight Capacity: 30,000 lb (13,608 kg) per axleRoll Brakes: Pneumatically-actuated discShipping Weight: 8,700 lb (3,946 kg)Capacity: 550 hp at 35 mph (410 kW at 56 kph)Rolls: 24 by 34 in. (610 by 864 mm) 4 front fixed rollsPit Required Depth: 27 in. (686 mm)

Product

Shelf Manager Mezzanine Module (CompactPCI FW)

064-757

-

ELMA Electronic, Inc.

064-757 - ELMA Electronic, Inc.

The Shelf Manager (ChMC) can be used to monitor the health of a system platform. With the ChMC it's possible to monitor voltages, temperature, fans, to control fans, GPIOs and I2C devices.

Product

Dual PMC Carrier for 6U CompactPCI

TCP262

-

TEWS Technologies GmbH

TCP262 - TEWS Technologies GmbH

The TCP262 supports standard PMC front I/O and CompactPCI rear I/O fully compatible to the TCP260. The PMC slot 2 (upper PMC) I/O lines are connected directly to the CompactPCI connector J5. The PMC slot 1 (lower PMC) I/O lines are connected directly to the CompactPCI connector J3.

Product

Compact Designed Chassis

CAMAC Mini Crate Series

-

W-IE-NE-R, Plein & Baus GmbH

CAMAC Mini Crate Series - W-IE-NE-R, Plein & Baus GmbH

The WIENER CAMAC mini crate is the perfect choice for small setups with only a few CAMAC modules. The crate offers 11 CAMAC slots in a compact designed chassis with integrated low noise power supply and cooling fan. The mini crate can be used on the desk either as a desktop or up-right unit or be installed in a 19” rack.

Product

Chassis Slide Rail Size 3

CAE014621

-

ELMA Electronic, Inc.

CAE014621 - ELMA Electronic, Inc.

Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.

Product

PXI Chassis & PXIe Chassis

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

Are you building a PXI system? We offer a variety of PXI chassis and PXI Express (PXIe) chassis available in 8 to 21 slots and different performance characteristics. These chassis are fully compliant with PXI standards and can house any vendor’s modules. Our Gen 3 PXIe chassis offers full hybrid capability on all peripheral slots, giving you the flexibility needed to choose whichever PXI or PXIe products best fit your applications.

Product

9-slot Chassis

CH-09 AXIe-0

-

Holding Informtest

CH-09 AXIe-0 - Holding Informtest

The 9-slot chassis in AXIe-0 format is intended for use in modular measurement information systems based on the AXIe standard.