Data Loggers
record electrical or physcial events.
See Also: Loggers, Pressure Loggers, Current Loggers, Dataloggers, Humidity Loggers, Temperature Humidity Loggers, Temperature Loggers, Voltage Loggers, Wireless Data Loggers, Wireless Loggers
-
Product
Comprehensive Analysis for MediaLB Data
MediaLB System
-
A MediaLB system consists of several MediaLB devices and one MediaLB controller (typically an INIC chip). The INIC serves as a transceiver for the MOST network and as a controller for MediaLB, which assures synchronization to the MOST network.
-
Product
Sensors - Stand-Alone Loggers
-
Makes it possible to measure and record the transport conditions of goods and to trace shocks as well as temperature variations.
-
Product
FactoryTalk DataMosaix For Data And Analytics
-
FactoryTalk® DataMosaix™ enables controlled access to relevant and contextualized data. It’s an Industrial DataOps solution that provides flexible and scalable tools to accelerate data usability by domain experts and analysts. FactoryTalk DataMosaix is cloud-based for multi-site, enterprise-wide access for people and applications.
-
Product
Mission Data Programmer
MS 1602
-
The MIP programmer is used to program, read and erase mission data of Mirage 2000 Aircraft. This system is micro controller based design. This system facilitates to program the four EPROM devices at a time. This system contains four read write slots and one read only slot. Read only slot used to read the device data safely. System also has capability to program the one slot device data to another slot device.
-
Product
Data Acquisition - 3U 3-Slot
DAQ-33CP0G
-
is a preconfigured rugged system with a high-performance, low power ARM® Cortex®-A9 processor. It is ideally suited to support a multitude of military/aerospace data acquisition applications that require high-density, multichannel programmable ARINC 429/575; Dual-Redundant, Quad Channel MIL-STD-1553B; CANBus (2.0 A&B or J1939); A/D Conversion; RTD Measurement; RS-232/422/485 Serial Communications Dual-Port Gig-E Ethernet.
-
Product
Track and Hold Data
-
Track and hold amplifiers are used to expand the bandwidth and/or high-frequency linearity of high-speed A/D conversion and signal acquisition systems. Track and Hold Amplifiers can be used in various applications including RF ATE Applications, Digital Sampling Oscilloscopes, RF Demodulation Systems, Digital Receiver Systems, High Speed Peak Detectors, Software Defined Radio, Radar, ECM & ELINT Systems and High Speed DAC De-Glitching.
-
Product
PCI Data Acquisition
-
PCI data acquisition product line provides 50MS/s, 500MS/s, 1GS/s and other high-speed digital conversion cards. These conversion cards feature 8- and 12-bit resolution, as well as wide bandwidth and large acquisition memory. The product line also includes PCI digitizers with on-board signal processing capabilities, and streaming firmware using the serial FPDP protocol to capture and transmit all acquired data without stalling or loss.
-
Product
PXI Data Communications Multiplexer
40-736-001
-
This Data Communications Multiplexer is designed specifically for multiplexing or de-multiplexing up to 32 differential signal pairs having controlled 100 differential impedance. The multiplexer can be configured under software control to provide switching for 32 differential pairs, 16 dual differential pairs and 8 quad differential pairs. The dual and quad versions are particular well suited for providing switching of AFDX, BroadR-Reach and Ethernet signals. To support Ethernet applications, the design includes a switching network that simplifies the swapping of Tx and Rx pairs to simulate the effect of Ethernet crossover cables.
-
Product
Multi-Sensor Core Logger
-
The Geotek Multi-Sensor Core Logger (MSCL) systems enable a suite of geophysical measurements to be obtained rapidly, accurately and automatically on sediment or rock cores. The rugged nature of the equipment makes it suitable for use in either an onshore laboratory/repository environment or onboard survey and drilling vessels. All of Geotek’s core loggers accept core between 50 mm and 150 mm in diameter and up to 1.55 m in length. Geological cores and materials come in a variety of sizes therefore the MSCL and X-ray CT systems are designed for a full range of core material in a variety of liner compositions. To accommodate varying customers’ requirements (both operational and scientific), we provide a range of different core loggers and X-ray CT systems:
-
Product
Multi-Channel Data Acquisition System
PI-3105
-
This highly flexible system is designed to test a wide variety of imaging devices, from low-noise astronomy and medical devices, to military and machine-vision devices with GB/sec data rates.
-
Product
Data Collection And Analysis Software
-
The MESUR™ software series expands the functionality of Mark-10 force and torque gauges, indicators, testers, and test stands. MESUR™ Lite is a basic data acquisition program included free with all Mark-10 products, while MESUR™gauge is a more advanced software package which also plots, calculates statistics, generates reports, and provides other analysis tools. MESUR™gauge Plus adds motion control of certain test stand models.
-
Product
Power And Data Transfer
-
Cable reels & slip ring assemblies for reliable power and data transfer in mining, construction and material handling applications.
-
Product
Full-spectrum Acoustic Logger
AudioMoth
-
AudioMoth is a low-cost, full-spectrum acoustic logger, based on the Gecko processor range from Silicon Labs. Just like its namesake the moth, AudioMoth can listen at audible frequencies, well into ultrasonic frequencies. It is capable of recording uncompressed audio to microSD card at rates from 8,000 to 384,000 samples per second.
-
Product
ATE For Data Communications Equipment
-
• Developed for DRS Codem Systems, Inc. to test the CTM-IP product line of the Multi-Interface Protocol Converter.• Manufacturing Test support for the CTM-IP chassis and Interface Modules. Functional test of signaling, protocol and software configurations for various communication interface configurations.• Regression Test support for Engineering Product Development. Configurable test sequencing allows engineer to select specific tests for execution, with the ability to exercise all combinations of data rates and interface configurations.
-
-
Product
3D Acceleration Logger Sensor
NUL-227
-
This is a 3D (three dimensions) acceleration sensor which displays each dimension one at a time. It allows measuring the acceleration of moving bodies such as a body oscillating in a spring or in a moving vehicle.
-
Product
Temperature Data Acquistion
THERMES-USB RF
-
Physitemp’s original Thermes high accuracy ISA based data acquisition system has been redesigned to create a more versatile USB model. The new system requires no internal connections to your computer and simply connects via an external USB port on your laptop or desktop computer. Two versions of the data acquisition system are available. The standard version, THERMES USB, is connected to your computer USB port. The wireless version - THERMES USB WFI, can be either directly connected to a USB port or, with the included wireless receiver, positioned up to 100 feet from the host computer. Each unit will accommodate up to 7 type T thermocouple sensors and multiple Thermes units may be connected to the same computer for more thermocouple inputs. A high accuracy electronic cold junction compensation circuit maintains typical system accuracy of ±0.2°C over an ambient temperature range of 15 to 35°C. Individual offsets may be added to each input in software to facilitate individual calibration of each channel. For information on our wide selection of Type T Thermocouple temperature probes.
-
Product
Suite Of Data Analytics Software
Umetrics®
-
The Umetrics® Suite of data analytics software gives you access to powerful yet easy-to-use tools to optimize your manufacturing processes and bring quality products to market faster. Use the data analytics software to develop robust, high-quality products, continually improve processes and maintain control during manufacturing. These tools support regulatory compliance, enable digital transformation and facilitate quality by design.
-
Product
Environmental Data Recorders
-
Whether sending a satellite into orbit or receiving a load of fresh produce, you need to know that your products will maintain their integrity during transit.
-
Product
Data Converter ICs
-
We offer a complete range of high-performance, low-power,and small-size data converter integrated circuits (ICs) for demanding industrial, automotive and consumer applications. Whether you need an Analog-to-Digital Converter (ADC), Digital-to-Analog Converter (DAC), digital potentiometer, AC and DC power and energy measurement device, voltage reference or a combinationof data converter ICs, we have the right solution for your application and world-class support to make sure you meet your design goals.
-
Product
Avionics Data Loaders
-
The Ballard DL 615 Data Loader is the modern replacement for outmoded 3½-inch floppy-disk-only ARINC 615 portable data loaders (PDL). Any PC running Microsoft® Windows® can perform data loads using the USB to ARINC 429 interface, cables, and software included with the DL 615. While being as simple to use as older floppy disk PDLs, the DL 615 provides record keeping, flexibility in data management, and powerful features for troubleshooting and enabling data loads into difficult LRUs. As an added benefit, the interface can be used as a general purpose ARINC 429 (and optionally ARINC 717) maintenance tool.
-
Product
Data Link Monitor
Listen32
-
Listen32 is a 32-bit version of Listen which includes all the above features plus the ability to launch and monitor communications from separate Win32 processes without being physically connected to the serial cable. It operates much like the Socket Spy applications, hooking the communications API within Windows by launching a target application using the Win32 Debugger API.
-
Product
The Ultimate Data Logging Solution
RTBx
-
*Automatically collect and timestamp execution data from embedded systems*Produce traces for RVS analysis*Easy to get started*Reduce post-processing effort
-
Product
Cyber Security and Digital Data Protection
-
As security demands evolve, Applied Computer Technologies provides a layered and progressive approach to security. Organizations without a sufficient security footprint are being affected and held ransom, operations disrupted, and business reputations damaged. We've partnered with some amazing and innovative companies to offer our clients the best cyber security and protection available today. Our integrated security products include next generation firewalls; ransomware and crypto malware; secure connectivity; Email, encryption, archiving, and SPAM filtering; Web and content filtering; and data integrity & theft prevention.
-
Product
Laboratory Air Data Test Sets
-
DMA is a leading manufacturer of Air Data Test Set models for laboratory use achieving the highest accuracy and resolution. The MPS46 is digitally controlled through a keyboard, it uses very high accuracy pressure sensors, with a special characterisation for maximum accuracy (for static channel < 2 feet at sea level). Pressure resolution of 0.2 Pa. is also achievable. The intuitive user interface with touchscreen display ensures that all the functions are controlled with a minimum of key presses . The ADTS can be used in avionics ATE systems (rack height only 2U) for automated pitot-static testing through RS232, USB, Ethernet or GPIB/IEEE488. An internal pump or external rack mounted pump unit can be supplied as an option.
-
Product
USB to RS-422/RS-485 Converter
ND-6530
-
ADLINK's NuDAM data acquisition modules make up a total acquisition network and control system. Up to 256 NuDAM modules an be romotely controlled on any RS-485 network from a host computer, via a single serial RS-232, allowing communication from as far as 4000 feet from the host. Based on the RS-485 multi-drop network system, each module has a unique address ID, whereby simple ASCII command & response protocols through the standard RS-485 interface can control all the NuDAM modules in the RS-485 network. The NuDAM modules provide direct communications with a wide variety of sensors, perform all signal conditioning, scaling, linearization and conversion, and can acquire measurements of temperature, pressure, flow, voltage, current, and multiple digital signal types.
-
Product
Calcium Logger Sensor
NUL-238
-
The NeuLog calcium sensor enables measurements of ionic calcium (Ca2+) concentration in aqueous samples. This measurement is very important when evaluating water quality. It can also be used to determine calcium magnesium by EDTA titration.
-
Product
Data Accquisition
-
High-performance data acquisition system that is designed to perform well during intense, demanding testing.
-
Product
Standard Loggers
-
Our standard loggers can measure up to 13 parameters. Numerous configuration options allow for maximum customization for your measurement needs. In addition to our conductivity, temperature and depth sensors, many others, including third-party sensors, can be used with our recorders. Measure salinity. Measure tide and waves. Altitude & Attitude Logger.
-
Product
Balance Data Collection Software
Balance Keys
-
Shimadzu has released Balance Keys, data collection software capable of running in Windows™ 7, Windows™ 8 and Windows™ 10, as the computer software successor to the popular WindowsDirect function. With the remarkable advancement of office and factory automation, there has been a simultaneous increase in the demand to import balance data to computers, to save on labor and to avoid transcription mistakes. Balance data can be imported directly to the user's applications with the intuitive feel of keyboard input using the existing popular WindowsDirect function as is*1. In addition, data from multiple balances (up to three balances) can be imported. The software also supports the Shimadzu MOC series moisture analyzers and the AP series analytical balances*2.
