Product

Omicron Fiber Optic Connector

-

Teledyne Marine Impulse-PDM

Teledyne Marine Impulse-PDM

Teledyne Impulse-PDM’s Omicron 5030/5070 optical connectors utilize proven small form factor ferrule technology and are available for multi-mode or single-mode operation.The connectors are offered, as standard, in stainless steel to BSEN10088-3 Grade 1.4404 (316L), which is electro-polished to remove surface contamination, thus improving resistance to corrosion. Connector bodies can also be manufactured in other materials, either to address specific anti-corrosion requirements, or to increase depth rating. Engaging nuts are normally manufactured in naval brass to UNS C46400​.

Product

Fiber Optic Sensors

-

Advanced Energy

Advanced Energy

Achieve highly reliable and precise fiber optic sensing. Advanced Energy’s Luxtron® patented FluorOptic® temperature measurement solutions and WaveCaptureTM Fiber Bragg Grating (FBG) sensing solutions feature many options to meet your application needs.

Product

Omnisens Optical Fiber And Cable Measurement And Quality Control

https://www.omnisens.com/uploads/1/2/0/5/120592129/telecom-1_orig.png

-

Omnisens

https://www.omnisens.com/uploads/1/2/0/5/120592129/telecom-1_orig.png - Omnisens

To provide quality control or help with the design and testing of fibers, Omnisens Vision offers fast, accurate strain and temperature measurements.Omnisens Vision is based on Brillouin scattering. In single mode fibers it produces precision readings with high spatial resolution over long distances and/or large loss test conditions. It is capable of high speed testing in dynamic situations such as flex fatigue.Its configuration flexibility makes the Omnisens Vision well adapted to a wide variety of test & measurement needs.

Product

Broadband Fiber Optic Light Sources

ASE Sources

-

Fibotec Fiberoptics GmbH

ASE Sources - Fibotec Fiberoptics GmbH

Broadband fiber optic light sources utilize amplified spontaneous emission (ASE) within optically pumped rare earth-doped fibers. The spectral width of such light sources can be set by the developer in a range from a few nm to the full width of the emission spectrum of the active ion (e.g. erbium ion).

Product

RF over Fiber Link TX/RX

L-Band

-

QuestTel

L-Band - QuestTel

QuestTel''s Satellite L-Band optical fiber Transmitter/Receiver set offers high pefromance and cost effective alternative to conventional coaxial systems. The L-Band Transmitter and Receiver pair is used for transporting L-Band RF over fiber from the antenna to the satellite receiver. Additionally transmitter provides optional 13/18V LNB power as well as Automatic Gain Control (AGC) to manage RF input level. By transporting the L-Band RF over fiber this range can be extended from several hundred feet to over 80 miles. Since optical signal is not affected by electromagnetic field, the quality of your signal will always stay at the high level. Also this fiber solution is more cost effective than coaxial system, as well as more reliable and flexible.

Product

Visual Fault Locator

TW3105

-

Techwin(China) Industry Co., Ltd

TW3105 - Techwin(China) Industry Co., Ltd

Pen Type is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical network.

Product

Ground Fault Monitors

IFT

-

Controlab Inc.

IFT - Controlab Inc.

In most industrial settings, ground faults can cause significant damage. Since these leaks are unavoidable in almost all industrial environments, our ground fault monitors allow you to quickly and easily find the source of the leak before a major problem occurs and damages your equipment. The IFT-120 is designed to help you rapidly locate ground faults.

Product

12-Watt Pulsed FAYb Fiber Laser

LP-V Series

-

Panasonic Industrial Devices Sales Company of America

LP-V Series - Panasonic Industrial Devices Sales Company of America

The LP-V series is a 12-watt, pulsed fiber laser.Characteristics:- Very high resolution- Fine marking area- Small air cooled head

Product

Telecom Fiber Couplers

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs offers a varied selection of single mode (SM) and polarization-maintaining (PM) fiber couplers, as well as single mode 1x8 and 1x16 PLC waveguide splitters that have center wavelengths at common telecom wavelengths, including 850 nm, 1310 nm, and 1550 nm.

Product

Detection of Earth Faults (PtG) and Short Circuit (PtP) Faults

CableTroll 2330

-

Nortroll

CableTroll 2330 - Nortroll

CableTroll 2330 is an indicator for detection of earth faults (PtG) and short circuit (PtP) faults on multi and single core cable terminations. The unit uses NorTroll type current sensors.

Product

Optical Fiber 1×4 Switch

OFSW - 1 × 4

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 4 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×4 is a 1×4 prism optical switch. It can support 1 optical fibers input and 4 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Fiber Switches

-

piezosystems jena, Inc.

piezosystems jena, Inc.

Piezo-electric driven switches are especially designed for fast switching – measured in milliseconds. Piezo actuators enable the optical switch to couple optical fibers with an accuracy of a few microns. The piezo driven optical switches are available fiber core diameters of 50 µm up to 600 µm.

Product

Fiber Tools

-

Tempo Communications, Inc.

Tempo Communications, Inc.

Used to install, maintain, and test fiber optic cables, connectors, and networks.

Product

Cable Partial Discharge (PD) Spot Testing And Locating

PrecisePD

-

IPEC Ltd.

PrecisePD - IPEC Ltd.

PrecisePD is an on-line PD Spot Testing and PD location system for Cables and Switchgear with advanced signal processing, used for the detection of PD in high noise environments.

Product

Omega Fiber Optic Connector

-

Teledyne Marine Impulse-PDM

Teledyne Marine Impulse-PDM

Teledyne lmpulse-PDM's Omega Series offers any combination of multi-mode or single-mode optical ways and 16 AWG electrical ways from a single way through to seven ways. Electrical pins are part of the CCP and the mating sockets are part of the FCR, CCR or BCR. Connectors populated with both electrical and optical ways will be populated in a standard Teledyne lmpulse-PDM format to facilitate interchangeability between batches. This information can be provided at the time of quotation.

Product

McMurdo FastFind 220 GPS PLB ( Personal Locator Beacon)

-

Landfall Navigation

Landfall Navigation

The FastFind 220 Personal Locator Beacon (PLB) uses advanced technology packed into a simple, lightweight, palm sized unit. Using the dedicated 406 MHz frequency, FastFind 220 transmits your unique ID and precise location to the global network of search and rescue satellites. The FastFind 220’s electronics design was upgraded in 2018, offering accelerated location detection with the duel GNSS capabilities — GPS & Galileo recivers. Within minutes rescuers are alerted to your situation, and receive regular position updates. Finally, emergency services can home in on your beacon’s 121.5 MHz transmission to find you. Explore the world with peace of mind. If you find yourself in a remote area without any other form of communication, activating your FastFind 220 will summon emergency assistance.

Product

Single Fiber Transceivers

-

Appointech, Inc.

Appointech, Inc.

Single strand fiber solutions are the simplest way to fiber optimization,immediately doubling the capacity of the installed fiber plant. Insteadof using two dedicated strands, one for receiving and the other fortransmitting, each strand carries a bi-directional signal. The fiberplant capacity doubles, which in turn can double the per fiber returnon investment (ROI) with no need for more physical fiber. Thesesolutions have been incorporated for many years in the Fiber Driver,MRV's Optical Multi-Service product line. Recent technologicaladvancements at MRV have yielded many new variations of thesesolutions, doubling the efficiency of fiber even down to Ethernet inthe First Mile.

Product

Matrix Fiber Optical Switch at Single Mode Type A 1550nm with LC/PC Connector

GLSUN-MEMS-8x8

-

Guilin GLsun Science and Tech Group Co., LTD

GLSUN-MEMS-8x8 - Guilin GLsun Science and Tech Group Co., LTD

Fiber Configurations 8x8 ports Fiber Type SM, 9/125 umTest Wavelength 1530/1570 nm Operating Voltage 4.8~5.5VSwitch Type Non-latching Fiber Length 0.5m±5cmConnector LC/PC Tube Type 900 umOperating Temperature -10°C~ +70°C Storge Temperature -40°C ~ +85°C

Product

Fiber Optic Type Chemical Solution Concentration Monitor

CS-100F1 Series

-

HORIBA, Ltd.

CS-100F1 Series - HORIBA, Ltd.

The CS-100F1 Series is equipped with fiber optics cable based on the CS-100 Series. It offers real-time, in-line measurements by directly integrating the sample cell into the cleaning system piping and by using a fiber optic cable for light signal transmission. A single concentration monitor can take up to four measurements and monitoring of multiple chemical solutions in a single-bath or single-wafer cleaning system is also possible.

Product

High Voltage Pultruded Resin Bond Glass Fiber Rod

-

NEO TELE-TRONIX PVT. LTD

NEO TELE-TRONIX PVT. LTD

This Test Set-Up can be used to test any kind of Drive Insulator used in Circuit Breaker.

Product

Visual Fault Locator VFL X5007

-

Shinho Optics Limited

Shinho Optics Limited

Metal case, Rugged and durableLow battery indication, to avoid leakage and wrong judgmentESD protection design, Protect the LD effectivelyIntegrated case, to avoid the case intermediate brokenRe-changeable ceramic tube, to avoid returning to manufacturer for this small faultLong battery life, up to 60 hours＠1mW

Product

Ground Fault Monitor

IFT-120

-

Controlab Inc.

IFT-120 - Controlab Inc.

Our ground fault monitors enable you to easily and quickly find the source of the fault before a major problem occurs and damages your equipment. This is the IFT-120, designed to assist you in rapid identification of ground faults.