Frequency References
See Also: References, Reference Standards, Reference Antennas, Reference Decoders, Reference Jumpers, Reference Sources, Reference Transformers, Reference Transmitters, Acoustical References, Solar Reference Cells
-
Product
Radio Frequency Probes (Automotive) HF819HSDm013G2020HSDmP
1142275
-
The Radio Frequency Probes (Automotive) HF819HSDm013G2020HSDmP is engineered for high-performance applications, offering precise functionality with its advanced coaxial design. This probe features an impressive operating temperature range of -45°C to +100°C, making it ideal for various automotive testing environments. The HF819 model is known for its robust electrical specifications, ensuring a continuous current capacity of 10A, integrated with a characteristic impedance of 100 ohms and operating efficiently up to 3 GHz frequency levels, thus enabling reliable performance in automotive applications.
-
Product
Portable Frequency Meter
SonicSniffer
-
SonicSniffer is a portable frequency meter for preventive maintenance of ultrasonic transducers and power ultrasonic stacks, primarily in cutting and ultrasonic welding fields. The SonicSniffer determines the work frequency of the ultrasonic stack analyzing the sound emitted by the equipment during operation. See in the back side of this sheet how to use this information.
-
Product
COM Express® Type 7 Reference Carrier Board in ATX Form Factor
Express-BASE7
Carrier Board
The Express-BASE7 is an ATX size COM Express Type 7 reference carrier board. Together with the COM Express Type 7 module of your choice and off the shelf add-on cards, you can quickly emulate the functionality of your desired end product for software development and hardware verification.
-
Product
Reference Cells For PIV-IV Systems
-
NREL calibrated cell used for calibration transfer.The Abet Technologies solar reference cell is a precision instrument for the determination of solar simulator irradiance levels. The sensor is a mono-crystalline silicon solar cell having an area of2x2cm(4cm).The back of the solar cell is attached to the device in such a way that a good heat transfer to the device housing is guaranteed. Below the solar cell a Pt100 RTD temperature sensor is mounted to allow monitoring of device temperature. The device is not shunted allowing the whole IV-curve to be measured. The solar cell is protected by a high quality fused silica window, assuring spectral sensitivity over a 320 -1100 nm range.
-
-
Product
Three Phase High Precision Reference Standard Energy Meter
SY3102
-
Hong Kong Songyang Industrial Ltd.
There are three ports for pulses to output. And its constants can be set automatically or manually. Types of constants can be set also: active power, reactive power, apparent power, voltage, and current.
-
Product
Radio Frequency Probes (Automotive) HF860FAKRAm016G470MCXfS
1038817
-
The Radio Frequency Probes (Automotive) HF860FAKRAm016G470MCXfS is a high-performance coaxial probe designed for precise measurements in automotive applications. It operates efficiently within a temperature range of -45°C to +100°C, making it suitable for a variety of environmental conditions. This model features a significant impedance of 50 ohms and supports continuous current ratings, ensuring reliable performance at frequencies up to 6 GHz. The design emphasizes both reliability and durability, utilizing high-grade materials such as brass for the barrel and beryllium copper for the plunger, enhanced with gold plating to provide superior conductivity and resistance against wear and tear.
-
Product
Reference Thermometers
-
Our Reference Thermapen takes lab accuracy into the field. Each unit is factory calibrated at 5 test points and includes a UKAS accredited calibration certificate with test data. A true "system calibration" is performed matching its Platinum RTD sensor and the built-in electronics so all errors are included in the spec.
-
Product
Single Frequency Lasers
-
A single-frequency laser is a type of laser which operates within a singular resonator mode, achievable when the net gain bandwidth of the laser remains narrower than the frequency spacing of the resonator modes. In cases where the mode spacing isn’t adequately large to support a single resonator mode, single-frequency operation is maintained through the utilization of intracavity filters. This enables the single-frequency laser to possess an exceedingly narrow linewidth, frequently measuring only a few kHz, and an extended coherent length. A clear association exists between the coherence length and the spectral width of the laser.
-
Product
4-Port 9 GHz Analyzer, Frequency Extension Compatible
C4409
-
C4409 Vector Network Analyzer delivers industry-leading dynamic range and sweep speed, with all the features engineers have come to expect included standard in our software. This VNA is frequency extender compatible and is the anchor network analyzer for the CobaltFx frequency extender system.
-
Product
High Frequency RF and Microwave USB Programmable Signal Generators
LMS Series
-
The Lab Brick LMS series of high frequency RF and microwave USB-compatible, synthesized signal generators cover a frequency range from 0.5 MHz - 20 GHz with low noise, fast 100-microsecond switching time, and fine 100 Hz frequency resolution. They require no additional DC supply voltage and offer advanced features such as phase-continuous linear-frequency sweeping, internal/external 10 MHz reference, and optional pulse modulation. GUI software can track and control several connected signal generators, simplifying multiple-signal test setups. Each device stores settings in internal memory, allowing it to power up in a specific instrument state.
-
Product
Qseven® Reference Carrier Board
Q7-BASE
Carrier Board
Qseven is a Computer-on-Module (COM) standard for small sized and highly integrated systems adopted by SGET. The Qseven concept is an off-the-shelf, multi-vendor, Computer-on-Module that integrates all the core components of a common PC and is mounted onto an application specific carrier board. Qseven modules have a standardized form factor of 70 mm x 70 mm or 40 mm x 70 mm and have specified pinouts based on the high-speed MXM connector, regardless of the vendor. The Qseven module provides the functional requirements for an embedded application, which include, but are not limited to, graphics, audio, mass storage, network and multiple USB ports. A single ruggedized 230 pin MXM connector provides the carrier board interface to carry all the I/O signals to and from the Qseven module. This MXM connector is a well-known and proven high-speed signal interface connector that is commonly used for -PCI Express graphics cards in notebooks.
-
Product
Radio Frequency Probes (Industrial) HF860SMCm015G530MCXfS
1039106
-
The Radio Frequency Probes (Industrial) HF860SMCm015G530MCXfS is a highly specialized coaxial probe designed for advanced RF applications. With a generous operational temperature range from -45°C to +100°C, this probe is capable of delivering reliable performance in demanding industrial conditions. Its versatile design includes a pitch of 6.00 mm, making it suitable for a variety of setups, including precision testing and measurements. The probe also supports a continuous current of up to 10 A, with an impedance of 50 ohms, allowing it to function optimally at frequencies up to 5 GHz.
-
Product
Radio Frequency Probes HF860SMBm015G530MCXfS
1039105
-
The Radio Frequency Probes (Industrial) model HF860SMBm015G530MCXfS, designated with order code 1039105, is designed to cater to the intricate demands of industrial RF applications. With a robust coaxial probe design, it operates effectively in temperatures ranging from -45°C to +100°C, ensuring reliability even in harsh environments. This model exhibits a continuous current capacity of up to 10 A, paired with a characteristic impedance of 50 ohms and operational frequency capabilities reaching up to 5 GHz.
-
Product
High Frequency Insulation Tester
HFIT 7.0
-
The MEDTEQ high frequency insulation tester is a popular device for evaluating compliance with IEC 60601-2-2 and the characteristics of insulation at high frequency
-
Product
Standard 4.47 (127.00) - 12.00 (340.00) High Frequency Probe
K-50B-S
High Frequency Probe
Current Rating (Amps): 6Bandwidth @ -1dB (GHz): 4.00Return Loss @ -20dB (GHz): 2.50Nominal Impedance (Ohms): 50Test Center (mil): 600Test Center (mm): 15.24Full Travel (mil): 100Full Travel (mm): 2.54Recommended Travel (mil): 90Recommended Travel (mm): 2.29Overall Length (mil): 1,205Overall Length (mm): 30.61
-
Product
Frequency Converters
-
Ducommun's frequency converter families include waveguide detectors (FAS), passive and active multipliers (FMP and FMA), up and down converters (FUB and FDB), harmonic mixers (FDH), subharmonically pumped up and down converters (FUS and FDS) and phase detectors and single sideband modulators (FPB and FSS). These devices are offered in 7 waveguide bands to cover entire 18 to 110 GHz frequency spectrum. These converters employ high performance GaAs Schottky beamlead diodes and DLT's proprietary circuit configuration to produce superior performance, such as low conversion loss and up to full waveguide instantaneous operation bandwidth.
-
Product
High Frequency Probe HF66KSC016G540MSMPmF
1024461
-
The HF66KSC016G540MSMPmF is a high-performance coaxial probe designed for effective radio frequency (RF) applications, catering specifically to consumer needs. With a versatile operating temperature range of -45°C to +100°C, this probe ensures reliable performance in diverse environments. Its construction features premium materials, including a beryllium copper tip and brass barrel, both plated in gold to provide excellent conductivity and durability. These features guarantee minimal signal loss and optimal signal integrity.
-
Product
Redundant Frequency and Timing Systems
-
A unique feature of our frequency standards and distribution amplifiers is that the two separate parts of the redundant system are identical and can easily be inter-changed, for maintenance purposes. What we mean by this is that that we don't have a "Master" unit and a "Slave" unit. Whatever unit is powered up first becomes the master unit and the other becomes the slave unit.
-
Product
High Frequency Surge Testers
-
The 50KV Digital P J High Frequency Surge Tester is the most powerful tester in a class of its own. No other 50KV Surge Tester can pulse/resonate 60 pulses per second at a risetime of 100 nano seconds.This powerhouse is loaded with the TDS3012B Digital Phosphor colored oscilloscope with a built-in floppy disk drive.
-
Product
5G Channel Sounding, Reference Solution
-
The 5G Channel Sounding, Reference Solution is a combination of hardware, software, and measurement expertise providing the essential components to accelerate 5G sounding research. This reference solution enables researchers and design engineers to use, enhance, or modify the test platform as required to meet specific test application needs including scalable channel count, flexibility to transmit and measure in mmWave frequencies, wide transmit and analysis bandwidths, and real-time data processing.
-
Product
0.1Hz-3.7GHz Frequency Counter
FC-3000
-
Features:*Frequency measuring range: 0.1Hz to 100MHz in A input, 80 MHz to 3.0GHz in C input.*Period,Total and RPM measurement for input A*9 Digit display with 0.01mHz resolution in 1 Sec (By Ext.Reference signal).*RS-232C serial interface function for communication with computer.*High sensitivity Extemal reference input function(>=1.5Vrms).*Peciprocal technique for high resolution at low counting frequencies .*Self check function executed to perform a automatic self diagnosis of various counter function.*Push-scanning for selecting Function and Gate time.*Low-pass filter(100KHz,-3dB)installed for removing noise signsl in low frequency measuring.*AC/DC coupling function(Selectable AC/CD Coupling)*10:1 Input Attenuation(Selectable×1/×10 Attenuator)*Data hold function
-
Product
Slag & Refractory Reference Materials
-
NCS Testing Technology Co., Ltd.
Slag & Refractory Reference Materials by NCS
-
Product
Precision Low Power FGA™ Voltage References
ISL60002
-
The ISL60002 FGA™ voltage references are very high precision analog voltage references fabricated on Renesas' proprietary Floating Gate Analog technology and feature low supply voltage operation at ultra-low 350nA operating current. Additionally, the ISL60002 family features guaranteed initial accuracy as low as ±1.0mV and 20ppm/°C temperature coefficient. The initial accuracy and temperature stability performance of the ISL60002 family, plus the low supply voltage and 350nA power consumption, eliminates the need to compromise thermal stability for reduced power consumption making it an ideal companion to high resolution, low power data conversion systems.
-
Product
Audio Frequency Generator
TM530
-
TM530 Audio Frequency Generator is provided with Pinpoint Fault Locator for pinpointing the low resistance fault and detecting cable route. When detecting, TM530 will inject a signal current of 1kHz audio frequency into the cable, and accordingly a magnetic wave of the corresponding frequency will be generated on the cable. Pinpoint Fault Locator will collect this magnetic signal, thus obtains the information of the cable fault and the route.
-
Product
High Frequency Retrofits and Relocations
-
Our services also include upgrades of existing HF chambers to meet new program requirements, absorber installations, and relocations of chambers from one site to another.
-
Product
Frequency Multipliers
Triplers
-
*No mechanical tuners*fullband operation*planar design*zero Bias
-
Product
Radio Frequency Probe TC-P 201 008 RJ 45
1021620
-
The TC-P 201 008 RJ 45 Radio Frequency Probes are designed for high-performance applications, providing reliable connectivity and precision in data transmission. With an optimal continuous current rating of 1.50 A, these probes ensure that electrical signals are transmitted efficiently while maintaining low contact resistance, measured at only 20 mOhm. This combination makes the TC-P 201 008 ideal for various consumer electronics applications, where both performance and reliability are paramount.
-
Product
Radio Frequency Probes (Industrial) HF890MMPXf0112G900SMPmP
1042145
-
The Radio Frequency Probes (Industrial) HF890MMPXf0112G900SMPmP, designated by order code 1042145, is designed for a wide range of high-frequency applications, making it an essential tool for professionals in various industrial sectors. This coaxial probe features a precise pitch of 6.50 mm (256 mil), and operates efficiently within a temperature range of -45°C to +100°C, ensuring reliability under various environmental conditions. The probe is engineered to handle a continuous current of up to 10 A and supports a frequency range of up to 12 GHz, making it versatile for different applications where high performance is critical.
-
Product
Radio Frequency Probes (Automotive) HF77SMKMINIFAKRAm0212G1080MSMPmF
1139613
-
The Radio Frequency Probes (Automotive) HF77SMKMINIFAKRAm0212G1080MSMPmF is engineered for high precision and performance in automotive applications. This coaxial probe features a compact design with a pitch of 12.0 mm, making it ideal for integrating into tight spaces within automotive electronics. With an impedance of 50 ohms and a maximum frequency capability of 12 GHz, it ensures reliable signal integrity for various RF testing purposes.
