Filter Results By:
Products
Applications
Manufacturers
Spectrometers
Measure the wavelengths and intensity of light.
See Also: FTIR Spectrometers, THz Spectrometers, HPGe, Spectrograph
-
product
Dispersive X-ray Fluorescence Spectrometer
SPECTRO MIDEX
SPECTRO Analytical Instruments GmbH
The SPECTRO MIDEX is known to be an all-round talent for the fast, non-destructive analysis of small spots and the rapid mapping of large surfaces (up 233x160 mm, 9.2x6.3’’) in research and development as well is in compliance screening applications as many elemental analysis tasks in industry, research and the sciences require a non-destructive measuring system that is extremely sensitive and offers a small measuring spot.
-
product
Miniature High Throughput Spectrometer
VS20-VIS
HORIBA designs and manufactures miniature high-throughput OEM spectrometers from 190 nm to 1700 nm for various applications. Thanks to a low stray light aberrations corrected concave holographic grating, the VS20-SYS platform offers in a 1.68 x 1.87 x 2 inches footprint a very reliable and robust spectrometer.VS20 OEM spectrometers can be fully customized in sensors, entrance, slit size, electronics board, interface, etc.
-
product
Mineral Spectrometer
TerraSpec 4 Hi-Res
Analytical Spectral Devices, Inc.
Recognized as the de facto technology for mineralogical analysis, the rugged portable TerraSpec mineral spectrometers are trusted by top geologists for performing fast, precise geologic exploration. Now the upgraded TerraSpec 4 Hi-Res mineral analyzer brings new levels of efficacy to mineral exploration technology. This state-of-the-art mineral spectrometer offers enhanced performance in the SWIR 1 and 2 regions and a 6 nm resolution to help you determine the viability of mineral exploration targets faster and more precisely than ever before. These enhancements provide you with the ability to capture accurate spectral data more quickly, especially for samples with darker mineral features.
-
product
Spectrometers
As a leader in this field, BioLogic has over 30 years of experience of developing equipment designed to give researchers a cutting-edge. Originally dedicated to rapid kinetics measurements, BioLogic now also develops, integrates and manufactures a wide range of instrumentation for steady-state spectroscopy including spectropolarimeters.
-
-
product
hyperspectral imaging sensor
Hyper-Cam
The Hyper-Cam is a lightweight and compact hyperspectral imaging sensor which uses Fourier Transform Infrared (FT-IR) technology. This advanced high-performance spectrometer allows to detect and identify substances either gases or solids from a distance of up to 5 kilometers. It provides real-time chemical imaging as well as unparalleled spatial and spectral information about the IR targets under measurement.
-
product
Spectrometers
Compact spectrometers with versatile performance covering UV, Visible and NIR wavelengths are available for multiple applications in Research, OEM and Process solutions.
-
product
Handheld Portable Spectrometers
The UPRtek line of precision portable spectrometers are reliable, lightweight and easy-to-use. These spectral illuminance (LUX) meters or spectral light meters from Gamma Scientific are designed for fast and accurate light measurement. This product collection includes ultra-compact, basic and advanced models. With both battery-operated and line-power modes, these portable spectrometers are particularly well suited for field and laboratory use.
-
product
Flexible High-Performance Spectrometer
MCS Series
MCS UV-NIR has remarkable performance in the 190 - 1015 nm spectral range with great flexibility thanks to different optical entrance and housing designs and detector options for exceptional signal/noise or highest sensitivity.
-
product
Rugged, High Performance RDE Elemental Analyzer
SpectrOil M Series
The latest SpectrOil M series is the eighth generation RDE Optical Emission Spectrometer for elemental analysis in oil and fuel. It is a compact, rugged, transportable and easy to use optical spectrometer that meets military shock and vibration and environmental test standards. The analyzer can be placed in the toughest remote locations around the globe, while still maintaining the laboratory grade accuracy and sensitivity needed for aerospace engine test requirements.
-
product
Frequency-Resolved Optical Gating Pulse Analyzer
IQFROG
The IQFROG measures pulse intensity and phase in both spectral and temporal domains, yielding a complete pulse characterization. With its long delay arm and high resolution spectrometer, it measures chirped pulses up to 50 ps wide, or up to 10 ps wide if the pulse is transform limited. The IQFROG is available in 1.0 and 1.5 micron wavelengths.
-
product
Electron Microscope Analyzer
QUANTAX WDS
The QUANTAX WDS (WDX) for SEM consists of the XSense wavelength dispersive spectrometer yielding the best resolution among all parallel-beam WDS systems.
-
product
Spectrometer - OSA
HighFinesse optical spectrometers LSA and HDSA are designed to analyse the multi-line or broadband spectrum of (un-)known light sources like cw and pulsed lasers, gas discharge lamps, super luminescence diodes, semiconductor laser diodes and LEDs. They are suitable to analyze the spectrum of telecom signals, resolve Fabry-Perot modes of a gain chip, and produce a spectral measurement of gas absorption.
-
product
Spectrometer
LSCM
This device performs high-speed measurement and sorting of LED electrical and optical characteristics while synched with control signals from the LED production line inspection and sorting system. The LSCM then provides that pass/fail information to the system. The LSCM is equipped with the function to test both electrical and optical characteristics by applied voltage and current to the LED. This test device was designed to integrate test functions required by the inspection and sorting system into one compact body.
-
product
Bench-Top Macroscopic Raman Spectrometer
Modular Raman Microscope
HORIBA’s modular Raman spectrometers allow the user to have a flexible Raman system to handle high performance spectroscopy at a price to fit most budgets. The modular microscope can also be used with a range of sampling options, including remote probes. A Raman spectrum recorded with a fiber-coupled Raman microscope of acetaminophen is shown below.
-
product
ICP OES spectrometer (ICP AES)
SPECTRO Analytical Instruments GmbH
ICP OES spectrometer (ICP AES) for the rapid analysis of elements in a variety of matrices including aqueous, semi-conductor, petrochemical, soil, metallurgical and slurries
-
product
Grating Spectrometers
We offer a range of OEM instruments from miniature fiber spectrometers to research-grade grating spectrometer systems with TE or LN2-cooled CCD and InGaAs detectors.HORIBA Scientific provides miniature CCD and PDA USB spectrometers as well as 70 to 1250 mm focal length imaging spectrometers with single and multichannel detectors.If you are not a future OEM and are looking for larger, research-grade spectroscopy systems (focal lengths of 1/4 meter spectrometers and longer), please visit our Custom Spectroscopy Division
-
product
UV Man Spectrometer
UV Raman (with laser wavelengths below 400nm) can be used to probe specific sample properties, and benefit from experiment properties different from typical visible Raman measurements – for example, greatly increased Raman scattering efficiency, modified laser penetration within the sample, and resonance coupling to different chemical moeities. However, UV analyses come with a number of technical challenges, that require considered instrument design to allow UV Raman to be a truly useful tool for the researcher.
-
product
Inductively Coupled Plasma Spectroscopy (ICP-OES/MS), ICP Analysis Services
ICP-OES measures the light emitted at element-specific characteristic wavelengths from thermally excited analyte ions . This light emitted is separated and measured in a spectrometer, yielding an intensity measurement that can be converted to an elemental concentration by comparison with calibration standards. ICP-MS (ICP-Mass Spec) measures the masses of the element ions generated by the high temperature argon plasma. The ions created in the plasma are separated by their mass to charge ratios, enabling the identifcation and quantitation of unknown materials. ICP-MS offers extremely high sensitivity (i.e. low detection limits) for a wide range of elements
-
product
Photoluminescence Spectrometer
FLS1000
The FLS1000 sets the standard in both steady state and time-resolved photoluminescence spectroscopy for both fundamental research and routine laboratory applications. The system is a modular fluorescence and phosphorescence spectrometer for measuring spectra from the ultraviolet to the mid-infrared spectral range (up to 5,500 nm), and lifetimes spanning from picoseconds to seconds. All of this can be achieved through various upgrade routes, either at the time of order or in the future. Whether you are studying photophysics, photochemistry, biophysics, biochemistry, material or life sciences, the FLS1000 will enable you to reliably and accurately measure luminescence spectra and kinetics using state-of-the-art sources, detectors, acquisition techniques, quality optics and precision mechanics. The large sample chamber will house practically any type of sample accessory.
-
product
Polychrometer (multichannel spectrometer)
It is a spectrometer that reduces the aberration of the optical system to the utmost limit because it measures effectively using multichannel detectors such as CCD, CMOS, InGaAs etc. Since the spatial resolution is high on the whole surface of the light receiving surface of the detector, it can be used for the following applications.
-
product
Photoelectric Direct Reading Spectrometer
TY-9610
Wuxi Jinyibo Instrument Technology Co., Ltd.
1, Optical SystemStructure: Pa type - RungeRaster: Radius of curvature: 750mmIncident slit width: 20 μ mExit slit: high-precision photolithography of the entire slit, according to different elements set up 30u-75u slit width.Detector: Photomultiplier tube ( PMT ) detector2, all digital excitation light source1. Fully digital intelligent composite light source DDD technology, which can automatically adjust the excitation parameters of light source according to the excitation characteristics of different materials, and truly realize full digital control. 2. Using the all-digital control mode, high-energy pre-combustion technology ( HEPS ), ultra-stable energy release stimulates the sample in an argon atmosphere. 3. The application of all-digital light source improves the measurement accuracy and similarity of the sample, improves the sample excitation speed, improves the spark stability, and makes the sample have better reproducibility. The maximum discharge current reaches 400A .
-
product
Dual-Channel Spectrometers
Sometimes a single-channel spectrometer is not enough, for example, when you want higher resolution or perform two redundant measurements simultaneously. The AvaSpec dual-channel spectrometers are designed specifically for this purpose. Each spectrometer can be configured independently. The dual-channel can be equipped with two AvaSpec-ULS2048CL or two AvaSpec-ULS4096CL spectrometers.
-
product
Transient Absorption
Our Transient absorption spectrometers use a powerful set of techniques used to identify electronic and structural characteristics of short-lived excited states (transient states) of photochemically/photophysically relevant molecules.
-
product
Miniature Spectrometers
Ultra compact fiber-coupled instruments for portable applications in the 180 - 1700 nm range.
-
product
Laboratory Spectrometers
M Series
Current generation M4000 spectrometers truly represent evolved technology. They represent over two decades of product development, incorporating many of the features that allow our high performance dedicated analyzers to achieve low ppb detection levels in complex gas matrices.
-
product
NanoSpectralyzer
NS2
NS2 is the world's only three-in-one spectrometer for carbon nanotubes. The NS2 provides all of model NS1's state-of-the-art capabilities for analyzing SWCNT samples through near-IR fluorescence and absorption. In addition, the NS2 captures Raman spectra of all CNTs, whether single-walled, multi-walled aggregated, large diameter, or chemically altered. All spectra are automatically measured with a single placement of the sample cuvette. Sophisticated software then performs integrated data analysis to characterize the CNT sample.
-
product
Fluorescence Spectrometers
PicoQuant offers several fluorescence spectrometers that range from compact table-top spectrometers for teaching or daily routine work to modular high-end spectrometers with exact timing down to a few picoseconds. Samples can be liquids in standard cuvettes, solid samples or even semiconductor wafers for in-line quality control.
-
product
Benchtop NMR System
Spinsolve
The Spinsolve Autosampler uses a rotating carousel and mechanical arm to introduce and remove samples from the spectrometer. It enables up 20 separate samples to be measured in any order and can be fitted to all Spinsolve models. The software is very easy and intuitive to operate and requires very little training to use. It useful for customers who often have a series of samples to run on their benchtop NMR and want to save the hassle of having to keep coming back to exchange samples. Another benefit is the ability to increase utilization by setting up a queue of experiments to run on their Spinsolve overnight.
-
product
Femtosecond Extended Spectroscopic Systems
Harpia
Capabilities of HARPIA‑TA spectrometer can be further expanded by HARPIA‑TF and HARPIA‑TB extensions. Fundamentally, the all-integrated HARPIA system can be viewed as a miniaturized lab facilitating all the most popular time-resolved spectroscopy experiments in a single package. The all-inclusive HARPIA system can provide an extensive comprehension of the intricate photophysical and photochemical properties of the investigated samples.
