Product

Programmers & Debuggers

-

MikroElektronika D.O.O.

MikroElektronika D.O.O.

CODEGRIP & mikroProg series

Product

Stand-Alone Programmer and Hardware Debug Interface

Cyclone MAX

-

P&E Microcomputer Systems

Cyclone MAX - P&E Microcomputer Systems

Cyclone MAX is an extremely flexible tool designed for in-circuit flash programming, debugging, and testing of Freescale ColdFire V2/V3/V4, Power Architecture 5xx/8xx, Power Architecture 55xx/56xx (Nexus), and ARM (MAC7xxx) microcontrollers.

Product

Embedded Local Oscillator Capability

S93084B

-

Keysight Technologies

S93084B - Keysight Technologies

The S93084B tunes the network analyzer’s receivers to the output frequency of the converter under test without having to access internal LOs or a common reference signals. For converters with embedded LOs, this enables measurements of match-corrected conversion loss/gain and absolute group delay (requires S93082B and S93083B), gain compression versus frequency (requires S93086B), intermodulation distortion (requires S93087B), and noise figure (requires S93029B).

Product

ISP Programmer Superpro Is01

-

Xeltek

Xeltek

Features:Until now,Support IC manufacturer, pcs devices and keeps growing.1)High speed thanks to the flexible hardware engine. Programming speed adjustable for complicated application environments brought by user target board, length of ISP cable etc.2)Stand-alone and PC-Hosted (USB2.0 High Speed) dual mode;3)Supports ISP programming of devices with I2C, SPI, UART, BDM, MON, MW, JTAG, CAN, ICC, RS232 and any other serial port.4)ATE interface;5)Over-current and ESD protection to protect your equipment;6)DLL and API for easy integration into customers’ system.Hardware Specifications:1) ISP cable integrates I2C, SPI, UART, BDM, MON, MW, JTAG, CAN, ICC, RS232 interfaces。2) VDD (0-5.5V /0.5A) and Vpp (0-15V / 0.2A) lines provided to power the target board and the target devices.3) Cable driver circuit supports target devices of voltage level 1.5-5V and is ESD protected.4) USB 2.0 (high speed) interface for PC hosted mode and management of project files on SD card.5) A 20 Characters x 4 lines LCD and a 6-key keypad are built with it for stand-alone operation. In stand-alone mode project files are stored on the SD card (up to 16GB). The number of the project files is limited only by the capacity of the SD card.6) ATE interface is built for easy external hardware control. 6 lines SEL0-SEL5 are for project selection (maximum 64 files); 2 command lines START and STOP; 3 STATUS lines PASS, FAIL and BUSY. All signals are optical-isolated.7) A universal AC adaptor of DC12V/2A is included for power supply.8)WINDOWS XP/Vista/Win7/Win8/Win10 32/64bit compatibility.Software Specifications:1) Supports almost all devices with ISP interface.2) Supports Jam and Staple files from ACTEL and ALTERA; Direct C files from ACTEL.3) Programming speed selectable (High, Normal and Low) for complicated applications such as different cable lengths, different target load characters.4) Dynamic buffer function. Application examples include device S/N, MAC address, frequency or transducer calibration etc.5) File format on SD: FAT16, FAT32.6) Functions for IP protection: Project security, SD security, batch control, administration management etc. 7) API and DLL provided for easy integration into customers’ system like ICT and ATE.8) Software provides the features for multiple units to work concurrently controlled by USB HUB.Applications:1)R&D application like in-circuit test and debug.2)Volume production. Devices may be programmed after the board is fully assembled. One example is the serial number writing to an on-board serial device.3)Field application. Comes with portability, stand-alone mode and mobile data storage media (SD card), it is suitable for field test, debug and data acquisition.4)Third application modules. Friend s/w interface (DLL and Virtual Com communication command set) and h/w interface ( ATE and USB) are provided and make it very easy for customers to integrate ISP01 as a functional module into their systems. One example is the ICT equipment. With this integration user can finish in-circuit test and in-circuit programming in one step.

Product

Programmable Resistor Instrumentation

-

Marvin Test Solutions, Inc.

Marvin Test Solutions, Inc.

Power Interface, Prototype Cards and Programmable Resistor Cards for the PXI and GTXI platforms.

Product

Dielectric Resonator Oscillators

-

ERAVANT

ERAVANT

Dielectric resonator oscillators (DRO) are free running oscillators that utilize state-of-the-art planar circuits, three-terminal devices and dielectric resonator technology to generate high-quality microwave signals with excellent frequency stability. In addition, these oscillators are equipped with an internal voltage regulator that further improves the frequency stability by isolating the external bias pushing and modulation. In general, these oscillators are fixed. However, a small mechanical or electrical tuning range can be achieved by use of a self-locking screw or an integrated Varactor diode. The standard offering covers the frequency range of 2 to 40 GHz. While standard models are equipped with female SMA and K connectors at the RF port, other RF interface options are also available.

Product

Wide Range High Voltage Programmable DC Power Supply

N3600 Series

-

Next Generation Instrumental (Shanghai) T&C Tech. Co., Ltd.

N3600 Series - Next Generation Instrumental (Shanghai) T&C Tech. Co., Ltd.

N3600 series is developed based on NGI's years of experience in testing for battery fluctuation simulation test, battery charger, high voltage diode, electrolytic capacitor, electromechanical control, ATE test system, etc. It is a high-voltage wide-range programmable DC power supply. According to different test environments in the fields of lab test, system integration test, and mass production line, NGI has made a number of optimization designs based on the international advanced technology. N3600 series is a market leader in similar products in terms of reliability, maintainability and safety.

Product

Programmable Delay Line Instrument

XT-100-OEM

-

Colby Instruments, Inc.

XT-100-OEM - Colby Instruments, Inc.

With the XT-100-OEM, all the capabilities and precision of the XT-100’s trombone technology can be built right into your own system. This product is intended primarily for OEM applications so you have a streamlined solution for precision phase shift or programmable delay.

Product

Programmable Delay Line Instrument

The XR Series

-

Colby Instruments, Inc.

The XR Series - Colby Instruments, Inc.

A selection of common step sizes that gives you the broadest signal delay range among all our products

Product

Programmable AC Laboratory Power Supplies, Motor-controlled

-

ET System Electronic GmbH

ET System Electronic GmbH

Programmable AC Laboratory Power Supplies, Motor-controlled

Product

Programmable RF Multi-Port Test

-

BCO, Inc.

BCO, Inc.

A programmable multi-port switch between your RF device under test and a Vector Network Analyzer significantly speeds up testing.

Product

Programmable Power Supplies

Genesys™

-

TDK-Lambda Corp.

Genesys™ - TDK-Lambda Corp.

The Genesys™ series sets the standard for flexible, reliable, AC-DC power systems in OEM, Industrial and Laboratory applications with the highest power density in 1U, 2U or 3U sizes at a competitive price.

Product

3 GHz, 4 Channel Programmable Delay Line

QPADL3

-

GigaBaudics Co.

QPADL3 - GigaBaudics Co.

The QPADL3 is a programmable delay line instrument with 4 independent channels designed for adjusting the time delay or phase of radio, microwave or even digital signals with bandwidths from DC to 3 GHz.

Product

Isolated Programmable Multifunction Counter Board

APCI-1710-10K20

-

TEAM SOLUTIONS, INC.

APCI-1710-10K20 - TEAM SOLUTIONS, INC.

Wide application possibilities through free combination4 modules with numerous functions quickly and easily programmableEach of the 4 modules is programmed with a function. The 4 modules can either be programmed with the same function or freely be combined with 4 different functions.

Product

Programmable Data Logger

HD32MT.1

-

Senseca

HD32MT.1 - Senseca

Programmable datalogger able to capture and store the values measured by a series of sensors connected to its inputs. 8 analoge input, 8 digitale input, 2 puls input, potential free contacts, alarming. Programmable through software. RS485, RS232.

Product

High-accuracy Multi-channel Programmable DC Power Supply

N39400 Series

-

Next Generation Instrumental (Shanghai) T&C Tech. Co., Ltd.

N39400 Series - Next Generation Instrumental (Shanghai) T&C Tech. Co., Ltd.

N39400 series is a high-accuracy & multi-channel programmable DC power supply with standard 19-inch 2U design, available for cabinet installation. Single N39400 supports Max. 4 channels output, with channels isolated. Both local operation on front panel and remote control on a computer are supported. N39400 can be widely used in lab test, system integration test, production aging line, etc.

Product

Programmable DC Power Source

D Series

-

PRODIGIT Electronics Co, Ltd.

D Series - PRODIGIT Electronics Co, Ltd.

The programmable DC power supply is equipped with active power factor correction to improve circuit efficiency. The full range input voltage makes it suitable for most industries and countries without requiring a voltage conversion switch.

Product

Powerful In-Circuit Production Flash Programmer

CYCLONE FX

-

P&E Microcomputer Systems

CYCLONE FX - P&E Microcomputer Systems

P&E Microcomputer Systems' Cyclone FX programmer is is a powerful in-circuit, stand-alone programmer that supports a wide range of ARM Cortex and NXP® processor families. It's a versatile tool that offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface. Programming may be launched by a single button press without a PC or automatically from a PC via the automated control SDK. The Cyclone may also be used as a debug probe during development.