Product

Fiber Stiffness Tester

DRK023A

-

Shandong Drick Instruments Co., Ltd.

DRK023A - Shandong Drick Instruments Co., Ltd.

Used to determine the bending properties of various fibers.

Product

- 10Base-T to Multimode Fiber Optic Transceiver

Model 373

-

Telebyte, Inc.

Model 373 - Telebyte, Inc.

FEATURES: Extend Lan's over 1 mile; Full Duplex Plug and Play - no software; Uses industry standard fiber optic cables; Impervious to lightning and surges; Total electrical isolation; 10Base FL compatible. Now you can break the distance barrier of Ethernet based Local Area Networks and achieve total system safety from electrical interference and surges.

Product

Optical Fiber Testers and Tools

-

Shandong Senter Electronic Co., Ltd

Shandong Senter Electronic Co., Ltd

with the aid of high-end technology and equipment, SENTER Electronic manufactures and trades high-tech optical fiber testers and tools with low price. and we are known as one of the leading such manufacturers and suppliers in China for our quality products and good service. Welcome to buy the optical fiber testers and tools with our factory.

Product

MEMS Fiber Optical Switch at Single Mode 1315nm Type-A with LC/PC Connector

SUN-MS-1x8

-

Guilin GLsun Science and Tech Group Co., LTD

SUN-MS-1x8 - Guilin GLsun Science and Tech Group Co., LTD

Fiber Configurations 1x8 MEMS Fiber Type SM, 9/125 umTest Wavelength 1310/1550 nm Operating Voltage 2.5VSwitch Type Non-latching Fiber Length 0.5m±5cmConnector TTL/UART Tube Type 900 umOperating Temperature -5°C~ +70°C Storge Temperature -40°C ~ +85°C

Product

Fiber Monitoring System for Optical Networks

-

M2 Optics, Inc.

M2 Optics, Inc.

Detecting serious physical network infrastructure issues like accidental fiber cuts, intrusion attempts, and malicious tampering has never been easier than utilizing this Fiber Monitoring System available from M2 Optics. The first solution approach in the industry that was designed to minimize monitoring costs on a per-fiber basis, all the hardware and software are integrated into a single low-profile chassis for fast deployment to cover your critical links.

Product

Polarization Maintaining Fiber Components

-

OZ Optics

OZ Optics

OZ Optics offers a broad range of polarization maintaining components, patchcords, and connectors designed to resolve polarization problems, which are becoming increasingly important in today's higher speed and more complex mesh optical networks. By maintaining the polarization of the signal at its source, our polarization maintaining components minimize polarization mode dispersion and eliminate the effect of polarization dependent loss thereby increasing the quality of the signal that is transmitted throughout the network.

Product

Fiber Optic Test System

OPTOWERE-S100 (Fiber Optic Test System)

-

Notice

OPTOWERE-S100 (Fiber Optic Test System) - Notice

The frame of FOTS system consists of the Main control part and the Slot mounting part. The Main control part is in charge of control and interface of the system and the Slot mounting part can hold up to maximum 8 slots, which are modularized according to each function and come out in five kinds. This integrated test system is designed to help manage the test and measurement related to optical communication and component. And the modular architecture of FOTS allows for customized configuration so that the slot of LD Driver, 2 channel VOA, 1 X 4 switch, WDM EDFA and C + L – Band ASE Source can be chosen according to user’s necessities. Main control part and each function module are run by effective and multi-functioned system control program in the base of high speed remote interface, GUI display and the discriminative high speed driving of module and system. This system can provide variety manufacturing and laboratory applications such as general quality test and reliability test of optical component and optical signal transmission test through efficient linkage with other system.

Product

Mini Fiber Optic Receiver

MX555 series

-

Maxcom Inc.

MX555 series - Maxcom Inc.

The Maxcom MX555 series optical receivers are versatile, low-cost and compact optical receivers are versatile, low-cost and compact optical receivers for use in HFC fiber applications.

Product

Fiber Racks & Cabinets

-

Wuhan Sunma Technology Co., Ltd.

Wuhan Sunma Technology Co., Ltd.

Optical Distribution Frame (ODF) is integrated components in any fiber management system to handle termination and cross-connection of cables. Pre-terminated ODFs with cables are pre-installed with connectors and cable for quick and easy installation. Units with pre-terminated cables offer advantages such as faster installation, resulting in shorter time to revenue as well as guaranteed quality and performance. SunmaFiber offer optical distribution frame in different size, such as 1U 12 ports, 1U 24 ports, 2U 36ports, 3U 48 ports, 4U 72 ports. Several cable options are available.

Product

Fiber Optic Instruments

-

Tempo Communications, Inc.

Tempo Communications, Inc.

Tempo Communications provides a comprehensive line of fiber optic testing solutions that enable tech... nicians to install, commission, and document P2P and FTTx installations. Accurate troubleshooting is made effortless with the 930XC family of OTDR’s, optical power meters, visual fault locators, and the fiber identifier, while installing fiber has never been easier with the fusion splicer, fiber cleaver, splice on connectors, and fiber hand tools. Elevate your fiber game with Tempo!Show less

Product

HDMI Extender via One SC Multimode Fiber Optic Cable to 3,280 feet

ST-FOHD-SC50

-

Network Technologies Inc

ST-FOHD-SC50 - Network Technologies Inc

The XTENDEX® HDMI Extender via Fiber Optic Cable locates an HDMI display up to 3,280 feet (1,000 meters) away from a video source using a single SC multimode fiber optic strand. Each extender consists of a transmitter that connects to a video source and a receiver that connects to a display.

Product

Optical Fiber Identifier

TW3306

-

Techwin(China) Industry Co., Ltd

TW3306 - Techwin(China) Industry Co., Ltd

Optical Fiber Identifier TW3306Ais an essential installation and maintenance instrument. By inserting the fiber into its adapter head, it can identify SM optical fibers without any damage by detecting the optical signals being transmitted through them so as to avoid the opening of the fiber at the splice point for identification and thus avoids the interruption of the service.In the presence of traffic, the intermittently audible tone is activated.

Product

aeroPULSE Ultrafast Fiber Lasers

-

NKT Photonics A/S

NKT Photonics A/S

aeroPULSE is our ultrafast fiber laser platform. Robust, industrial, and available in both pico- and femtosecond flavors.

Product

Fiber Identifier & VFL

-

Tempo Communications, Inc.

Tempo Communications, Inc.

Are designed to non-invasively identify continuous-wave signals in fiber optic cables. They are low cost, hand-held tools.

Product

Fiber TAPs

-

Profitap B.V.

Profitap B.V.

Profitap fiber TAPs provide secure in-line network access for the monitoring of 1–400 Gbps fiber networks. By splitting the light flowing on the network link, fiber TAPs deliver an exact copy of the data for real-time monitoring and analysis, without disrupting the network. Passive fiber optic TAPs require no power, and therefore introduce no point of failure when deployed in a network.

Product

Fiber Optic Loopback MTP

-

Anfkom International Co.,Limited

Anfkom International Co.,Limited

Anfkom can provide single mode and multimode MTP MPO fiber optic loopbacks. MTP/APC Singlemode loopbacks, and MTP/UPC Multimode loopbacks using high quality US Conec MTP connectors for the highest quality polish and lowest insertion loss. All fiber modes including 9/125, 50/125, 62.5/125. Our MPO MTP loopbacks in standard configurations such as for QSFP modules for a QSFP MTP loopback tester. Custom MPO MTP loopbacks are also available for any configuration. Call or e-mail us about custom MTP MPO loopbacks- we can make any custom configuration you need for your custom MTP loopback needs.