Product

ProSys-5101, Industrial Embedded Computing Platform

053-221

-

ELMA Electronic, Inc.

053-221 - ELMA Electronic, Inc.

ProSys-5101 is a compact application ready platform with a low power CPU for various industrial uses, as process control, security, digital signage, IoT edge points and more. The large amount of I/Os enables connectivity for most applications.

Product

SC5-FESTIVAL 3U cPCI Serial Intel® 7th Gen XEON® E3 SBC

SC5-FESTIVAL

-

ELMA Electronic, Inc.

SC5-FESTIVAL - ELMA Electronic, Inc.

The SC5-FESTIVAL is a feature-rich high performance 4HP/3U CompactPCI® Serial CPU board with an Intel® Xeon® E3 familiy mobile workstation processor. Also available with a 7th Generation Intel® Core™ Kaby Lake processor.

Product

ARM LPC3250 Board

MS 1509

-

Meltronics Systemtech

MS 1509 - Meltronics Systemtech

- 32 Bit ARM LPC3250 Processor (256KB SRAM)- 133MHz External Bus Speed and 266 MHz internal CPU Speed- 32 Bit, 33MHz CPCI Bus, 6U Form Factor- External memory ( Flash – 2 MB, RAM - 512 KB, DPRAM – 128KB)- 10/100 MBPS Ethernet Interface- USB 2.0 Host/Device Interface- 2 RS232 Serial Ports, 4 RS422 Serial Ports- M Module Interface- 6U board compatible with CPCI & PXI backplanes- High Speed Logic Device- Hot Swap Feature- Front Panel and Rear IO Interface- External Bus through Rear IO- Reception of 3Kbytes within 2ms through Ethernet- Board Dimension is 160mm x 233.35mm- Power Requirements: +3.3V, +5V and +/-12V- Board Dimension is 160mm x 233.35mm- Board has Rear IO interface- Ethernet, JTAG, RS232, USB connectors at front side- BSPs and Driver software for Windows and Linux OS

Product

nanoSynth® Integrated 6 GHz SMT Synthesizer

Nano Series

-

SignalCore, Inc.

Nano Series - SignalCore, Inc.

The SC800 nanoSynth® is a fully integrated broadband CW signal synthesizer that combines multiple PLL, DDS, and frequency dividers into a rugged and miniature 2”x1” surface mountable package. The output frequency range is 25 MHz to 6 GHz with average output power of +10 dBm. Tuning at 1 Hz resolution, the multiple PLL architecture eliminates close-in phase spurs that are associated with fractional-N PLLs. To simplify user communication with the device, an onboard microprocessor performs all necessary computations to control and set the output frequency, reducing the number and complexity of instruction registers.

Product

Renesas Synergy™ Microcontrollers

S3 Series - High Efficiency

-

Renesas Electronics Corp.

S3 Series - High Efficiency - Renesas Electronics Corp.

Stretch application efficiency with optimized power for performance in the S3 Series. Handle data-intensive operations with minimal CPU clock cycles and a built-in Floating -Point Unit for data security with features such as Advanced Encryption Standard (AES), True Random Number Generator (TRNG), and Memory Protection Unit (MPU).

Product

Fibre Channel Simulyzer™ Products

-

Avionics Interface Technologies

Avionics Interface Technologies

Our Fibre Channel products support most popular avionics Upper Layer protocols including FC-AE-ASM, FC-AE-1553, FC-AE-RDMA and FC-AE-AV. All AIT Fibre Channel modules utilize multiple processors with large onboard RAM. An onboard processor runs the driver software, minimizing host CPU interaction, enabling autonomous operation with minimal interaction during time-critical applications.The Fibre Channel products use our Simulyzer™ technology that enables the hardware to simultaneously perform Fibre Channel data generation and Fibre Channel monitoring on the same physical board. The Fibre Channel test products include full-function device driver software for the most popular operating systems, an application interface supporting development environments, as well as a comprehensive set of source code examples.

Product

Vision System With LGA1151 Socket 7th/6th Gen Intel® Core™ I7/i5/i3 & Celeron® Processor, Intel® H110, 4 PoE, 4 USB 3.0, And Real-time Vision I/O

IPS960-511-PoE

-

Axiomtek Co., Ltd.

IPS960-511-PoE - Axiomtek Co., Ltd.

Featuring a multi-core CPU, IP40-rated rugged design, camera communication interfaces, real-time vision-specific I/O with microsecond-scale and LED lighting control, the IPS960-511-PoE  provides an all-in-one solution that addresses the needs across various machine vision platforms and automatic inspection cases. The IPS960-511-PoE is powered by the LGA1151 socket the 7th & 6th generation Intel® Core™ (codename: Kaby Lake/Skylake) and Celeron® processors (up to 65W) with the Intel® H110 chipset. The intelligent vision system comes with dual DDR4-2133/2400 un-buffered SO-DIMM sockets for up to 32GB of system memory as well as supports rich camera interfaces for connecting industrial cameras, including four IEEE802.3at PoE LAN ports and four USB 3.0 ports. Its vision I/O integrates a full range of isolated I/O interfaces and real-time controls essential to machine vision applications, including trigger input, LED lighting controller, camera trigger, as well as an encoder input for conveyor tracking. The IPS960-511-PoE also supports lighting dimming control to identify object characteristics for different inspection. Two easy-swappable 2.5" HDDs are available for extensive storage needs.

Product

Timing Controller

MS 2009

-

Meltronics Systemtech

MS 2009 - Meltronics Systemtech

MS5128 Timing Controller has programmable logic generation, Input Output Signals Interface, Timings, macro-cells, Pins, internal timing delay and Signal Levels for airborne microprocessor boards.

Product

Controllers

-

Advantech Co. Ltd.

Advantech Co. Ltd.

The ADAM-5560CE/KW Micro PAC is useful for up to 224 I/O point applications. It features an Intel Atom D510 CPU along with control specific features such as watchdog timer, battery backup RAM and deterministic I/O. The ADAM-5560KW also supports 5 standard IEC 61131-3 programming languages in Microsoft Windows CE 5.0. With the optional HMI Software and built-in VGA port, users no longer need to use additional SCADA PC’s in their applications.

Product

CPCI Advanced Compute And IO Board

-

Meltronics Systemtech

Meltronics Systemtech

Advanced Compute & IO Board is high end Microprocessor based Mixed Input & output Board. It is suitable for high speed Data Acquisition, Simulation, ATE applications. This board have digital I/O signals, analog I/O signals, USB, RS232, Ethernet interface and external bus interface. Board is well suitable for special type data acquisition & processing application. Board has high end FPGA which is used for automatic (Programmable) data acquisition and very useful high speed data acquisition. Board is based on CPCI architecture and can be used with CPCI or PXI backplane.

Product

Kestrel /SX Co-Processor

0149-SX

-

Strobe Data Inc.

0149-SX - Strobe Data Inc.

Same speed Windows/NT Kestrel Co-Processor for equivalent system throughput, or more. Occupies one PCI slot. A writable control store, FPGA implementation of the HP1000 architecture with 4 MBytes of tightly coupled, zero wait-state memory. Includes compatible hardware floating point. On-card x86 microprocessor rapidly processes "virtual" I/O instructions. PCI bus speeds increase disk throughput by at least a factor of ten. HP1000 Bus support logic for non-emulated devices is provided on-board with connector to wide bandwidth fibrechannel adapter. Operates only under Windows/NT. WNT Support license included.

Product

Frequency Counters

-

C&C Instruments Co.

C&C Instruments Co.

-Frequency Range : 0.2Hz to 5.5GHz Built-in CMOS Gate Array Fast, High-Resolution, 10 Digits Green LED Display Microprocessor Controlled Reciprocal Technique for Low Frequency Resolution Self Diagnosis Routine Total, RPM Function, Period Low Pass Filter(100KHz, -3dB) Rs-232c Interface(Option)

Product

Luxmeter

Digilux 9500

-

Instrument Systems Optische Messtechnik GmbH

Digilux 9500 - Instrument Systems Optische Messtechnik GmbH

The Digilux 9500 of the Optronik line is a high caliber luxmeter for the precise measurement of illuminance, luminousintensity in the lab, or determination of luminous flux with an integrating sphere. It is equipped with a state-of-the-art photocurrent amplifier and microprocessor technology, and offers multiple operating and display functions with an excellent price-performance ratio.

Product

IPC-730 Barebone PC With AIMB-788E

-

Advantech Co. Ltd.

Advantech Co. Ltd.

Barebone PC Solution：Wallmount chassis with AIMB ATX MB powered by Intel CPU. IPC-730 barebone PC supports the latest Intel 12th/13th/14th generation Core™ i9/i7/i5/i3 & Pentium®/Celeron® processor with Q670E chipset.

Product

3.5” Embedded SBC With AMD® RYZEN™ Embedded V1807B/V1605B APU, DisplayPort, 2 HDMI, LVDS And 4 GbE LAN

CAPA13R

-

Axiomtek Co., Ltd.

CAPA13R - Axiomtek Co., Ltd.

The CAPA13R is powered by the onboard AMD RYZEN™ Embedded V1807B/V1605B processor with Radeon™ Vega graphics. The 4K embedded board is well-suited for graphics-intensive applications such as medical imaging, video surveillance, 3D simulators, optical quality control, digital signage, kiosks/POI, thin clients, and more. The integrated AMD RadeonTM RX Vega graphics with support of DirectX 12 and OpenGL 4.5 marks the cutting edge of embedded graphics. The CAPA13R can deliver truly impressive user experiences and outstanding 3D graphics quality through two HDMI, one DisplayPort and one LVDS interfaces. Its onboard CPU is attached on the rear side of the board, which can aid with heat dissipation and offers flexibility for easy system integration and minimum maintenance. Moreover, the CAPA13R offers multiple expansion interfaces with one M.2 Key E slot for wireless modules and one M.2 key B slot for storage cards. One 260-pin SO-DIMM socket on the CAPA13R supports up to 16GB of DDR4-2400 (V1605B) and DDR4-3200 (V1807B) memory. The system has a +12V DC power input.

Product

16-Channel VME RTD/Resistance Input Module

V410

-

Highland Technology, Inc.

V410 - Highland Technology, Inc.

The V410 is a 6U VME module that provides sixteen independent analog inputs that may be used to read RTDs, thermistors, and other similar resistive sensors. It can also read cryogenic diodes. Users may set input range and adjust other settings at VMEbus speed, and depending on the range selected the microprocessor will do the necessary calculations and output voltage, resistance, or temperature. Temperature conversion is available for 100Ω and 1000Ω, series 385 and 392, platinum RTDs.

Product

8-slot ATX-supported PICMG 1.3 Bus Half-size Backplane

HAB208

-

Axiomtek Co., Ltd.

HAB208 - Axiomtek Co., Ltd.

The HAB208 has a PICMG 1.3 CPU card slot, a PCIe x 16 slot and a total of six 32bit/33MHz PCI slots. The onboard 24-pin ATX power connector and 8-pin connector for thermal detected board are featured. Furthermore, the backplane supports two onboard SATA ports (optional function). The HAB208 is perfect fit for AXIOMTEK's half-size CPU cards, the SHB210 and SHB211, which are built around the PICMG 1.3 form factor. We have enclosures, the AX60551 & AX60552, to house the backplane.

Product

Power Supply ICs For R-Car

-

Renesas Electronics Corp.

Renesas Electronics Corp.

R2A11301FT is a single-chip system power supply for CPU core and DDR (DDR2 and DDR3).

Product

Acid Number Tester

LD-LAAT-A12

-

Labodam

LD-LAAT-A12 - Labodam

LabodamLD-LAAT-A12is automated and controlled by microprocessor. It is designed and made as per the ASTM D664-11a Test Methods for Acid Number of Petroleum Products.

Product

Low pin and internal configurable analog MCU

RL78/G11

-

Renesas Electronics Corp.

RL78/G11 - Renesas Electronics Corp.

The RL78/G11 microcontroller line-up concept is based on small packages like 20 to 25pin, in small 16KB flash memory and rich analog peripherals such as A/D converters, D/A converters, comparators and PGA and these are configurable as PGA+ADC+VBGR, PGA+CMP, CMP+DAC/VBGR, or PGA+CMP+DAC/VBGR. Using the smart features like DTC and ELC a lot of peripherals can be connected internally to reduce CPU workload and can save overall power consumption. It also supports very low power operation (100 uA @ 1 MHz ) and a high speed 4µs wake up. Available in small 3x3mm² WFLGA , 4x4mm² HWQFN and standard 20pin LSSOP, this MCU line is suitable for sensor application, Lighting/power sources and many small appliances.

Product

200KHz AUTOMATIC TRANSFORMER TEST SYSTEM

VE2729XAU

-

Vasavi Electronics

VE2729XAU - Vasavi Electronics

Its a Microprocessor Based 200KHz Automatic Transformer Tester with inbuilt 20 Pin Channel Scanner for Automatic Switching and Testing Coils & Transformers (Ferrite) with Max. 20 PINS. Test Parameters : -> Inductance (L)-> Leakage Inductance (Lk)-> Capacitance (C)-> DC Resistance (Rdc)-> AC Resistance (Rac)-> Turns Ratio with Winding Polaity-> Quality Factor (Q)-> Impedance (Z)

Product

RX Family of 32-bit High Power Efficiency MCUs

RX100

-

Renesas Electronics Corp.

RX100 - Renesas Electronics Corp.

The RX100 Series is the RX Family's entry-level 32-bit MCUs with excellent cost performance and ultra-low power consumption. It delivers a max. of 32MHz CPU operation with 8 to 512KB of embedded flash memory. In addition it features cutting-edge peripherals like capacitive touch and LCD drive as well as USB. The RX100 Series can be used for system control or user interface applications systems such as healthcare devices, home appliances, office equipment, and measuring equipment.

Product

Oxygen Bomb Calorimeters

-

Labodam

Labodam

Labodam oxygen bomb calorimeters are designed with high precision sensors and microprocessors to get reliable and accurate results. They are designed and made as per the International Standards ASTM D5865-13 Test Methods for Heat of Coal, ASTM D240-17 Test Methods for Calorific Value of Petroleum Products, and ASTM D4809-13 Oxygen Bomb Calorimeter.