Product

Optical Passive Module

-

East Photonics, Inc.

East Photonics, Inc.

Based on thin film technology in Auto Production system, Video Overlay products allow CATV wavelength with IP to be used for uni-or bi-directional transmission. These devices are designed for long life service under the most demanding field conditions.

Product

Optical Fiber Identifier

-

OrienTek Optical Technology Ltd.

OrienTek Optical Technology Ltd.

Optocal Fiber Identifier Economical Solution for Integrated Fiber Preparation Tool Demand● 4 easy-change chucks for:bare fiber, patch cords & ribbon fiber● Identifies 3 common test tones● Identifies dominant traffic direction, audible alarm● Approximate core power reading● Low false detection & insertion loss● Very easy to operate● Battery low indication

Product

Optical Fiber

10 Gbps SFP+

-

Liverage Corp

10 Gbps SFP+ - Liverage Corp

Are designed for 10 Gbps serialoptical interfaces for data communications with multimode fiber (MMF).

Product

Optical Fiber Tensile Jig

-

Shimadzu Corp.

Shimadzu Corp.

This jig is designed for tensile testing optical fibers and other brittle fibers. The jig consists of upper and lower pneumatic flat grips with flat grip faces followed by large-diameter capstans.

Product

Absolute Optical Inclinometer

A2T

-

U. S. Digital

A2T - U. S. Digital

The A2T is a single axis, digital gravity angle sensor. The A2T serves as a full 360 range absolute tilt sensing programmable level with either digital or analog output. Internally, a rotary bar coded disk is mounted to a weighted gravity driven wheel. A micro-controller strobes an LED to transfer the bar code image onto an optical linear array, then decodes the position every 2 mSec. Magnetic damping provides fast response and settling time while virtually eliminating overshoot and oscillations. An internal EEPROM stores field programmable parameters such as resolution, zero position, direction swap, and mode. This second generation design virtually eliminates the primary accuracy limitation of first generation inclinometers, which is sitation (hysteresis).

Product

FMC for High Speed Optical Communication Dual QSFP+ FMC

FMC424

-

Sundance Multiprocessor Technology Ltd.

FMC424 - Sundance Multiprocessor Technology Ltd.

The FMC424 is a dual QSFP+ FPGA Mezzanine Card. Electrically compliant with the VITA 57.1 standard the FMC424 is compatible with 4DSP FPGA carrier cards offering High Pin Count connectors. It also allows for the option to stack an additional FMC over it. Any of the 4DSP FMC that use LVDS and single ended signaling only can be mounted over the FMC424, thus offering users with the ability to build a complete high speed data acquisition, waveform generation and optical communication solution while using a single FMC site on an FPGA carrier card.

Product

Integrated Solution for Digital Switching & Fiber Optics Operational Verification

VERTA

-

Teradyne, Inc.

VERTA - Teradyne, Inc.

When incorporated into defense/aerospace ATE, Verta enables reliable, error-free bus communication and interoperability tests to verify performance of high-speed, optically networked military weapon assemblies.

Product

Semrock Optical Filters

-

Idex Health and Science

Idex Health and Science

IDEX Health & Science offers a comprehensive line of Semrock optical filters. We set the standard in performance, quality, and reliability for the life science, point-of-care, clinical diagnostic, and analytical instrumentation industries. We have applied patented design techniques to create some of the most spectrally sophisticated optical filters on the market. Whether you select from our extensive catalog or we design a custom filter to your exact specifications, you can be confident of our uncompromising quality, reliability, and reproducible results.

Product

32 Channel Optically Isolated Digital Card

104-IDIO-16

-

Acces I/O Products, Inc.

104-IDIO-16 - Acces I/O Products, Inc.

The Model 104-IDIO-16 is a 32-channel PC/104 utility board featuring 16 optically isolated inputs and 16 optically isolated solid state outputs. The isolated, non polarized inputs may be driven by either DC sources of 3-31V (or higher by special order) or AC sources at frequencies of 40Hz to 10KHz

Product

Piezoelectric Vibration Pickup

PU-601R

-

JFE Advantech Co., Ltd.

PU-601R - JFE Advantech Co., Ltd.

General purpose hand-held type

Product

PXI Dual 2 Channel Fibre Optic LC

40-855-422

-

Pickering Interfaces Inc.

40-855-422 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

PXI Single 4 Channel Fibre Optic Mux FC/PC

40-850-114

-

Pickering Interfaces Inc.

40-850-114 - Pickering Interfaces Inc.

The 40-850-114 4-channel multiplexer is part of Pickering's range of PXI Fiber Optic MEMS Switching modules. They are available in many high density formats with a choice of different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

Glow Discharge Optical Emission Spectrometer

GD-Profiler 2™

-

HORIBA, Ltd.

GD-Profiler 2™ - HORIBA, Ltd.

The GD-Profiler 2™ provides fast, simultaneous analysis of all elements of interest including the gases nitrogen, oxygen, hydrogen and chlorine. It is an ideal tool for thin and thick films characterization and process studies.

Product

Optical Power Meter with Optical Head

GM8012 + 2 X GM8300X

-

UC Instruments, Corp.

GM8012 + 2 X GM8300X - UC Instruments, Corp.

The UC8820 + 2 X UC8820X optical power meter with optical head offer superior performance for the test of DWDM components, AWG & PLC components, optical amplifiers, and other general purpose of fiber optical test and measurement applications. It is special design for volume production line application.

Product

Dispersion Compensation Optical Fiber Module

DCM-G.652-C-Fxx

-

Hangzhou Huatai Optic Tech. Co., Ltd.

DCM-G.652-C-Fxx - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai and DCM-G.652-C-Fxx dispersion compensation fiber module, is negative dispersion compensation based on optical fiber technology, can effectively compensate for G.652 standard single-mode fiber transmission band of 1525 ~ 1565nm dispersion and dispersion slope characteristic.

Product

2D Automated Optical Inspection Systems (2D-AOI)

BF1 Series

-

Saki Corporation

BF1 Series - Saki Corporation

Saki’s unique line scanning technology and coaxial overhead lighting enables high-speed accurate inspection.

Product

Optically Isolated Measurement System

IsoVu

-

Tektronix, Inc.

IsoVu - Tektronix, Inc.

IsoVu offers complete galvanic isolation and is the industry’s first measurement solution capable of accurately resolving high bandwidth, low voltage differential signals in the presence of large common mode voltages. The stand out feature of IsoVu™ is its best in class common mode rejection across the entire bandwidth. Accurate differential measurements rely on a measurement system’s bandwidth, rise time, common mode voltage, common mode rejection capability, and the ability to connect to smaller test points to characterize devices that are shrinking in size and increasing in performance. Despite these requirements, advancements in test and measurement for power testing, EMI testing, ESD testing, and remote measurement capability have been minimal at best and have not kept pace with changing requirements. While differential voltage probes have had modest performance gains in regard to bandwidth, these probes have failed to make any substantial improvements in regard to common mode rejection, and connectivity. IsoVu is a leap forward in technology and is the only solution with the required combination of high bandwidth, high common mode voltage, and high common mode rejection to enable these differential measurements.

Product

Optical Plummet Instrument

TELIM

-

F. W. Breithaupt & Sohn GmbH & Co.KG

TELIM - F. W. Breithaupt & Sohn GmbH & Co.KG

*Magnification 42x*Aperture 50mm*Cross levels (20‘‘/2mm)distance approx. 800m*Accuracy ± 1mm/100m*Made in Germany

Product

PCIe Fast Multifunction, Multichannel Counter Board, Optically Isolated, 10MHz RS-422 Inputs

APCIE-1711-10MHZ

-

TEAM SOLUTIONS, INC.

APCIE-1711-10MHZ - TEAM SOLUTIONS, INC.

The APCIe-1711 board is a fast multifunction and multichannel counter board for the PCI Express bus. The strengths of this board are its wide range of applications and high precision and reliability for industrial applications. With this board you can realise many different applications on the same hardware base. The board is supplied with a pool of functions which provide the user with maximum efficiency yet minimum space and parts requirement. The functions are individually configured for each channel through the supplied software. The flexible programming facilities on this board allow many different user applications to be quickly and easily developed and reconfigured as further requirements arise. Thanks to the FPGA board structure, further counting applications can be realised through software adaptation.

Product

Optical Component Test

-

Luna Innovations Inc.

Luna Innovations Inc.

Test and characterize modern optical components, including photonic integrated circuits (PICs) and silicon photonics, with unmatched speed, precision and accuracy. Accelerate and improve your design or optimize your production with Luna’s suite of component analyzers and testers.

Product

Optical Polarization and Dispersion Solutions

-

Keysight Technologies

Keysight Technologies

Test & measurement capabilities for analyzing polarization properties of optical signals are indispensable in todays optical R&D-labs and manufacturing floors. The Keysight N778x Polarization Analysis and Control series offers high speed instruments for high performance characterization and verification of optical components and sub-systems.