Product

Low Noise Amplifiers

-

Macom Technology Solutions Holdings Inc.

Macom Technology Solutions Holdings Inc.

MACOM low noise amplifier MMICs cover a frequencies from DC to 86 GHz operation for a wide range of applications, including network infrastructure, radar and communication systems. MACOMs portfolio of low noise amplifiers offer a broad array of noise figures, input IP3, and input power in bare die and a variety of package types. Offerings include wideband distributed topologies and self or actively biased configurations tailored to system design needs.

Product

Noise Meters

-

PCE Instruments

PCE Instruments

Here you will find a full range with an industrial standard noise meter / sound meter to suit every requirement. With the portable noise meter you can carry out measurements quickly to gain control of a situation or to set the sound meter to take timed measurements. The noise meter is important for all industries, especially by using it as a mobile noise meter which is able to assess office stress levels or street noise levels. Often problems arise from noisy neighbors or if bars and restaurants are in residential areas and produce noise levels after 10 pm in excess of what local laws permit. A noise meter / sound meter will help here.We can assess which noise meter or sound meter you require in relation to the issue you have and the relating laws (requirements regarding a sound meter and a sound meter’s usage vary depending on the country). We also have noise meter microphone extension cords, tripods, sound meter calibrators and calibration certificates for most noise meter models.

Product

Full Band Noise Figure and Gain Test Extenders

STG-06-S1

-

ERAVANT

STG-06-S1 - ERAVANT

Full band noise figure and gain test extenders are offered to extend noise and gain measuring capabilities up to higher millimeterwave frequency ranges. These extenders are designed to interface with noise and gain test systems that have an input IF of 10 MHz to 1.6 GHz, such as the industry standard Keysight 8970A/B, N8975A and Maury MT 2075B. The noise figure and gain test extenders include a high-performance, solid-state noise source (STZ series) and a full waveguide down converter (STC series), which consists of a Faraday isolator (STF series), full band mixer (SFB series), frequency multiplier, and IF amplifier. A frequency source with an output signal in the frequency range of 10 to 20 GHz is required as a local oscillator for the down converter. The noise source is automatically powered on and off by the noise figure meter.

Product

dBAlert Personal Noise Warning Unit

GA907

-

Castle Group Ltd.

GA907 - Castle Group Ltd.

dBAlert! activates only when the noise exceeds a pre-set level, warning exposed workers that noise levels have become dangerous and to put on their ear-defenders.

Product

Noise and Vibrations Meters

dB alert

-

PASI srl

dB alert - PASI srl

Monitoring / Noise and vibrations meters

Product

Phase Noise Measurement Up To 70 GHz

S930317B

-

Keysight Technologies

S930317B - Keysight Technologies

S930317B enables phase noise measurements using a PNA or PNA-X vector network analyzer. Simplify your measurement workflow by measuring phase noise on the same connection as your network analysis measurement of 2-port active devices up to 70 GHz, without needing to connect a spectrum analyzer or harmonic mixer.

Product

E-Band Low Noise Amplifier MMIC

AWL-7186

-

Anokiwave Inc.

AWL-7186 - Anokiwave Inc.

The AWL-7186 is a 4-stage ultra-low noise amplifier that provides a noise figure of less than 3.5 dB, an output P1dB of +8 dBm, and an adjustable gain range of 15 dB. The MMIC features exceptional gain flatness and superior noise performance over a very wide bandwidth. It is implemented in 0.1 um GaAs PHEMT technology.

Product

Optical Noise Analyzer

A0040A

-

SYCATUS Corp

A0040A - SYCATUS Corp

Optical Noise Analyzer is the industry first solution for evaluation of optical frequency noise of lasers as power spectrum density.

Product

Noise Figure Analyzer, Multi-touch, 10 MHz to 26.5 GHz

N8975B

-

Keysight Technologies

N8975B - Keysight Technologies

The N8975B high performance noise figure analyzer is designed to make fast, accurate and repeatable noise figure measurements. When paired with an SNS Series noise source and U7227 Series USB preamplifier the ENR data from the SNS and USB preamplifier data automatically downloads into the N8975B.

Product

10 MHz to 55 GHz Noise Sources

CNS346 Series

-

Spanawave Corporation

CNS346 Series - Spanawave Corporation

The Spanawave CNS346 Series is designed for precision noise figure measurement applications. The superior VSWR characteristics reduce multiple reflections of the test signals and significantly increase the measurement accuracy of most noise figure set-ups. The CNS346 Series noise sources have broadband coverage and extremely good temperature and voltage stability, for the finest noise figure meter-compatible laboratory standards. Outputs of 6, 15.5 and 22 dB ENR are available, allowing the units to accurately measure noise figures up to 20 ,30 and 36 dB respectively.

Product

Ultra-Low Noise Filter, 42 V / 105 MA, 50 Ω

N1298B

-

Keysight Technologies

N1298B - Keysight Technologies

The N1298 Series is a collection of low noise filters for the Keysight B2960 Series 6.5-digit low noise source.

Product

SNS Series Noise Source 10 MHz to 26.5 GHz (ENR 15 dB)

N4002A

-

Keysight Technologies

N4002A - Keysight Technologies

The SNS series N4002A noise source was designed to measure DUT noise figures reliably and accurately up to 30 dB from 10 MHz to 26.5 GHz.

Product

OPTICAL PHASE NOISE TEST AND MEASUREMENT SYSTEM

-

OEwaves, Inc

OEwaves, Inc

OEwaves’ HI-Q® Optical Test Measurement System utilizes a homodyne methodology for automated measurement capable of testing ultra-low phase noise laser sources. The user friendly test system is capable of rapidly measuring laser phase noise and estimating its FWHM linewidth down to < 3 Hz without complex setup or reference lasers normally required to make such a narrow linewidth measurement.

Product

Noise Figure Analyzer, Multi-touch, 10 MHz to 40 GHz

N8976B

-

Keysight Technologies

N8976B - Keysight Technologies

The N8976B high performance noise figure analyzer is designed to make fast, accurate and repeatable noise figure measurements. When paired with an SNS Series noise source and U7227 Series USB preamplifier the ENR data from the SNS and USB preamplifier data automatically downloads into the N8976B.

Product

Low Noise Amplifier

-

RFecho

RFecho

Low noise amplifier with a typical small signal gain of 22 dB and a nominal noise figure of 5dB across the frequencyrange of 90 to 110 GHz.

Product

Noise & Vibration Tester

-

WinTek s.a.s.

WinTek s.a.s.

System PC Based particularly suitable for vibration and noise measurements for the characterization of mechanical, electromechanical and electroacoustic and for the control and monitoring of installations of production. Complete configurability for the use of platforms PC (Notebook, desktop, PXI) suitable to applications of both static labotatorio, both dynamic (eg road-test) and also in the production line (functional tests and monitoring).

Product

Low Noise, High Performance, FTTP High Power Multi-port Optical Amplifier with a Gain Spectrum Band

MX5800 Series

-

Maxcom Inc.

MX5800 Series - Maxcom Inc.

Each output port for the optical amplifier has built-in high performance CWDM. Every external up-link optical port of the optical amplifier can conveniently connect with an OLT. Each of the 1550nm (CATV)’s output optical ports will multiplex 1310/1490n’s data stream from an external OLT, reducing the quantity of the components and improving the performance and reliability of the system.

Product

Ultra-low Noise Phase Inverter - Buffer

WMA-IB-LN

-

Falco Systems

WMA-IB-LN - Falco Systems

The WMA-IB-LN can be used to double the output voltage of two high voltage amplifiers by driving them in bridge mode, or as high impedance input buffer while maintaining precision and ultra-low noise. The WMA-IB-LN model has been designed specifically for the Falco Systems WMA-200 high voltage amplifier. Two WMA-200 amplifiers combined with one WMA-IB-LN provide unprecedented noise performance and output voltage range.

Product

Low Acoustic Noise and Compact Range

m-series

-

IMV Corporation

m-series - IMV Corporation

DC powered cooling fan is built-into the shaker. Natural air cooling is also used when the cooling fan is stopped for silent operation. (with a reduction in performance)