Plunger Clips
contact that seizes a connection point on the DUT.
-
Product
Plunger Clip
BU-00201-0
-
Plunger clip • Material: Cap & Body: glass filled nylon; Spring: Stainless steel; Contact: beryllium copper; insulator to a single contact point • Length: 1.75” (44 mm)(BU-00201-*); 2.50” (63 mm)(BU-00202-*); 3.50” (88 mm)(BU-00203-*); • *Std Colors: -0 Black -2 Red • Rating: 1000 Volts, 10 Amps.
-
Product
Plunger Tester
PL2003
-
Designed and manufactured in accordance with ASTM F414, DOT571.109, F870 & JIS D4230 standards. New generation of PL-2000X series Plunger Testers, equipped with servo-hydraulic system to control the testing speed, are available fpr customers to select the suitable model. Test functions including Radial elasticity test, Tread footprints test, Tire dimension test, Bead unseating test, Lateral elasticity test and Pressure distribution analysi for Footprints.
-
Product
Grabber Test Clips
-
Grabber test clips are specially designed with tips that slide onto wire-wrap terminals. And with available do-it-yourself Grabber test clips, the user can assemble quickly and with ease.
-
Product
Guide Bolt "clip"
-
Guide bolt for LOXX top part. The guide bolts are used for precise guidance between the board support plate and the hold-down plate. The "clip" version is an optimised guide bolt that can be attached quite easily with a "CLICK".
-
Product
Spring Clip Fixture
16092A
Test Fixture
Use this test fixture with parallel electrodes for impedance evaluation of both lead and SMD components.
-
Product
Alligator Clip Leads
U1781A
Accessory Kit
The Keysight U1781A is to be used with the U1700 Series Handheld Capacitor and LCR meters. These clips are shipped as standard with every handheld capacitor or handheld LCR meter.
-
Product
DIP Test Clips
-
Low-profile fine-pitch chips, desnely populated boards, or vertical boards, Pomona test clips connect you with confidence.
-
-
Product
Alligator Test Clips
-
Alligator clips are spring loaded clips that are used to temporarily connect wires to components on circuit boards, connector pins, or other terminals.
-
Product
Kelvin Clips
129141
-
Comprising of a Red/Grey & a Black/Grey Kelvin Crocodile Clip lead using low loss 1mm²multistranded ( 7/36/0.071. ) double skin silicone cables terminating in 4mm ...
-
Product
Fine Pitch Double Plunger Probe FP300D2901P015U025L057H
1024430
-
The Fine Pitch Double Plunger Probe FP300D2901P015U025L057H (item number 1024430) is designed for precise contacting where installation space is limited. Tip style 29 (4-point crown) targets FP300D2901P015U025L057H at solder bumps and pads; Fine Pitch Probes are used, among other applications, in semiconductor final test, WLCSP solutions, MEMS and micro-PCB testing. In FP300D2901P015U025L057H, the double-plunger design provides spring-loaded contacting on both sides and can compensate for mechanical tolerances in compact interfaces. Key design data includes pitch 0.4 mm / 16 mil, spring force 25 cN, continuous current 1.4 A. As an H version, FP300D2901P015U025L057H extends the operating range to high-temperature applications up to 200 °C.
-
Product
Medium Kelvin Clip Lead
16089B
Accessory Kit
Measure odd-shaped components that you cannot measure using conventional fixtures
-
Product
Double Plunger Probe FP510D0101B035G025L166
1120811
-
The FP510D0101B035G025L166 is a state-of-the-art Double Plunger Probe that belongs to the FP-D family. This probe features a pitch of 0.70 mm, making it suitable for precision applications where small measurements are crucial. It operates effectively over a wide temperature range of -45°C to +100°C, ensuring reliable performance in various environmental conditions. Designed for versatility and accuracy, the probe's continuous current rating of 1.00 A and its typical contact resistance of just 70 mOhm underline its excellent electrical performance, making it an ideal choice for demanding electronic applications.
-
Product
Scientifically Calibrated Audio Clips
AudioRef™
-
AudioRef is a package of scientifically calibrated audio reference clips that enable professionals to accurately set up and evaluate audio monitoring equipment.
-
Product
T-Type Platinum Sheet Electrode Clip
TTP-1
-
TTP-1 T-Type Platinum Sheet Electrode Clip is an electrode holder, clip or electrochemical cell accessory designed to position electrodes securely and provide stable electrical connection during laboratory electrochemical testing.
-
Product
Fine Pitch Double Plunger Probe FP650D2901B035G030L057
1131051
-
The Fine Pitch Double Plunger Probe FP650D2901B035G030L057 (item number 1131051) is designed for precise contacting where installation space is limited. Tip style 29 (4-point crown) targets FP650D2901B035G030L057 at solder bumps and pads; Fine Pitch Probes are used, among other applications, in semiconductor final test, WLCSP solutions, MEMS and micro-PCB testing. In FP650D2901B035G030L057, the double-plunger design provides spring-loaded contacting on both sides and can compensate for mechanical tolerances in compact interfaces. Key design data for FP650D2901B035G030L057 includes pitch 0.8 mm / 31 mil, spring force 30 cN, continuous current 4 A.
-
Product
Self-Adhesive Clips for Liquid/Chemical Sensor Rope
ENVIROMUX-CLP10-LD
-
Use to prevent sensor rope cable from shifting after installation. Self-adhesive backing for easy installation. Material: Nylon. Quantity: 10 clips. Compatible with ENVIROMUX-LDSx-y, ENVIROMUX-CDSx-y, ENVIROMUX-LDx-y and ENVIROMUX-CDx-y.
-
Product
BNC (F) To Alligator Test Clips
2630
-
BNC (f) to alligator test clips. Converts BNC (male) cables / connectors to alligator test clips for test versatility. BNC connector is molded directly to the wire for pull strength durability and dust and moisture resistance.
-
Product
Fine Pitch Double Plunger Probe FP300D2901B016G019L032
1023004
-
The Fine Pitch Double Plunger Probe FP300D2901B016G019L032 (item number 1023004) is designed for precise contacting where installation space is limited. Tip style 29 (4-point crown) targets FP300D2901B016G019L032 at solder bumps and pads; Fine Pitch Probes are used, among other applications, in semiconductor final test, WLCSP solutions, MEMS and micro-PCB testing. In FP300D2901B016G019L032, the double-plunger design provides spring-loaded contacting on both sides and can compensate for mechanical tolerances in compact interfaces. Key design data for FP300D2901B016G019L032 includes pitch 0.4 mm / 16 mil, spring force 19 cN, continuous current 1.4 A.
-
Product
Crocodile Clip Simple Electrode Holder
CCS-1
-
CCS-1 compact electrode holder with a PTFE sleeve and stainless-steel or copper crocodile clip, providing stable electrical contact for electrochemical experiments.
-
Product
Kelvin IC Clip Lead
16089C
Accessory Kit
Measure odd-shaped components that you cannot measure using conventional fixtures
-
-
Product
Double Plunger Probe P17645B121G060ML082
1013895
-
The P17645B121G060ML082 Double Plunger Probe stands out as the ideal solution for a wide range of applications, providing exceptional reliability and high performance. With a temperature range of -45°C to +100°C, this probe is designed to endure challenging environments while delivering consistent results. The continuous current rating of 5.00A and a typical contact resistance of just 30.00 mOhm ensure that it meets the rigorous demands of modern electronic systems.
-
-
Product
Wire Piercing Clips
619
-
This new clip makes wire piercing much easier. Just slide the wire into the cradle and screw the pin down into the wire. This method is clean and leaves minimal wire damage. If you have to proceed to pierce the wire, do it the right way with 619.
-
Product
Dual-Head Alligator Clip Leads (10A/20A)
DHA-1
-
Dual-head alligator clip test leads for electrochemical cells, laboratory instruments, power supplies, and general electrical connections. Available in multiple colors and cable lengths, with 10A and 20A current ratings.
-
Product
LED Probe Clip Light
U1176A
Accessory Kit
Clip this 3-in flashlight on your test probes for great visibility when using your handheld DMMs in dark places
-
Product
PTFE Platinum Sheet Electrode Clip
FPE1
-
PTFE platinum sheet electrode clip designed for securely holding flat working electrodes during electrochemical experiments. Compatible with platinum sheets, carbon paper, carbon cloth, ITO glass, and other flat electrode substrates. Manufactured from chemically resistant PTFE with a platinum contact, providing reliable electrical conductivity for electrocatalysis, corrosion studies, battery research, and laboratory applications.
-
Product
Kelvin Clip Test Lead Set
5940
-
Kelvin Clip Test Lead Set. Ideal for resistant measurementsbelow 1 ohm.
-
Product
Test Leads With Screw-Off Alligator Clips
629
-
*Alligator clips screw off / on for more secure connection *Test leads 48” length *1000 Volts max - CATIII *Maximum 10 Amps
