Magnetic Field Mapping
See Also: Magnetic Field, Magnetic Field Meters, Magnetic Field Probes, Magnetic Field Sensors, Magnetic Field Test
-
Product
High-Precision Teslameter With 3-Axis Interchangeable Hall Probes
3MH6-E
-
The 3MH6-E High-Precision Teslameter integrates cutting-edge technology with ease of use for precise magnetic field measurements. It features a C-type 3-axis Hall Probe that allows for the measurement of the magnetic field components (Bx, By, Bz) while also providing temperature readings. With a remarkably low mutual orthogonality of less than 0.1 degrees between the probe's measurement axes, this instrument ensures exceptional accuracy in magnetic field mapping. The Teslameter is designed for versatility, allowing full interchangeability between any 3D Hall probes within the 3MH6-E series, maintaining a DC accuracy of better than 100 parts per million (ppm).
-
Product
Magnetic Transducer With Fixed Fully Integrated 1-/ 2-/ 3-Axis Hall Probe
F3B
-
The F3B Magnetic Transducer incorporates a fully integrated 3-axis Hall Probe, elevating the measurement precision required in diverse applications. Designed with a high spatial resolution, this transducer excels in reliably capturing the intricate dynamics of magnetic fields. It features advanced on-chip signal processing technology that delivers a frequency bandwidth ranging from DC to 25 kHz, thus making it suitable for a variety of operational environments including laboratories and production lines. The orthogonality error is less than 1°, enhanced by the integrated CMOS technology that ensures precise fabrication of Hall elements and improved angular accuracy, making this device not just versatile, but also critical in applications demanding high precision, such as 3D magnetic field mapping, the development and characterization of magnet systems, and quality control in electromagnetic devices.With additional features like temperature compensation through an integrated sensor, the F3B is robust against external disturbances, rendering it reliable for real-time measurements. The electronic module provides essential features like signal amplification, offset cancellation, and tunable sensitivity adjustments, all of which further enhance its functionality in demanding scenarios. The F3B transducer thus stands out as a vital tool in advancing the research and industrial standards in magnetic field measurement and control, supporting probes of various types including A, C, K, H, and L, along with sliding Hall probes, showcasing exceptional adaptability and performance.
-
Product
Magnetic Field Camera: mapping for MRI applications
MFC2046
-
MRI and NMR spectroscopy applications require a highly uniform magnetic field, within at most a few ppm. NMR is the only magnetic measurement technique capable of providing a field map with that degree of precision. Introduced 25 years ago, Metrolab’s NMR Magnetic Field Cameras have revolutionized field mapping for MRI magnets. They reduced acquisition times from hours to minutes, positioning errors to fractions of a millimeter, and they rendered human and drift errors negligible. Now, meet the latest generation NMR Magnetic Field Camera, the MFC2046! Map any magnet with the New generation of MFC probe arrays. Magnetometer Teslameter Gaussmeter
-
Product
Teslameter / Gaussmeter For Industrial Application
3MH3
-
The 3MH3 Teslameter/Gaussmeter is a cutting-edge device designed for precision measurement in industrial applications. It features fully integrated 1-, 2-, and 3-axis Hall Probes that deliver high accuracy magnetic field readings across a wide frequency range, including DC and AC up to 1kHz. With an impressive resolution of 100ppm and an accuracy rating of up to 0.05%, the device ensures reliable performance in various settings, from quality control of permanent magnets to magnetic field mapping and process monitoring in production lines.Equipped with a digital module, the Teslameter not only provides an LCD display for real-time monitoring of magnetic field components (Bx, By, and Bz) but also includes a temperature measurement feature, enhancing the device's functionality for comprehensive data analysis. Additionally, automatic data acquisition is possible through USB and RS232 connections, allowing seamless integration into existing measurement routines with widely used programming tools like LabVIEW, Basic, and C++. Whether used in research labs or industrial environments, this Teslameter is engineered to fulfill diverse measurement needs with unmatched precision and ease.
-
Product
Special Mapper Solutions
MMS-1X-RS-THRUST
-
The Special Mapper Solutions (MMS-1X-RS-THRUST) is a sophisticated magnetic field mapper designed specifically for very large and heavy rotors, as well as cylindrical magnetic objects up to 700mm in diameter and weights reaching 100kg, which includes applications like Hall Effect Thrusters. The system offers an extended scanning volume of 600 x 600 x 600mm³, enabling comprehensive measurements across different dimensions. This allows it to handle larger components efficiently without compromising on measurement accuracy.In addition to its robust design for heavy objects, the MMS-1X-RS-THRUST is equipped with a larger rotary stage capable of accommodating thrusters weighing up to 60 kg or more. This makes it an ideal choice for advanced applications in aerospace and similar fields, where precise magnetic field mapping is essential. The system also includes a holder for a Calibration Cube, allowing for on-site calibration of Hall probes to ensure accuracy. Other notable features include a modified touch sensor for easy operation and a low-noise Hall probe that enables measurements in a magnetic field range as low as 10mT, enhancing the versatility and reliability of this measuring device.
-
Product
Magnetic Field Transducer With Integrated 1-Axis (By) Hall Probe
I1A
-
The I1A Magnetic Field Transducer with Integrated 1-axis (By) Hall Probe is designed to measure magnetic fields perpendicular to the probe plane with exceptional accuracy and precision. This transducer is renowned for its low noise and minimal offset fluctuations, ensuring reliable measurements in various applications. The small form factor of the integrated Hall element, measuring just 22 μm x 22 μm, yields remarkable spatial resolution, making it ideal for tasks such as magnetic field mapping and characterization of permanent magnets. Coupled with its integrated temperature sensor, this device allows for effective temperature compensation, greatly enhancing measurement consistency.The I1A transducer excels in different magnetic flux density ranges, including ±0.1T, ±0.2T, ±1T, and ±5T, which can accommodate a variety of applications from laboratory research to on-line quality control in production environments. With an output voltage that is high-level differential and proportional to the measured transverse magnetic flux density, it ensures accurate data transfer. The built-in modules for conditioning signals include features for amplification, non-linearity correction, and sensitivity adjustments that compensate for temperature variations, further enhancing its performance in real-world applications.
-
Product
Calibration Cube / Reference Magnet
-
The SENIS Calibration Cube is an indispensable tool for the precise calibration of magnetic field sensors and mapping equipment. With a homogenous magnetic field accessible through six strategically placed holes in the cube's faces, users can easily place sensors from various sides to calibrate their sensitivity vectors accurately. This makes it an ideal solution for in-situ validation, ensuring reliability and accuracy in the user's environment. The calibration tool not only simplifies the calibration process with its intuitive software guidance, leading to the creation of a sensitivity matrix, but it also defines mechanical referencing with an orthogonality better than 0.1° across all three directions. In addition to its effective calibration capabilities, the SENIS Calibration Cube serves as a stable reference magnet, enhancing the user experience. The cube requires less than 30 minutes for full high-accuracy orthogonality recalibration, making it efficient for routine sensor changes on mappers. The included Calibration Cube Corner Tool further aids in ensuring accurate orientation to external Cartesian coordinate systems, solidifying its role in achieving the highest mechanical accuracy in magnetic sensor applications. Coupled with its dust-free surface for easy cleaning, the SENIS Calibration Cube stands as a reliable and high-performance calibration instrument.
-
Product
Magnetic Transducers With Fully Integrated 1-Axis (Y) Hall Probe
F1A
-
The F1A Magnetic Transducers feature a fully integrated CMOS 1-axis (Y) Hall Probe that offers exceptional sensitivity and high spatial resolution, measuring just 0.4 x 0.04 mm. This high-resolution sensor enables accurate measurements of magnetic fields perpendicular to the probe plane, specifically the By component. Enhanced by a unique spinning-current technique in the biasing circuits, the probes effectively suppress the planar Hall effect, ensuring superior performance in various demanding applications. With a frequency bandwidth extending from DC to 75 kHz, this advanced probe quality control makes it suitable for characterizing permanent magnets, developing magnetic systems, and monitoring electromagnetic devices in both laboratory and production environments.Additionally, the Hall Probe incorporates a built-in temperature sensor for real-time temperature compensation, which ensures the accuracy of measurements. The Module E connected to the Hall Probe amplifies, linearizes, and conditions the output signals to mitigate interference from electromagnetic disturbances. As a robust and highly effective measurement solution, the F1A Magnetic Transducers are ideal for applications ranging from magnetic field mapping to the quality control of magnet systems.
-
Product
Probes, Magnetic Field
EM-6880 | 9 KHz – 520 KHz
-
The EM-6880, EM-6881 and EM-6882 Magnetic Field Probes operate in conjunction with any 50 ohm input impedance receivers.
-
Product
Magnetic Field Sensors
-
Our cylinder sensors for pull rod cylinders can be integrated into many applications. They are mounted with mounting brackets on cylinders with tie rods and DUO rails. The concept is suitable for the most common types of cylinders with any piston diameter. Features: contact-free detection of the piston position, tie rod Ø up to 17 mm, reliable switching behavior, wear-free, resistant to dirt, secure grip, easy installation.
-
Product
Probes, Magnetic Field
EM-6881 | 480 KHz To 30 MHz
-
The EM-6880, EM-6881 and EM-6882 Magnetic Field Probes operate in conjunction with any 50 ohm input impedance receivers.
-
Product
Field Probe for Electric & Magnetic Field Measurement
WP400-3
-
Wavecontrol presents a new and unique field probe for the measurement of electric and magnetic fields that integrates both E & H sensors within dimensions of only 3 cm². Which makes it unique is that Wavecontrol has managed to add an E field sensor in a basic structure of a classical 3 cm² field probe. It has been possible, therefore, to obtain a 3 cm² field probe without compromising the capability of assessing E and H fields of its 100 cm² big sister, the recognized and successful WP400.
-
Product
Magnetic Field Tester
Rotor-Check 400
-
Rotor-Check 400 is a practical testing device used to check the magnetic field strength curve of a rotor. The device and measuring probe connect directly to a Windows PC via USB. It is an ideal solution for precise magnetic field measurement and analysis.
-
Product
Magnetic Field Meter / Gaussmeter
MP-4000
-
The MP-4000 gaussmeter features a graphic LCD touch panel with an innovative user interface and a resolution of 320x480 pixels. An outstanding feature of the new probe electronics is the fast digitization of the measured values with a frequency of up to 200 kHz. This makes it possible to display waveforms with a duration of only 0.1 milliseconds.
-
Product
Magnetic Field Measurement Systems
-
The magnetic field probe performs non-contact current measurements and can be used for real traces. The probe of higher resolution enables pinpoint measurements.
-
Product
Magnetic Field Meter
MP-1000
-
The List-Magnetik MP-1000 magnetic field meter is equipped with externally connectable transverse and axial field probes, making it easy to carry out precise magnetic field measurements. This versatile device is ideal for measuring direct, alternating (true RMS), and pulsed fields, making it suitable for a wide range of magnetic field measurement applications. It is also ideal for measuring residual magnetism.
-
Product
Magnetic Field Sensors
-
Analog Devices magnetic field sensors combine integrated bulk Hall cell technology and instrumentation circuitry to minimize temperature related drifts associated with silicon Hall cell characteristics. The architecture maximizes the advantages of a monolithic implementation while allowing sufficient versatility to meet varied application requirements with a minimum number of components.
-
Product
Residual Magnetic Field Meter
MP-80 V2
-
The MP-80 Version 2 residual magnetic field meter offers a memory for stored measurements and a wireless interface for managing those measurements in the device or the Lima Connect app. These features make magnetic field measurements more efficient, especially when testing residual magnetism and magnetic fields in various applications.
-
Product
Magnetic Field Scanner
-
MAGNET-PHYSIK Dr. Steingroever GmbH
Magnetic field scanners measure the magnetic field around permanent magnets or magnetic systems. The results can be output as a colored 2D, 3D representation or as a table.
-
Product
3 Axis Magnetic Field Meters
-
Display: 4 digits LCD, maximum reading 9999 Range: 20/2000 mG,2/20/200TResolution: 0.1/1 mG or 0 .001/0 .01/0 .1 TAccuracy: (2.5%+5dgt) at 50Hz/60Hz (5.0%+5 dgt) at 30Hz-2000HzSensor: Triple AxisFrequency response: 30Hz to 2000HzOperating temperature & humidity: 5'Cto 40'C, below 80% RHWeight: About 230g
-
Product
Magnetic field sensor ENB
-
Standard-compliant measurement according to EN 62233For use with the measurement system UMS4Suitable for all signal forms due to measuring with reference procedureIsotropic sensor with 3 x 100 cm coil surfaceFrequency range 10 Hz to 400 kHz
-
Product
Magnetic Field Sensor
-
Vernier Software & Technology, LLC
The Magnetic Field Sensor can be used to study the field around permanent magnets, coils, and electrical devices. It features a rotating sensor tip to measure both transverse and longitudinal magnetic fields.
-
Product
Magnetic Field Generator
-
The Com-Power APF-5060 magnetic field generator is specifically geared towards generating magnetic fields for immunity testing. The APF-5060 with its corresponding loop antennas provide a standalone solution for magnetic field immunity testing as per IEC/EN 61000-4-8 and all the derived product standards.
-
Product
Flexible Magnetic Field Probes
-
Projekt Elektronik Mess- und Regelungstechnik GmbH
The active probes are equipped with active amplifier electronics and have an extremely low-impedance output, ie they can also drive long lines. The output signal is calibrated according to specification. They can not only be connected to a certain type of teslameter, but can also be connected to any signal input.
-
Product
3-axis Magnetic field Sensor
FLC3-70
-
Compact, low-power, 3-axis fluxgate magnetometer for the measurement of weak magnetic field down to nanoteslas. Due to its rugged design and extended operating temperature range suited for automotive and aerospace applications and for deep drilling tools.
-
Product
Magnetic Field Meters
-
A scientific instrument used to measure the strength and direction of a magnetic field.
-
Product
Magnetic Field And Permeability Measurement
MAGNETOMAT 1.790
-
Foerster Instruments, Incorporated
The MAGNETOMAT 1.790 is a measuring system for the precision detection of magnetic flux density and relative permeability. The MAGNETOMAT software is used for displaying the measured values and saving and exporting data. The wide range of probes facilitates optimal adjustment to the conditions of the application, such as the measurement of relative permeability within the scope of the quality control of stainless steel and low-permeable (non-magnetic) alloys. Further applications include the long-term monitoring of the magnetic environment, e.g. prior to installing magnetically sensitive devices, and the localization of ferrite enclosures in stainless steel and NE materials. Changes in material (sulfidation, degradation of lamination, structural changes) can also be proven thanks to permeability comparative measurements.
-
Product
Single Axis AC Magnetic Field Sensor
MGC-1A
-
Macintyre Electronic Design Associa
The MGC-1A is a low noise high sensitivity single axis AC magnetic field sensor used for the measurement of audio frequency fields. Because of its innovative design, the MGC-1A amplitude response is insensitive to the frequency of the field over its 30 Hz to 10 kHz frequency band. Accuracy at 1 kHz is ±1%, and the amplitude response stays within 2 dB peak-to-peak over the bandwidth.
-
Product
Compact 3D Magnetic Field Mapper
MMS-2A-ROT
-
The Compact 3D Magnetic Field Mapper MMS-2A-ROT is an advanced system designed specifically for the precise measurement and mapping of cylindrical permanent magnets such as rotors, disks, and rings. Utilizing a 3-axis Hall probe with a sensitivity volume of only 150x150x10 micrometers, it ensures accurate point measurements of magnetic fields with a remarkable accuracy rate of better than 1%. The system supports intuitive Mapper software that enables seamless data acquisition, visualization, and analysis, making it an ideal choice for engineers and researchers requiring high-speed and high-precision measurements in various applications, including production and development environments.With selectable measurement ranges of 100mT, 500mT, and 2T, the MMS-2A-ROT system is adept at capturing both DC and AC magnetic fields at a sampling rate of 30 kSamples/s, allowing for rapid data collection and analysis. The multifunction Data Acquisition Card enhances motor control, further contributing to its fast scanning capability of up to 180 degrees per second. The software offers detailed 3D mapping visualization, enabling comprehensive analysis of multipole magnets and ensuring optimal performance across various setups and operational requirements.
-
Product
Temperature Mapping Sensors
-
Tekscan's thin-film temperature mapping sensors can track real-time temperature data changes between almost any two mating surfaces.
