Filter Results By:
Products
Applications
Manufacturers
-
product
Vapor Concentration Monitor
IR-300 Series
Metal-Organic Chemical Vapor Deposition (MOCVD) is widely used in the manufacture of LEDs, optical devices and other components. Liquid and solid precursors are delivered to the reaction chamber by controlling the temperature, pressure and the carrier gas flow rate (bubbling method). Process results can be affected by changes especially in temperature and liquid level. The in-line IR-300 Series measures and reports the precursor concentration in real time.
-
product
Liquid Level Switch
CL-10GH
The Dynatrol® CL-10GH Liquid Level Detector and EC-501A(G) Control Unit is used for high, intermediate or low point level detection of liquids and slurries. A unique vibrating principle permits design and operation features not available with other types of liquid level detectors.
-
product
Tan Delta Test System
Precision measuring bridge is designed for determining the capacitance and dielectric dissipation factor of liquid and solid insulants, cables, capacitors, line transformers, generators, motors, bushings etc. Furthermore it can also be used for power loss measurement on shunt reactors or similar apparatus. This system is suitable for both low and high voltage measurement at line frequency. Measurement reports can be printed. This measuring equipment has been specially developed to maximise efficiency in production and quality control environments. Its outstanding accuracy also makes it suitable for laboratory and research applications.
-
product
Conductivity-Thermometer
HD2106.1
conductivity, liquid resistivity, total dissolved solids, salinity and temperature.
-
product
Pressure Measurement
HighReach Measuring & Controlling System Co.,Ltd
The measurement of an applied force by a fluid (liquid or gas) on a surface.
-
product
Oil Break Down Voltage Test Set
This set is widely used in industries to test the load bearing capacity of insulating oil or liquid.
-
product
Dynatrol® Liquid Level Switch
CL-10RH
The Dynatrol® Type CL-10RH Liquid Level Detector and EC-102B or EC-103C Control Unit is used for high, intermediate or low point level detection of liquids and slurries. This is typically a replacement unit for existing CL-10RH units in the field. The CL-10GH is phasing out the older style liquid level detector.
-
product
Radar Level Transmitter
DR5400
DR5400, FMCW 24 GHz open air radar is a market entry level transmitter for liquids in basic process applications. This model has proven PP Drop antenna design which is insensitive to condensation.
-
product
Ultrasonic Flowmeter
F8
Gentos Measurement & Control Co.
The F8 Flow meters is a state-of-the-art universal transit-time flow meter for heavy industrial applications. Sophisticated electronics incorporating the latest developments in digital signal processing coupled with powerful ultrasonic transducers deliver highly accurate flow measurement for liquids in full pipes.
-
product
Spectrometer Systems
FLAME-CHEM
FLAME-CHEM spectrometers are fully integrated UV-Vis and Vis-NIR systems for measuring absorbance and transmission of liquid samples in cuvettes. FLAME-CHEM is a great option for teaching labs and research facilities where users seek the performance and flexibility advantages of the Flame spectrometer in a compact, small footprint instrument. Each FLAME-CHEM system comprises a preconfigured Flame spectrometer, a direct-attach light source and a cuvette holder for 1 cm pathlength cuvettes – all in a single package. UV-Vis (200-850 nm) and Vis-NIR (350-1000 nm) models are available. Add OceanView spectroscopy software (purchased separately) to complete your system.
-
product
Photometer
Spectra Candela II
The Spectra Candela II (Model C305) is a compact and easy to use light meter provides an easy, economical means of making highly accurate measurement of indoor and outdoor light levels. Measures foot-candles, lux. Measurement results displayed on Electroluminescent backlit custom liquid crystal display (LCD).
-
product
Constant Pressure Dual Head Pump
ReaXus CP Class
The high performance CP Class consists of dual-headed, positive displacement piston pumps with constant pressure control, covering a wide range of flows, with pressures up to 25,000 psi. Standard fluid path material is Stainless Steel. Other available features include Hastelloy fluid path with jacketed pump heads for temperature controlled processes.The CP Class pumps are widely used for Liquid Chromatography Column packing for 4.6 mm columns, as well as many process applications. The constant-pressure feedback loop automatically adjusts solvent flow to maintain constant system pressure and allows the user to select a wide range of process parameters, including desired pressure set point, ramp rate, and upper flow rate limit.The CP Class is available as standalone units, and also with the Teledyne SSI Column Packing System (called Pack-in-a-Box). Features include:20 mL packing reservoir assembly4.6 mm pre-column assemblyTwo (2) 4.6 mm x 150 mm columns10 gram bottle of C18 stationary phaseBracket assembly to mount packing reservoir to pumpQuick-set disk to allow full control of the packing process through a computerTubing, cables and other necessary fittings for connectionsWith 5 mL/min, 24 mL/min, and 100 mL/min versions, the CP Class will meet most Liquid Chromatography Column packing and process needs.
-
product
Automatic Oil Interfacial Tension Tester
HITT
Hention Electrical Equipment Co., Ltd.
The HITT Automatic Interfacial Tension Tester is designed and made as per GB/T6541 “Test Methods for Interfacial Tension of Petroleum Products between Oils and Water (Ring Methods)”. It is suitable to determine interfacial tension between mineral oils and water under non-equilibrium conditions (Liquid-liquid interface). It can also be used to determine surface tension of various liquids (liquid-gas interface).
-
product
Ultrasonic Flow Meters
Omega ultrasonic flow meters are ideal for liquid flow measurement as a permanently installed meter, a temporarily installed meter, or as a portable flow verification device.
-
product
Automated Liquid Handling System
FlowCam®ALH
Yokogawa Fluid Imaging Technologies, Inc.
The FlowCam® ALH - Automated Liquid Handling system from Fluid Imaging Technologies integrates with the FlowCam® 8100 for uninterrupted processing of samples.
-
product
Proportional Valves
If your control needs go beyond simple on/off control, Omega offers valves for simple proportional control of liquids and gases.
-
product
Single Channel High Voltage Linear Amplifier
F20A
The F20A is a general purpose broadband linear amplifier having a fixed amplification of 20 times and capable of bipolar high voltage output of ±150V. Any functiongenerator or arbitrary waveform generatoror any othe signal source with amplitude up to ±10 V can be used as an input device. The amplifier's output is linear from DC up to megahertz range. It can be used in a wide range of applications, for example to drive piezo actuators, MEMS, OLEDs, liquid crystals, etc.
-
product
Supporting Micro Flowrate Range Liquid Chromatography Mass Spectrometry System
Nexera Mikros
Improvement in the sensitivity of an LC/MS/MS method can generally be achieved by reducing the analytical scale of the analysis. However, reducing the analytical scale significantly to nano-flow reduces the throughput, stability, and robustness as a trade-off for greater sensitivity. Nexera Mikros, a Shimadzu microflow LC/MS system, offers a balanced solution to increased sensitivity with less compromise to throughput and robustness, using flow rates from 1 to 500 μL/min and column I.D. from 0.1 to 1 mm. It achieves stable and sensitive quantitative analysis through robust performance of microflow solvent delivery, optimized ion source design, the unique UF-Link column connection, and system variety that supports a wide range of applications.
-
product
Liquid Chromatography
Shimadzu HPLC systems demonstrate high reliability, with outstanding performance, such as ultra-low carryover and exceptional area reproducibility, and superior data quality. In addition, they are carefully designed for broad applicability and easy operation.
-
product
Flow Measurement
HighReach Measuring & Controlling System Co.,Ltd
Involves using flow meters that measure the flow rate of steam, liquid, or gas flowing through a pipe.
-
product
Temperature Probe
*For surface and air/gas temperature measurement*Not suitable for liquids*Measurement range: -40°F to 399°F (-40°C to 204°C)*Probe length: 39.4 IN ±0.2IN (1 m ±5 mm)*Type K thermocouple*Lifetime Limited Warranty
-
product
Liquid Analyzers
Teledyne Analytical Instruments
Liquid Analyzers by Teledyne Analytical Instruments
-
product
Professional Spectral Colourimeter
LICO 690
This is a high performance instrument for professional colour measurements of clear, transparent liquids with reference beam technology. Exact colour calculations which conform to DIN, ISO & ASTM standards also AOCS Methods, and iodine, colour values, Hazen or Gardner as well as CIE-L*a*b*.
-
product
Dielectric Assessment Kit
DAK
Schmid & Partner Engineering AG
The Dielectric Assessment Kit (DAK) is ideal for all applications where high-precision dielectric parameter measurements (permittivity, conductivity, loss tangent) are required, including applications in the electronic, chemical, food, and medical industries. The dielectric probes are designed for fast, precise, non-destructive, and user-friendly measurements of liquids, solids and semi-solids over the 10 MHz – 67 GHz frequency range.
-
product
Head-separated Dual Display Digital Pressure Sensor [For Gas & Liquid]
DPC-L100 / DPH-L100
Panasonic Industrial Devices Sales Company of America
Single-Axis Type Digital Pressure Sensor With Optional Dual 3-Color Display
-
product
Flat Carbon Sensor Conductivity meter
HE-960LF / FS-09F-1/2
It is effective to keep the dilution of Slurry constant. Maintaining an appropriate conductivity value contributes to process stability in the wafer polishing process. Even highly viscous sample liquids such as CMP Slurry can be measured without problems because they use a sensor structure that reduces the risk of the sample liquid sticking to the electrodes. In addition, the sensor is made of a wetted material with excellent chemical resistance, which meets the cleanliness requirements of semiconductor processes. In addition to the above, it can also be used for introduction at the semiconductor process development stage and conductivity control of special chemicals.
-
product
RF POWER AMPLIFIERS
BLWA Series
A) RF-Sample Ports I) 3x 208 V AC / 60 HzB) External Dual Directional Coupler L) LAN Remote ControlC) IEEE-488.2 GPIB Remote Control S) Internal RF Switching UnitD) Front Panel RF Connectors R) RS-232C Remote ControlE) RF Power Indication (digital) U) USB Remote ControlF) Gain Adjustment W) Liquid CoolingH) DC Supply X) External Control of other Amplifiers
-
product
Oil Tan Delta Test Set
The Oil Tan Delta (OTD) is a laboratory instrument, which measures the Tan Delta, Resistivity and Relative Permittivity of insulating liquids. These tests give a wider picture of the overall quality of the insulating oil, and will indicate if there is any contamination. Megger has developed features of the OTD to ensure that productivity levels within laboratories are maximised. OTD test sets are supplied with sixteen standard test sequences pre-installed, to support a set of international standards.
-
product
Semi-Automatic Isoperibol Calorimeter
AC600
Developed to measure the calorific content of solid and liquid fuels, the LECO AC600 semi-automatic isoperibol calorimeter sets the standard for future calorimetry instruments. Its semi-automated operation, combined with the use of thermodynamic TruSpeed®, obtains a rapid analysis of calorific content and increased instrument throughput without sacrificing accuracy or instrument precision. A new, ergonomically-designed, lightweight combustion vessel assures ease of operation while greatly reducing operator strain.
-
product
Rotary Viscometer
NDJ-1
Viscometer is used to measure viscosity resistance and absolute viscosity of fluids, including liquid, oil, food, medicines, adhesive, etc.measuring range: 1-1x10 5 mPa.sError: 5%
