Filter Results By:
Products
Applications
Manufacturers
Water
llquid state of H2O. Also known as: H2O
See Also: Water Quality, Water Meters, H2O, Wastewater, Underwater, Water Spray, Water Leak, Water Flow, Sea, Subsea, ADCP, Hydrogen, Oxygen, River, Ocean, Farm, Aquarium, ICE
-
product
Water Meters
Conductivity meters are used to analyze the conductivity of a substance, usually reported as an inverse function of resistivity. ‘Resistivity’ is always measured in ohms/cm. ‘Conductivity’ is measured in mhos/cm.
-
product
SUNTEST Family
Atlas Material Testing Solutions
SUNTEST instruments are compact material test chambers for accelerated lightfastness and weathering testing based on filtered xenon lamp technology. All SUNTEST chambers offer a horizontal test plane which is particularly useful for testing 3-D specimens. Lightfastness testing aims at testing a material under solar radiation and temperature only – Weathering testing adds water and moisture to the test.
-
product
Multiparameter Water Quality Probe
Model GEO-AQUpro
Up to 11 sensors (9 + temperature and pH ref) from the following list: Temperature, Optical Dissolved Oxygen, Specific Conductance, Salinity, Total Dissolved Solids (TDS), pH, ORP, Depth, Turbidity, Chlorophyll a, Rhodamine, Blue-Green Algae, CDOM / FDOM, Optical Brighteners, Tryptophan, Fluorescein, Refined oil, Crude oil, Ammonium, Nitrate, Chloride, Sodium, Total Dissolved Gas (TDG), up to 5 User Configurable Parameters (calculated e.g. TSS).
-
-
product
Ancillary Test Cell Products
In addition to our innovative and industry leading AccuDyne AC Dynamometers and DynoLAB Test Automation Systems, SAKOR fully integrates a complete range of ancillary products and subsystems necessary for an advanced test cell. Examples include:*Combustion air consumption measurement and conditioning subsystems*Exhaust handling systems*Fuel consumption measurement and conditioning subsystems*Coolant and oil conditioning systems*Throttle actuators*Spark/Fuel controls*Combustion analysis systems*Complete exhaust emissions analysis systems (per 40 CFR 1065 regulations)*Sound attenuating (up to STC 52) test cell enclosures with several fire suppression options*Process water evaporative cooling tower
-
product
GC Sample Prep & Sample Introduction
For Gas Chromatography Preparation & Introduction, Teledyne LABS’ brand offers Purge & Trap instruments to prepare samples for separation. P&T is routinely applied to detect volatile organic compounds (VOCs) down to sub-ppb levels in soil and water, and as a step in determining outdoor and indoor air quality. The arrival of microprocessor-driven systems allows the concentrator to be more precise and automated, giving the operator more time for other projects. All Teledyne LABS P&T instruments satisfy U.S. Environmental Protection Agency method guidelines.
-
product
Auto Water Vapour Permeability Tester
TF165B
TESTEX Testing Equipment Systems Ltd.
Water Vapour Permeability Tester, also called Water Vapor Transmission Rate Tester (WVTR Tester) is to determine the water vapor permeability of various textile and garment fabrics, coating fabric, composite, sportswear, and industrial fabrics. This tester complies with ASTM E96, GB/T 12704, JIS L1099, etc.
-
product
IEC60529 IPX5/6 Water Jet Nozzle
Shenzhen Chuangxin Instruments Co., Ltd.
IEC60529 IPX5/6 Water Jet Nozzle is designed according to the requirements of IPX5 and IPX6 code of GB4208 and IEC60529 standard. IEC60529 IPX5/6 Water Jet Nozzle is used to test the waterproof performance of the appliance and electronic. The IEC60529 IPX5/6 Water Jet Nozzle consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The interchangeable nozzles assemble easily to the jet handle. The nozzles are made from stainless steel.
-
product
Panel-mount Type Resistivity Meter (Four-Wire Transmission)
HE-480R
HE-480R connects resistivity sensor(ERF sereies) and measures resistivity and temperature in the sample water.The feature is the high-precision temperature compensation function.Its high-performance temperature compensation makes it ideal for sequential monitoring of ultra-pure water used in manufacturing processes in the semiconductor field, and many other fields, including the areas of electrical goods, foods and medicines.
-
product
Multibeam Echosounder with Built-Ins - Shallow Water
SeaBat T20-R
The SeaBat T20-R is a new addition to the world-leading SeaBat T-series platform engineered from the ground up to evolve with your business.Combined with a Rack-mounted Sonar Processor (RSP), SeaBat T20-R provides uncompromising survey data in a highly compact package designed for small vessel use.
-
product
Wireless Soil Monitoring Network
AquaMon
Reduces Water Costs While Maintaining or Improving Crop. Yields Reduces Electrical Costs by Minimizing Pumping Requirements. Reduces ongoing Operating Costs by Eliminating Manual Data Retrieval. Adapts to Multiple Soil Types, Terrain Variations and Micro-climates.
-
product
Special Test Kits
Application specific kits are available for many parameters including Arsenic, Water in Oil, Sulfate, Glycol and others. These kits use different methods, such as test strips, turbidity, and visual color changes.
-
product
Water Aluminum Content Analyzer
Aztec AW631
The Aztec 600 aluminium analyzer provides reliable and accurate measurement of residual aluminium to improve drinking water quality and optimise chemical usage.
-
product
Colorimeters
Hach has refined the colorimeter technology into effective and accurate hand held solutions that support your testing needs. Whether you are looking for a single parameter testing device, or something that supports up to 90 of the most preprogrammed water testing methods, Hach has a solution that will support your needs. All solutions are light weight and built to go anywhere.
-
product
Stability Test Chamber
Wewon Environmental Chambers Co, Ltd.
Test Instrument to simulate effects of weathering conditions, e.g. UV light exposure and water exposure, on samples to conveniently predict the relative durability of a sample, e.g. paint, surface coatings, plastic and related materials.
-
product
Cold Water Flow Meters
SY-Flow-Beta
This range of Flow Beta Cold Water Flow Meters is available in 6 pipe diameter sizes/ flow rate ranges. These inferential multi-jet type meters have a direct reading register and are suitable for drinking water (75/33/EEC)/WRc/WRAS MID Approved R80 T50.
-
product
Field-installation Type Simplified Fluoride Ion Concentration Meter(Two-Wire Transmission)
HC-300F
HC-300F is connected to a fluoride ion electrode (1009) to detect free fluoride ions in the sample water.(Total fluorine is not detected.) It is suitable for fluoride ion monitoring in effluent from factories, e.g., those of semiconductor FPD and glass manufacturers.
-
product
Geotextile Water Flow Capacity Tester
TG050
TESTEX Testing Equipment Systems Ltd.
The flow of water within the plane of a geotextile or geotextile-related product is measured under varying normal compressive stresses, with typical hydraulic gradients and with defined contact surfaces.
-
product
COD Analyzer
LD-LCDA-A10
COD AnalyzerLD-LCDA-A10is a benchtop unit which measures COD of the water sample in the range of 0 to 1500 mg/L by dichromate colorimetric method. It comes along with digester, dispelling 21 samples simultaneously by sealing reflux method within digesting time range of 0 to 120 min. Functions with 200 data storage capacity and two point calibration (zero and full scale calibration). Used in water quality monitoring and environmental protection, petroleum, chemical industry and heath etc.
-
product
Oil In Water/Soil Analyzer
InfraCal 2 ATR-SP
The InfraCal Model ATR-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels when using hexane, pentane or Vertrel MCA as the extracting solvent. Measurement data obtained with this analyzer will correlate to EPA Method 1664 as both procedures are based on evaporation techniques and measuring the residual oil and grease. The analyzer is equipped with a built-in cubic zirconia horizontal attenuated total reflection (HATR) stainless steel sample stage. The InfraCal 2 ATR-SP is a direct replacement for the original InfraCal HATR-T2 used worldwide for the determination of TOG/TPH in water and soil.
-
product
Dynamic Footwear Water Penetration Tester
UI-FT11
Dynamic Footwear Water Penetration Tester is used to test all kinds of finished shoe water resistance ability in flexing condition.
-
product
Industrial IP69K Stainless Steel Panel PCs With 11th Gen Intel® Core™ Processor
Titan2
- 11th Gen Intel® Core™ i5/i3 BGA type processor- 15.6”/21.5”/23.8” FHD with projected capacitive touchscreen- Full IP69K rating for dust and water ingress- Corrosion-resistant 304 stainless steel enclosure (316 for Option)- All M12 type connectors suite for harsh environments- Optional for optical bonding and high brightness (1000 nits)- Standard VESA, Yoke/Pipe mount (optional)
-
product
Autonomous Data Collector
DCX-25 PVDF
KELLER AG für Druckmesstechnik
The DCX-25 PVDF is an autonomous, battery powered instrument designed to record water depth (pressure) and temperature over long periods. The housing is made of polyvinylidene fluoride and the sensing diaphragm is available in either Hastelloy C-276 or titanium 6AL-4V. This combination of wetted materials ensures compatibility with even the most aggressive media.
-
product
CTDs: Profiling
Profiling CTDs make continuous measurements as they travel through water. When lowered over the side of a ship or integrated with an autonomous vehicle, they map a vertical column of water's characteristics. Compared to moored CTDs, profiling CTDs account for dynamic errors introduced by moving through water and sample rapidly to generate a high-resolution dataset over a short period of time. Sea-Bird Scientific profiling CTDs are:*Designed to perform under unique dynamic conditions found on moving platforms.*Pumped and ducted for constant flow to match temperature and conductivity response.*Plumbed so measurements are made on the same sample of water with a predictable delay and predictable flow effects.*Built with a rugged design for shipboard and autonomous deployments.
-
product
Anti-Condensation Heaters
Anti-Condensation Space Heaters are designed to maintain the temperature of an electrical enclosure. Anti-Condensation Heaters are used for elimination of water vapor contained inside the enclosures. They also provide frost protection by keeping the internal temperature of electrical enclosure above the freezing temperature. The Anti-Condensation Space (Panel) Heaters prevent condensation through convection.
-
product
Sound, Light & Moisture Tester
Make safety compliance checks or perform acoustic analysis using a sound meter. Monitor and optimize light levels, reduce the energy burden of buildings by significantly increasing the efficiency of the lighting system with a light meter. Or check the moisture content of building materials for water damage or harmful mold growth, using a moisture meter.
-
product
Mini Connector
HMA-M
The OPTOKON HMA-M connector series, a mini size „Expanded Beam“ connector is designed for connection of the nodes of harsh environmental network by the help of cables with optical fibers. The used expanded beam technology preservers all advantages of signals transmission through the optical lines in field harsh environmental conditions. Additionally to ruggedized optical networks the HMA-M is suited for a vast array of applications, like heavy industry connections, petrochemical application, broadcasting temporary optical lines. The innovative designs ensure its ability for deployment in the toughest environments where high performance and total reliability are critical. Benefiting from expanded beam technology the precision optical alignment system creates immunity from water, mud, dust oil and other contaminants. The HMA-M Hermaphroditic coupling eliminates the need for adaptors and male and female mating halves. Hermaphroditic housings allow for rapid deployment, creating low loss Singlemode and Multimode daisy chained links in a variety of planforms ranging from simplex fiber to a four fibers. The OPTOKON HMA-M is ideally suited for environmental extremities where low maintenance and quick repairability is necessary.
-
product
Test Strips
High-quality Hach chemistry in an easy-to-use test strip. Simply dip the strip into the sample and compare the color to the colors on the bottle to determine the reading. The test strips are accurate, portable and inexpensive. Applications include potable water, waste water, swimming pools and spas, industrial process applications and more. Available parameters include chlorine, nitrate and nitrite, water hardness, alkalinity, chloride, ammonium and more. Hach offers a high-quality 5-in-1 test strip that measures free chlorine, total chlorine, hardness, alkalinity, and pH—all in one strip.
-
product
Flow Control Set Up Using PID Controller
ULP-25O & ULP-25T
Unitech Scales And Measurements Pvt. Ltd
Flow Control Setup Comprises of a Orifice with DPT to measure flow Rate. The flow of water is controlled by Control Valve with pneumatic actuator. I to P converter is provided to control the actuator. Rotameter is provided to measure actual flow rate. The system is mounted on a table top model with all necessary piping.
-
product
In-Line Fat Measurement
FATSCAN
TOMRA’s new FatScan fat analyzer allows for the continuous analysis of meat to precisely determine its fat content. This functional and compact machine can be easily integrated in production lines and is specifically designed to assist smaller meat processors in delivering a consistent and uniform product. The innovative FatScan can analyse both fresh and frozen meat and it measures fat in real-time, delivering highly accurate and consistent results. The hygienic and robust analyser penetrates deeply into the meat, and measures across the full 500 mm width of its conveyor belt. The design is open, so all surfaces can be visually inspected and sanitized, using high pressure water. The FatScan is able to analyse up to 7 tons of meat per hour, making it an ideal choice for small and medium size processors. This, along with the consistent end product quality and savings generated through reduced lean give-away, helps you to drive up your profits.
