VECTOR Electronics and Technology, Inc.
We offer the shortest lead-times in the electronics industry with extensive factory-stock selection of 19" rack mount systems packaging and prototyping products. We have a growing number of aerospace, military and commercial OEM accounts in addition to national distribution channels for our Vectorbord® products.
- ( 800 ) 423 5659
( 818 ) 985 8208 - ( 818 ) 985 7708
- inquire@vectorelect.com
- 11115 Vanowen St
North Hollywood, CA 91605
United States of America
-
Product
Backplane
VME64/VME64x
-
VECTOR Electronics and Technology, Inc.
Vector offers a comprehensive range of VMEbus backplanes from 2 to 21 slots. VME J1/J2 and VME64x J1/J2/P0 backplanes per ANSI/VITA 1.1-1997. Monolithic 6U high VME64 and VME64x backplanes are fully RoHS compliant and perform to ANSI/VITA 1.7-2003 (R2009) increased current level for VME (96 pin) and VME64x (160 pin) DIN/IEC connectors.
-
Product
Extrusion Rail
5250268-84
-
VECTOR Electronics and Technology, Inc.
Fits into extrusion rail to attach front panels or backplanes.HP pitch pattern of holes for precise installation offront panels or backplane.
-
Product
Circbord
8019-1
-
VECTOR Electronics and Technology, Inc.
Single sided board, circuit pattern one side only, holes not plated thru.Ideal for common busses, signal line running longer distances, for hard wire of test circuits or discrete components. Tracks run close to board edges. 3U X 160mm Eurocard size will fit into 3U DIN Metric subrack.
-
Product
Circbord
8004
-
VECTOR Electronics and Technology, Inc.
Single sided prototyping area with overall Ground Plane. 0.080” diameter clearance around each hole. Plane surfaces solder coated for user convenience. I/O area with square solder pads for connector mounting. No circuit pattern on reverse side.
-
Product
PCI Extender
3690-34
-
VECTOR Electronics and Technology, Inc.
3.3V or 5V PCI Extender card uses universal pattern for 32/64 bits in the short card size. Extender is design for use in developing and troubleshooting of PCI local bus 32 and 64 bits cards.
-
Product
Extender
3690-16
-
VECTOR Electronics and Technology, Inc.
Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.
-
Product
IBM PC-XT, Vectorbord Plugbord
4613-3
-
VECTOR Electronics and Technology, Inc.
62 contacts (31 each side) on 0.100" centers. Pad per hole. Voltage and ground buses around board perimeter. I/O mounting area for 37-pin D-sub and ribbon cable connectors. Mounting bracket and hardware kit included (P/N HD36B).
-
Product
Circbord
8015-1
-
VECTOR Electronics and Technology, Inc.
Pad-Per-Hole pattern one side only.0.080” diameter isolated solder pad around each hole one side only.Unrestricted component placement and extended area for high density applications.
-
Product
Eurocard Plugbord
E160-3U-1
-
VECTOR Electronics and Technology, Inc.
3U x 160mm Eurocard size for 96-pin DIN connector. Pad-Per-Hole both sides. Voltage and ground buses around board perimeter on both sides. Pad and bus surfaces solder coated for user convenience. For solder, Wire-Wrap or mixed wiring methods.Row and column legends provided.
-
Product
Circbord
8030
-
VECTOR Electronics and Technology, Inc.
Pad-per hole pattern both sides. 0.062" diameter holes plated thru. 0.100" diameter isolated solder pad around each hole on both sides. 0.125" diameter corner mounting holes. Unrestricted component placement and extended area for high density applications..
-
Product
Extrusion Rail
1404-0016-84
-
VECTOR Electronics and Technology, Inc.
Fits into extrusion rails to attach front panels or backplanes.HP pitch pattern of holes for precise installation offront panels or backplane.
-
Product
Uncommitted Extender
UEC220-6U
-
VECTOR Electronics and Technology, Inc.
Two Uncommitted Extenders UEC220-3U attached on top & bottom with mending plate to create UEC220-6U Extender
-
Product
EMC Subracks
101.1/10/11
-
VECTOR Electronics and Technology, Inc.
VectorPak™ EMC Rugged subracks for heavy duty applications where a high resistance to shock and vibration is required. Its features include heavy two-screw fixing extrusions, 2.5mm thick side panels / rack flanges and conductive finish throughout.
-
Product
Circbord
8029
-
VECTOR Electronics and Technology, Inc.
Pad-per hole pattern both sides. 0.042" diameter holes plated thru. 0.080" diameter isolated solder pad around each hole on both sides. 0.125" diameter corner mounting holes. Unrestricted component placement and extended area for high density applications..
-
Product
Extender Boards
-
VECTOR Electronics and Technology, Inc.
Extender boards are designed to bring a circuit card completely out of a card cage or enclosure so that it can be tested or debugged. This provides access to both sides of the test board.
