Product

I/Q Signal Generation for Digital Radio Standards

WinIQSIM2

-

Rohde & Schwarz GmbH & Co. KG

WinIQSIM2 - Rohde & Schwarz GmbH & Co. KG

R&S®WinIQSIM2™ was especially developed to easily generate digitally modulated signals on a PC. The graphical user interface allows intuitive operation by offering a convenient way to create standard-conforming waveforms for many configurable digital standards and to generate multicarrier signals and multisegment waveforms. With these capabilities, R&S®WinIQSIM2™ covers a wide range of applications.

Product

Standard Voltage 78 Pin D-Type Cables - Calibration Cables For Pickering Products

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The cable assemblies below are suitable for use with Pickering precision resistor cards and modules that utilize 78-pin D-type calibration port connector.

Product

Xytronic Three-Phase Reference Standard +/- 0.04%, +/- 0.02%, +/- 0.01%

RADIAN RX-30, RX-31 and RX-33

-

Radian Research, Inc.

RADIAN RX-30, RX-31 and RX-33 - Radian Research, Inc.

Radian Research is committed to providing our customers with leading innovative and technologically superior products, while maintaining metrology capability in power and energy measurement that is surpassed by none. Our engineers drew on the expertise and knowledge we acquired for our industry-leading legacy RM (Metronic) and RD (Dytronic) reference standards to develop the RX (Xytronic), the ultimate in power and energy measurement technology perfection.

Product

Standard M18 Cylindrical Photoelectric Sensors

-

Contrinex AG

Contrinex AG

Contrinex Standard M18 Cylindrical Photoelectric Sensors

Product

Standard M12 Cylindrical Photoelectric Sensors

-

Contrinex AG

Contrinex AG

Contrinex Standard M12 Cylindrical Photoelectric Sensors

Product

Standard VXI Module Shield Kits With Address Switch Opening

-

ICS Electronics

ICS Electronics

* Single-slot kit fits all VXI-1 Revision 1.0 to Revision 3.0 chassis.* Clamshell design fits C-size modules with 96-pin connectors.* Side shields include connector shrouds for maximum shielding.* RFI limiting, air vent slots along top and bottom edges for good air circulation thru the module.* Extruded front panel is bend resistant.* Address switch opening on component side shield.* Complimentary layout support includes PCB design template and CAD layout files.

Product

Calibrated Leak Standards

-

LeakMaster

LeakMaster

LeakMaster is a leader in the industry when it comes to the manufacturing of calibrated leak standards  (calibrated leak orifices). Each leak standard is meticulously manufactured to a specific leak or flow rate at a predetermined pressure. The purpose of each leak standard is to teach, or calibrate a leak test program, and allow the leak test instrument to memorize the characteristics of a leaking part. These leaks are also introduced into production parts to simulate a “leaking or failed” part condition. LeakMaster supplies a calibrated leak standard with every leak test instrument, and provides recertification services for all of their leak standards

Product

2210A & 2211A Quartz Frequency Standards

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

The ptf 2210A Quartz Frequency Standard has been designed to provide a highly stable and spectrally pure frequency reference for applications requiring the ultimate in short term frequency performance.The instrument contains a double oven controlled stress compensated (SC cut) quartz crystal oscillator (OCXO) to give the ultimate in performance.Ideal for laboratory or system use, the unit provides good stability performance at lower cost and with improved phase noise.

Product

Standard Parameters for Analysis

C-Cell Mono

-

Calibre

C-Cell Mono - Calibre

C-Cell Mono is the original system and comes with the standard parameters for analysis. C-Cell Mono takes 1 image of the sample to produce analytical results such as crust wall thickness, size, shape and location. C-Cell Mono is the entry level model of the C-Cell range and offers all the basic image analysis needs for a baker.

Product

Standard Voltage 37 Pin D-Type Cables - Connector to Connector for Pickering

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to connector cable assemblies below are suitable to use with Pickering cards and modules that utilize a standard voltage 37-pin D-type connector.

Product

Standard Gain Horn Antenna

SAS-586

-

A.H. Systems, Inc.

SAS-586 - A.H. Systems, Inc.

This Standard Gain Horn Antenna will provide reliable, repeatable measurements. An ideal solution and a standard workhorse of any EMC test house for compliance testing. Features: 12.4 GHz to 18 GHz, Individually Calibrated, FCC, MIL-STD, VDE and TEMPEST Testing.

Product

AC Calibration Standard

1U647-001

-

Sigma Tek, Inc.

1U647-001 - Sigma Tek, Inc.

The 1U647-001 is a low cost calibration standard used to determine if a 1U632-100 or a 1U663-100 DMU requires factory calibration. Its portability makes it ideal for field-testing. The standard generates signals that simulate the aircraft’s resolvers, rotary variable transformers (RVTs), and linear variable displacement transformers (LVDTs). The unit also generates a pulse width modulated (PWM) signal, and routes the output of an ARINC 429 source to the different DMU input channels. The calibration standard connects directly to the DMU and replaces the output signals of an active extender card. Discrete switch settings simplify testing. The unit is housed in a rugged aluminum case.

Product

Standard Gain Horns

-

Marki Microwave

Marki Microwave

Standard gain horns can be used to experimentally determine the gain of other antennas by using the substitution method. The standard gain horn and the antenna under test are alternately connected to a well matched detector system in order to compare their relative power levels. The power level difference is then added to the appropriate level of the calibration curve to determine the absolute gain of the antenna under test.View more Standard Gain Horn Antennas

Product

PathWave BenchVue AC Source Avionics Standard Test Software

BV0028B

-

Keysight Technologies

BV0028B - Keysight Technologies

Control your AC source and accelerate pre-compliance testing as per the avionics and military-standard requirements at ease.

Product

Standard Class AAA Solar Simulator

TriSOL TSS

-

OAI

TriSOL TSS - OAI

Essential for testing virtually any material or product that is exposed to sunlight for long or short periods of time, OAI’s low-cost, Standard Solar Simulators deliver highly collimated, uniform light. Depending on configuration, output on these Solar Simulators is rated at 350W -5,000W.These Class AAA Solar Simulators feature OAI’s Advanced Uniform Beam Optics and are available with a choice of air mass filters to reproduce a wide range of solar spectra. For added flexibility, OAI’s proven lens and collimating mirror technology allows for a variety of exposure area sizes. A Class AAA Solar Simulator is an essential tool for manufacturing as well as R&D; it is indispensable in test labs, industry, and in universities. OAI Standard Solar Simulators are used in photobiology, biomedical, solar cell testing, cosmetic testing, and paints & coatings analysis. Based on 35+ years of proven UV light technology, OAI Solar Simulator Systems deliver repeatable, reliable, constant output, and measurement uniformity.

Product

Full-Featured Open Source Free Implementation for the Object Management Group (OMG) Data Distribution Service for Real-Time Systems Standard

DDS Community

-

ADLINK Technology Inc.

DDS Community - ADLINK Technology Inc.

The DDS Community Edition is a full-featured open source, genuinely free implementation of the Object Management Group (OMG) Data Distribution Service for Real-Time Systems standard. Full-featured Apache license version 2.0 open source Data Distribution Service (DDS) implementation.

Product

Helmholtz Coils (Field Standards)

-

Lake Shore Cryotronics, Inc.

Lake Shore Cryotronics, Inc.

Lake Shore offers four Helmholtz coils for field standards: 2.5 in, 6 in, and 12 in diameter single axis, and the MX-2X-10 double axis coil. Standard field coil (field generation). Field strengths from ˜12 G to ˜30 G. Field accuracy of 0.5%. Field uniformity of 0.5%*. Single axis configuration with 2.5 in, 6 in, and 12 in diameter coils.