Product

Linear Motion Tandem Transducer

-

Columbia Research Laboratories

Columbia Research Laboratories

The Columbia Model LMT-50 is a unitized rugged package consisting of tandem linear variable differential transformers (LVDT's) with probe assembly. The LMT-50 is designed so that the likelihood of a single failure affecting both output signals is extremely improbable. The model LMT-50 offers flight proven performance, even in the most severe environments.

Product

RF Voltage Probe

P-20 Series

-

Auburn Technology

P-20 Series - Auburn Technology

The P-20A is a PASSIVE 10:1 RF VOLTAGE PROBE with a 50 Volt DC BLOCK built in. It has been designed to allow users of RF test equipment to use standard signal tracing techniques. The P-20A makes it possible to conveniently and accurately monitor or inject signals up to 3 GHz into RF circuits without significantly loading or detuning them.

Product

2.0J Impact Hammer

CX-T20

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-T20 - Shenzhen Chuangxin Instruments Co., Ltd.

Required by many Standards to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the product is examined with accessibility probes to determine access to shock, energy, and injury hazards. Built in exact accordance to IEC, EN, UL, CSA and other international Standards.

Product

Digital Inspector

DI-2000

-

Lightel Technologies, Inc.

DI-2000 - Lightel Technologies, Inc.

Many modern network issues can be traced to contaminated or damaged fiber optic connector endfaces. Lightel’s DI inspection probe series provides ergonomic, easy-to-use, and versatile inspection of the endfaces for fiber optic male and female, single and multi-channel connectors.

Product

Building Inspection Kit

MR160-KIT2

-

Teledyne FLIR

MR160-KIT2 - Teledyne FLIR

Troubleshoot moisture and building problems wherever you go with the FLIR MR160-KIT2. This kit features the MR160, a moisture meter with IGM™ to quickly target problem areas, as well as the C2, a full-featured, pocket-sized thermal camera designed for a wide range of building and electrical applications. The MR160’s integrated pinless sensor and external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The kit also includes the MR06 wall cavity probe for even greater functionality.

Product

High Performance Liquid Chromatograph Triple Quadrupole Mass Spectrometer

LCMS-8045

-

Shimadzu Corp.

LCMS-8045 - Shimadzu Corp.

Equipped with a heated ESI probe, the LCMS-8045 has the highest sensitivity in its class. The heated ESI probe, high-temperature heating block, desolvation line (DL) and drying gas, all act to promote desolvation and prevent contamination due to the penetration of liquid droplets into the MS unit. This improves the robustness, so reliable and high-accuracy data can be obtained over the long term. The LCMS-8045 also achieves the world's fastest scan speed (30,000 u/sec) and polarity switching speed (5 msec). These enable ultra-high-speed, high-sensitivity analysis. The excellent cost performance of this system is demonstrated in food safety, environmental analysis, and other quantitative analyses, it can be upgraded to the LCMS-8060.

Product

MP175 ICT Probes

-

Merica Technology Ltd

Merica Technology Ltd

MP175 Series ICT Probes

Product

Adapter/Stainless Steel

WADP-QSMSF-01

-

Warison Technology inc

WADP-QSMSF-01 - Warison Technology inc

Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.

Product

Needle Microprobe

MT-23/3HT

-

Physitemp Instruments

MT-23/3HT - Physitemp Instruments

Fast-response 23 gauge needle probe, (needle length is 3 cm) for instant readings in tissue, semisolids, liquids. Also for very small specimens, powders and materials. Needle tip is sealed to ensure only stainless steel contacts specimen. Max. temp. 200°C. 5 ft. lead. Smallest microprobes give fastest reading. Short probes are easier to insert and last longer. Type #'s indicate needle gauge and needle length in cm.

Product

Combined Temperature – RH Probe

HP475ACR

-

Senseca

HP475ACR - Senseca

Relative humidity and Pt100 temperature combined probe, with SICRAM module.

Product

Sensors

-

Ahloborn

Ahloborn

A wide range of probes, sensors and signals is available for ALMEMO® data loggers and measuring instruments, which are connected via intelligent connectors with integrated data carrier. For common measuring tasks the connectors are configured at the factory and the measuring device automatically recognizes the connected sensor. All sensors can be calibrated, scaled and provided with a unique designation via the intelligent connectors. The programming always remains with the corresponding sensor, so that it can be connected to any input on the measuring instrument. Inaccuracies of a sensor can be corrected in the connector, thus turning simple sensors into precise transducers.

Product

Centesimal Thermometer Pt100

HD2107.1

-

Senseca

HD2107.1 - Senseca

Centesimal thermometer in the range ±199.99 °C, decimal outside this range, one input for Pt100 probes with SICRAM module measuring range -200 °C +650 °C.

Product

Combination Exhaust Tester for Petrol- and Diesel- Powered Vehicles with Innovative Condensate Separation

MET 6.3 | VP 135213

-

Maschinenbau Haldenwang GmbH & Co. KG.

MET 6.3 | VP 135213 - Maschinenbau Haldenwang GmbH & Co. KG.

The combination tester is designed for the measurement of petrol- and diesel-powered vehicles. The MET 6.3 stands out for its innovative condensate separation thanks to an active water separator. In addition, low weight, compact design and short warm-up time ensure easy handling. Part of the equipment is a 2 m (optional 4 m) long probe for both engine types.

Product

24V Heavy Duty Circuit Tester

CT24

-

Matco Tools

CT24 - Matco Tools

Insulated probe with shrink tubing to prevent shorting the side of the probe to other components.

Product

EMC Probes

-

Beehive Electronics LLC

Beehive Electronics LLC

The Beehive Electronics 100 series EMC probes allow the accurate measurement of magnetic and electric fields. They are useful for EMC troubleshooting, field strength measurement, and troubleshooting of RF circuits.

Product

The Field Logger

-

ACM Instruments

ACM Instruments

The Field Logger is a stand-alone data logger which is capable of recording potential vs. time and LPR vs. time data. The instrument is battery powered and records data onto an attached SD memory card. The instrument is entirely contained within a waterproof (IP67), tough polycarbonate enclosure (23x19x11cm), with probe connection via a single high quality watertight Lemo or Amphenol connector.

Product

Ultrafast Joulemeter

-

Gentec Electro Optics, Inc.

Gentec Electro Optics, Inc.

Measure every pulse at up to 200 kHz with MACH 6. Measure with 12-bit digital accuracy and capture up to 4 million pulses in real time. Our MACH 6 Joulemeter is the only instrument in the world that performs at this speed, and with this precision. It is designed to support our full complement of fast energy probes that include Silicon, InGaAs and Pyroelectric Detectors. Measure from pJ to mJ and from 0.35 to 2.5 m. Using the M6-Si detector and the M5-UC-QED accessory, you can make relative measurements at 266 nm.

Product

Manual Fixture Kit With Changeable Cassette, Max number of probes (2N) 500 units, Max UUT 197 x 114 mm (wxd)

CMK-01

-

Columbia Elektronik AB

CMK-01 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs.10 mm ESD-proof top cover with aluminum reinforcement bars.Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.