Product

Heat Exchangers RF Coaxial Loads

86500 Series

-

Coaxial Dynamics

86500 Series - Coaxial Dynamics

The 86500 Series Heat Exchangers are ideal for areas where water is limited. The loads are rugged, self-contained, easily operated, and portable units capable of dissipating up to 80 kW of RF power from DC to 800 MHz with a VSWR of 1.10:1.

Product

Loading Adjustable Drop Tester Machine

CX-DL15A

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-DL15A - Shenzhen Chuangxin Instruments Co., Ltd.

Package Impact Drop Testing Machine is used to measure the dropping impact incidence when the package in using, transportation and decorating. Labtone "1G+" project strictly ensure the accuracy. Besides precision plane drop testing, it also can undertake edge and angle test to ensure the complete performance evaluation for the package. During the products handling or transport process, there may be drop/ fall, which results in damage within the products. And this Drop Tester simulates the drop/ fall of a finished product to evaluate the damage. All the rhombohedrons, angles and faces of the products can be tested.

Product

Electronic Load Board 3U CPCI-S (air cooled)

056-377

-

ELMA Electronic, Inc.

056-377 - ELMA Electronic, Inc.

The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane.

Product

Programmable Delay Line Instrument

XS-100

-

Colby Instruments, Inc.

XS-100 - Colby Instruments, Inc.

The XS-100 is designed for those who need faster switching speeds and measurements without interruptions

Product

Precision Gram Load Cell Universal/ Tension or Compression

GSO SERIES

-

Transducer Techniques, Inc

GSO SERIES - Transducer Techniques, Inc

The GS0 Series Load Cells can be utilized in tension or compression or both with excellent compliance. The force sensing end of the anodized aluminum GS0 Series is tapped 6-32 thru for attachment possibilities for almost any application. Bonded foil strain gages at the sensing element provide for excellent stability over the suggested temperature range and ensure long term reliability. Call for application assistance.

Product

GOLDesp Load Planner

-

Tapestry Solutions

Tapestry Solutions

Provides automated load-planning capability that assists embarkation specialists in the rapid development of cargo load plans

Product

Auto Load 4 Moving Probe Tester

AL Series F4H4033AL

-

MicroCraft K.K.

AL Series F4H4033AL - MicroCraft K.K.

Medium and High Volume Production Model with Auto Loader. Max. Test Area 15.7 x 13" (400x330mm). Max. Transferable Panel Size 16.5 x 13.4" (420x340mm). Number of Probes 2 Upper, 2 Under. in. Pad Pitch *4 0.00236" (60µm). Min. Pad Size *5 0.00118" (30µm).

Product

Unclamped Inductive Load Tester

ITC55300C

-

Integrated Technology Corp.

ITC55300C - Integrated Technology Corp.

Model ITC55300C performs ruggedness testing of power MOSFETs, discretes and modules and IGBTs, discretes and modules. It also tests single and dual diodes, and forward and reverse bias of IGBTs when used with an optional ITC55-RSF Output Selector Box.

Product

Programmable Power Supplies

GENESYS+™ Series

-

TDK-Lambda Corp.

GENESYS+™ Series - TDK-Lambda Corp.

Utilizing embedded microprocessor technology to provide advanced performance and functionality, the GENESYS+™ series has the highest power density and lightest weight available for its size with a comprehensive set of user-friendly interfaces.

Product

Programmable Multi-Way Variable-Frequency AC/DC/IR Hipot Tester

-

AllWin Instrument Science and Technology Co., Ltd.

AllWin Instrument Science and Technology Co., Ltd.

20 memory,8 test procedureOver-zero start,Over-zero cut offfrequency range from 40.0 to 400.0Hz

Product

Load Testing

-

Flood IO Pty Ltd

Flood IO Pty Ltd

Load Testing, Simplified. We sort out the infrastructure, so you can spend more time testing. Tool Agnostic - We support JMeter, Gatling, Capybara and Selenium. Unfettered Testing - No limits on how you test, run as many users for as many tests, for as long as you like. Third-party Integration - Send results to Slack, Hipchat, Flowdock, or your own services using our API.

Product

Automated Tuners / Impedance Tuners / Load Pull Tuners

-

Maury Microwave Corporation

Maury Microwave Corporation

MT97x, MT98x and XT98x series automated tuners (also known as automated impedance tuners and automated load pull tuners) are precision instruments that are optimized for a broad class of in-fixture and on-wafer applications, and may be used in any automated or manual application requiring the ability to match the impedance of a microwave circuit element or to establish specific impedances at a terminal interface. The tuner design is based on the slide screw concept using the inherently broadband slab-line transmission structure. Each unit has two non-contacting probes deliver high VSWR with superb accuracy and reliability over a wide frequency range. These probes can be fully retracted leaving a low-loss, well-matched transmission line, which is a significant benefit in power related applications where two-port tuners capable of handling large amounts of power are required. As integral components of Maury Device Characterization Solutions, these PC-based tuners are controlled using Maury's family of Device Characterization Software tools, including MT930 IVCAD, MT993 ATS and the DLL-based measurement automation environment. Maury Microwave automed impedance tuners are ideal for load pull, harmonic load pull, active load pull, hybrid active load pull, noise figure, noise parameters and all automated tuner applications.

Product

S Cell Load Cell

SC-1.0

-

Dynamic Load Monitoring Ltd.

SC-1.0 - Dynamic Load Monitoring Ltd.

S Cell – 0.25t – 20t.

Product

Bolt Extensometers for Proof Load Testing

Model 3565

-

Jinan Testing Equipment IE Corporation

Model 3565 - Jinan Testing Equipment IE Corporation

The Model 3565 uses hard conical points to contact the bolt at the center of the head and at the bottom. It is fully adjustable for different length bolts ranging from 25 mm (1 inch) in length to 150 mm (6 inches) standard. Extension beams are available for longer bolts. The standard maximum measuring range is 1.25 mm (0.05 inches). Generally, on longer bolts this extensometer will be self-supported without requiring any centering marks or punch marks on the bolt. For shorter bolts these marks may be required. If the conical pins are sharp, marks are often not needed even on the shortest bolts.The extensometer has a zero adjustment screw to adjust the length between the contact pins. This is used to set the output voltage to zero, which corresponds to the correct starting position for the test. It also includes a breakaway lower arm. In the event a bolt should fail, the breakaway arm snaps free, helping to prevent damage to the extensometer. This is easily re-installed. In the event that bolt failures are likely during a test, it is recommended the user attach a cord around the upper part of the beam and tie the other end to the test frame to prevent the extensometer from falling. The conical point contacts included with the extensometer are made from tungsten carbide.The Model 3565 extensometers are strain gaged devices, making them compatible with any electronics designed for strain gaged transducers. Most often they are connected to a test machine controller. The signal conditioning electronics for the extensometer is typically included with the test machine controller or may often be added. In this case the extensometer is shipped with the proper connector and wiring to plug directly into the electronics. For systems lacking the required electronics, Epsilon can provide a variety of solutions, allowing the extensometer output to be connected to data acquisition boards, chart recorders or other equipment.

Product

Programmable Multifrequency Clock Synthesizer - 6U VPX

Model 5891

-

Mercury

Model 5891 - Mercury

- Simultaneous synthesis of up to 10 different clocks- 16 SMC clock outputs- Typical phase noise: -105 dBc/Hz @ 1 kHz offset- All clocks are phase-locked to input reference signal- Input reference frequency of 5 to 100 MHz- Eight programmable VCXOs with 32-bit tuning resolution- Output clocks of 1, 2, 4, 8, or 16 submultiples of VCXO base frequencies- Output clock frequencies between 50 and 700 MHz- Control and status over the VPX backplane

Product

Low Voltage High Current DC Electronic Load

N62400 Series

-

Next Generation Instrumental (Shanghai) T&C Tech. Co., Ltd.

N62400 Series - Next Generation Instrumental (Shanghai) T&C Tech. Co., Ltd.

N62400 series is developed based on NGI's years of experience in testing for fuel cell. It is with high accuracy, high reliability and high cost-effective. N62400 series is with high power density and elegant appearance, which is available for benchtop use or installation in 19 inch cabinet.

Product

Load Cell & Microvolt Meter

-

Laurel Electronics, Inc

Laurel Electronics, Inc

A high-sensitivity 5-digit meter for use with load cells, strain gauges and microvolt input signals where high accuracy and stability are required. Load cell operation allows 4- or 6-wire hookup and display in engineering units, such as lbs, kg or psi. Built-in excitation for up to four 350-ohm load cells in parallel.

Product

Load Cell Tester

-

Xiamen Elane Electronics Company, Ltd

Xiamen Elane Electronics Company, Ltd

Large six-digit LED display < Easy to use and small in size < Accuracy of 0.005%FS/10ppm < 2 channels CH0 : -12mV/V~+12mV/V, with resolution 0.1uV/V CH1 : -1.6mV/V~+4.8mV/V, with resolution 0.01uV/V < Four user selectable output units (N, kgf, lbf and mv/V) < Peak Hold function to capture and holding the peak value for the immediate or later reference < Clear key to clear the peak value < Presence of tare key and foot switch to zero the display (tare function) < Great for monitoring and testing load cell characteristics (repeatability, linearity, creeping, temperature drift, etc

Product

Programmable Controllers for Small Machines

Samba Series

-

Unitronics Group

Samba Series - Unitronics Group

Boost the price/profit ratio with award-winning Samba—a perfect fit for any small machine or simple project that requires a true PLC controller and a high resolution HMI color touchscreen.

Product

Programmable Switching DC Power Supply

SPS5000X Series

-

SIGLENT Technologies

SPS5000X Series - SIGLENT Technologies

The SPS5000X-Series is a programmable Switching DC Power supply series that provides a wide range of output power using single-channel and multi-channel output configurations coupled with constant power capability. The series of power supplies includes sixteen models  with voltages to 160 VDC and power to 1080 W. The SPS5000X supplies can be connected in series (2 units) or in parallel (3 units) to meet the requirements of 0~320V and 0~270A, with a maximum combined power of 3240W.

Product

Economical Load and Force Measurement

ELF

-

Tekscan, Inc.

ELF - Tekscan, Inc.

Tekscan's ELF force and load measurement system matches the market's need for an inexpensive load and force measurement system with Tekscan's ability to deliver innovative load and force measurement solutions. The system consists of data acquisition hardware, software, and FlexiForce B201 sensors.

Product

Time Domain Replication (Road Load Simulation)

-

M+P International

M+P International

The powerful graphical editor makes it easy to review and compile your field sample data for use in the test lab. The point editor, filters, velocity and displacement compensation ensure the test feasibility is evaluated at an early stage. The continuous closed-loop controller then replicates the test files with very high levels of precision. The control algorithms use a continuous coherence averaging technique to ensure a stable proactive control loop that will not only provide accurate replication but will also respond to changes in test item dynamics.

Product

Single Point Aluminium Load Cell

EST-6

-

Technopark Automation & Control

EST-6 - Technopark Automation & Control

The EST-6 is a Single Point Aluminium Load Cell suitable for use on platform scales measuring 600 x 500 mm. This load cell is available in capacities 500 kg and 1000 kg.