Current Injection
-
Product
High Current Probes (Power Electronics) HCF73211B100G300
1006321
-
The High Current Probe HCF73211B100G300 is a specialized solution tailored for power electronics applications, designed to deliver reliable connectivity under demanding conditions. This Basic Contact Probe is engineered with specific dimensional and material requirements to ensure optimal performance, even in extreme temperatures ranging from -45°C to +200°C. Its robust design incorporates high-grade materials, including a beryllium copper plunger, ensuring durability and high conductivity, which are critical for precise electrical measurements in electronic circuits.
-
Product
Multi-Stage Injection Analyzer
FJ-8000 series
-
Common rail method already is commonly known as an injection system of diesel engine now. That system enables multi-stage fuel injection by offering high injection pressure in various driving situation. Adopting the common rail system helps improving fuel consumption, reducing noise and vibration, because the system can make the fuel approximate complete combustion which suppresses PM and NOx generation. FJ-8000 series is the multi-stage injection analyzer that supports more accurate injection by measuring injection quantity, injection rate, injection timing, and injection period by multi-stage injection of common rail system in the environment that is near to an actual vehicle environment.
-
Product
Through Hole Type AC Current Sensor
CTA-120A
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*For AC current and power measurements.*High accuracy and compact size.*Wide measuring range:AC 1A～120A.
-
-
Product
High Current Probes (Power Electronics) HCB085A11MG4
1012158
-
The High Current Probes (Power electronics) HCB085A11MG4 is designed for robust electrical connections in various high-performance applications. This basic contact probe boasts a compact design with a total length of just 8.90 mm and a projection height of 4.90 mm, making it suitable for precise insertion and reliable contact. With a wide temperature operating range from -45°C to +200°C, the HCB085A11MG4 can withstand harsh environments while ensuring optimal performance. This probe features a nominal travel of 1.00 mm and a maximum travel of 1.20 mm, providing flexibility for different application requirements.
-
Product
Current Sensing
-
voltage-output, current-sensing amplifier family that integrates an internal shunt resistor to enable high-accuracy current measurements at common-mode voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device is a bidirectional, low- or high-side current-shunt monitor that allows an external reference to be used to measure current flowing in both directions through the internal current-sensing resistor sensor. The integration of the precision current-sensing resistor provides calibration equivalent measurement accuracy with ultra-low temperature drift performance and ensures an optimized Kelvin layout for the sensing resistor is always obtained.
-
Product
Current Transformer Coil Type
CCT2
-
SHANGHAI POWOO INDUSTRY CO., LTD
- suitable for small input current; - compact and delicate appearance; - linear output current, high precision; - small volume, light weight, easy to be fixed; - encapsulated with epoxy resin to ensure strong insulation ability; - ABS anti-combustion plastic casing.
-
Product
Suitable For Current Or Voltage Process Signals
SEM1600VI
-
The SEM1600VI is a “smart” powered isolator/conditioner that accepts any voltage signal between (-50 and 50) V dc or any current signal between (-50 and 50) mA
-
Product
AC/DC High Sensitivity Clamp-On Current Probe
N7026A
Oscilloscope Probe
The Keysight N7026A is a 150 MHz bandwidth, active current probe for InfiniiVision and Infiniium oscilloscopes. The probe features wide and flat bandwidth (DC-150 MHz), lower noise (<250 µArms), and wide input range (up to continuous 30 Arms or non-continuous 40 Apeak). This enables you to measure down to 1 mA/div, giving you a much more accurate view of your low-level signals.
-
Product
Fuel Injection Pressure Tester with Quick Couplers
53900
-
Quick couplers provide for fast and easy hook-up. Kit contains adapters to test all GM vehicles with Multi-port and some Throttle Body Injection (TBI). Tests all Chrysler cars with Multi-port turbos and some TBI. Use on Ford older TBI systems not equipped with small Schrader test valve. Includes Large Gage with hang-up hook calibrated from 1-100 PSI (0-7.0 BAR). Supplied with instructions in a vinyl pouch.
-
Product
Leakage Current Clamp Tester with Bluetooth
M-1141XR
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
・Waveform display is possible with connection to a smartphone・Measurement data is to be accumulated in the server, and it is available for graph and CSV output・Auto 5-range : AC 30mA / 300mA / 3A / 30A / 300A・CT inside diameter : φ40mm・Minimum resolution : 0.01mA・Maximum value hold / Data hold function available・Band path filter with center frequency (fo = 55Hz)・Compliant with EN 61010, CAT-III 1000V / CAT-IV 600V・With backlight
-
Product
Basic Fuel Injection Pressure Tester
FIT448
-
This set includes everything to test the following: Bosch AFC, MPC, Digijet/Digifant- (except CIS- use our FIT447) Chrysler Corporation Ford Motor Company General Motors (except TBI- use our FIT446) Japanese Fuel Injection Systems Others using Bendi. The 2-1/2" gauge has a dual scale dial with ranges from 0-100psi and 0-7 bar.
-
Product
High Current Probes (Power Electronics) HCF77214B130G300
1007945
-
The High Current Probes (Power electronics) HCF77214B130G300 are meticulously designed for high-precision applications within the power electronics sector. With a basic contact probe type, this model features a robust temperature tolerance ranging from -45°C to +200°C, making it ideal for various challenging environments. The design incorporates a pitch of 2.54 mm, allowing for effective integration into compact setups, ensuring it meets the demands of modern electronic applications.
-
Product
Current Loop Expansion Kit
OP-SB85C
-
This expansion kit supports current loop communications.The kit incorporates a communications circuit with photo-coupler isolation and constant-current power supply of insulated type, thus realizing not only monitoring but also easy communications testing with passive or active current loop devices.
-
Product
Current Booster
BUX
-
The current boosters allow performing tests up to 2000A, 3000A and 5000A. The option is made of a module, which incorporates a power transformer, which generates a low-voltage, high current output and a metering CT, which measures the output current and sends the metering to eKAM.
-
Product
PXI Analog Output / Current Loop Simulators
-
These modules are aimed at simulating industrial control transceivers, utilizing 4–20mA current loops. The modules include built-in relays for shorts and opens functionality enabling fault insertion testing on every channel and also enable slew rates to be programmed so that different sensors can be effectively mimicked.
-
Product
High Current SMU 600/1200/2400 A
AXC85xx
-
Generate extremely short, fully regulated current pulses in 4 ranges. At the same time, carry out measurements directly on the DUT with the integrated VMU and CMU. Perfect for rapid semiconductor tests during production.
-
Product
High Current Probes (Power Electronics) HCF77216B100G300
1005046
-
The High Current Probes (Power electronics) HCF77216B100G300 is engineered for high precision and reliability in demanding electronic applications. This basic contact probe showcases remarkable capabilities with a design that facilitates a pitch of 2.54mm, ensuring seamless integration into various setups. Designed to operate within a temperature range of -45°C to +200°C, this probe is robust in extreme conditions, offering a continuous current capacity of 20.00 A and a typical contact resistance of just 10.00 mOhm, making it ideal for optimal power delivery.Constructed from premium materials, the probe features a beryllium copper plunger with a gold plating that enhances conductivity and performance. The brass barrel also benefits from gold plating, further ensuring longevity and reliability. With precise mechanical specifications, including a preload of 50.00 cN and a maximum travel of 5.00 mm, the HCF77216B100G300 is adept at maintaining accuracy with a pointing accuracy of +/- 0.08 mm. This is complemented by various accessories designed to facilitate its usage, making it a versatile choice for professionals in the field of power electronics.
-
Product
High Current Probes (Power Electronics) HCF73512A300U300
1035757
-
The High Current Probes HCF73512A300U300 are precision-engineered contact probes designed for power electronics applications. With a continuous current rating of 50A and a temperature range of -45°C to +200°C, these probes are well-suited for high-performance environments. The unique design incorporates a basic contact probe configuration, ensuring reliable electrical connections with a typical contact resistance of just 5 mΩ. This capability makes them ideal for demanding electronic applications where precision and reliability are paramount.
-
Product
Zero Phase Current Transformer
MZL-30
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
Split-core type for measuring zero phase current
-
Product
AC / DC Current Probe, 2 MHz, 500 Arms
N2780B
Battery Probe
The N2780B current probe is an accurate and reliable solution for measuring AC and DC currents. Using a hybrid technology that includes a Hall effect sensor and an AC current transformer, the probe provides accurate measurement of DC or AC currents up to 500 Arms continuous.
-
Product
Split Core Hall Effect DC Current Sensor
CYHCT-C2TC
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on open loop principle and designed with a split core and a high galvanic isolation between primary conductor and secondary circuit. It can be used formeasurement of DC current etc. The output of the transducer reflects the real wave of the current carrying conductor.
-
Product
Current Shunt Module
CURS100
-
The CURS100 converts a current signal output by a sensor or output device (e.g., 4 to 20 mA) to a voltage that can be measured by a datalogger. The 100 ohm resistor used for the current shunt allows currents up to 25 mA to be read on a 2500 mV range (CR10, CR10X, CR510, CR500) and currents up to 50 mA to be read on a 5000 mV range (CR23X, 21X, CR7, CR5000, CR9000, CR9000X).
-
Product
Zero Phase Current Transformer
MZL-65
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
Split-core type for measuring zero phase current
-
Product
Current Integrated Sources
CIS
-
The CIS current integrated source was designed to provide a stable alternating current source for the electricity meter test equipment, and in laboratories. The output current is isolated and independent from the mains voltage. Different CIS versions are available depending upon the values of output power and output current required.
-
Product
Selectable Shunt Current Sensor ±40 V, 20 MHz
CX1104A
Power Sensor
The CX1104A selectable shunt current sensor is a dedicated accessory for the CX3300 series and enables dynamic current measurements from 1 μA to 15 A up to 20 MHz bandwidth with an available calibrated resistive sensor head attached
-
Product
High Current Probes (Power Electronics) HCF77306B300G150
1009398
-
The High Current Probes (Power electronics) model HCF77306B300G150 is specifically designed for high-performance applications in demanding environments. With a robust operating temperature range of -45°C to +200°C, this basic contact probe excels in reliability and performance under extreme conditions. The probe features a compact design with a pitch of 3.50 mm, making it suitable for various integration needs in power electronics.
-
Product
High Current Probes (Power Electronics) HCF73307B300G300
1012453
-
The High Current Probes (Power electronics) HCF73307B300G300 are meticulously designed for precision and reliability in high-performance applications. With a robust continuous current rating of 30A and a contact resistance of just 8 mOhm, these probes are ideal for various electrical testing scenarios requiring accurate measurements under demanding conditions. Their operational temperature range of -45°C to +200°C makes them suitable for diverse environments, ensuring consistent performance across applications.These probes boast a mechanical design that emphasizes durability and precision. Featuring a preload of 60 cN and a maximum travel of 5 mm, they come equipped with a M2 thread and a range of dimensions that facilitate easy integration into existing systems. The tip style, crafted from beryllium copper and plated with gold, ensures low resistance and high reliability, making these probes essential tools in both laboratory and field settings.
-
Product
High Current Probes (Battery Contacting) HCF77517B400G500
1169672
-
The High Current Probes (Battery Contacting) model HCF77517B400G500 offers an exceptional solution for various high-current applications, optimized for performance with a continuous current rating of 50A and capable of withstanding temperature variations from -45°C to +100°C. This model incorporates a basic contact probe design, featuring a pitch of 5.00 mm (197 mil) which ensures reliable connectivity across a range of environments.
-
Product
High Current Probes HCF73506B300G300
1008119
-
The HCF73506B300G300 High Current Probes are designed specifically for power electronics, delivering reliability and precision in demanding environments. Operating within a temperature range of -45°C to +200°C, these probes are engineered to handle continuous currents of up to 50A while maintaining a typical contact resistance of just 5 mOhm, ensuring optimal performance during high-power applications. Their robust mechanical design features a preload of 150 cN and a spring force of 300 cN, enabling effective and consistent actuation with a nominal travel of 4.40 mm and a maximum travel of 5.50 mm. Additionally, the pointing accuracy of +/- 0.10 mm allows for precise measurements, making them integral tools for engineers working in power electronics.
