Code
See Also: Programming, Scripts
-
Product
Enlarge Environmental Chamber
REXMED REC-250
-
MOD. REC-250, AC 230/380/415V, 1/3 phase, Environmental chamber, HS CODE: 841989, UNCCS CODE: 484384, UMDNS CODE: 16327, Main construction: SS304, Interior: SS304, Exterior: SS304 powder coated, Insulation: Rigid polyurethane foam and glass wool, Controller: Fix point PID controller, temperature ˚C/PV and ˚C/SV, humidity %/PV and %/SV display and setting, Temperature range: -20˚C~100˚C, Humidity range: 20%RH~98%RH, Constancy: ±0.3˚C ±2.5%RH, Uniformity: ±1˚C ±3%RH, Temperature and humidity sensor: PT 100Ω, Temperature and humidity audio and visual warning and OFFS correction setting, Temperature heater: 1.5KW X 2pcs, Humidity heater: 2.5KW X 1pc, Heat up transition time: -20˚C~100˚C within 35 min, Refrigeration system: Air cooled, single stage, Cooling compressor: Bristol hermetic compressor, Cooling capacity: 3,140 Watts, 10,700 BTU/hr, 2,702 Kcal/hr, Cool down transition time: 20˚C~-20˚C within 45 min, Safety devices: No fuse breaker, refrigerator over load relay, refrigeration high pressure switch, over temperature protector, protection relay, protection fuse, water level control and overheat protector, Chamber: L60 X W80 X H85cm, Capacity: 408L, chamber with key lock, with lamp (DC 12V 50W) X 1pcs and double glass viewing window, testing cable port with cover: Ø25mm, 4 castors, W/S: shelf X 2pcs, standard testing wet cloth X 5pcs, PCV water container X 1pc
-
Product
IRIG Time Code Receiver & Generator Module
TCR180
-
Meinberg Funkuhren GmbH & Co. KG
The module TCR180 has been designed to receive and to generate IRIG-A/B/G, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 time codes. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements) or as an IRIG converter device. The frequency locking of the master oscillator to the time code system enables this module to generate fixed and programmable standard frequencies with high accuracy and stability. Various oscillator options allow the cost efficient implementation of different requirements concerning the accurracy of the outputs. The generator of the IMS-TCR module generates pulses per second and per minute and per hour. Four programmable outputs are also available. The pulses are synchronized to UTC-second.
-
Product
Portable Electrical Management Systems
EMS-HW50C
-
Progressive Industries Portable Electrical Management Systems (EMS) provide full RV protection against all adverse power conditions. You will feel secure with multi-mode surge, voltage, polarity and lost/open neutral protection. Each unit includes a digital display, scrolling continuously through the power source information: Voltage(s), current, frequency, error code, and previous error code (if applicable). Replacement parts are simply plug-and-play, making repairs quick and easy. As with our portable models, the computer is driven by state of the art microprocessors. Should the software ever change, EMS owners can receive a free upgrade at no cost.
-
Product
Barcode Readers & Scanners
-
High-performance, easy-to-use code readers for reliable high-speed scanning, decoding and communication.
-
Product
HEAVY-DUTY CODE READER
MDBSCHD240
-
*Color display*Rugged enclosure for durability*Global OBDII quick test*Gasoline and diesel engine coverage*Read and clear diagnostic trouble codes*On-screen text in Spanish, French and English*On-screen definitions of diagnostic trouble codes*Set measurement units in SAE English/Metric*Internet upgradeable
-
Product
(Tools (Receptacles) FEWZ-888S1
1035561
-
The FEWZ-888S1, identified by order code 1035561, is a precision tool designed for various receptacle applications in technical environments. With its unwavering commitment to quality, the FEWZ-888S1 boasts a total length of 100.00 mm and an outer diameter of 10.00 mm, making it a compact and efficient addition to any toolkit.
-
Product
Basic Contact Probes (100 Mil) F10011B090G400
1017697
-
The Basic Contact Probes (100 mil) F10011B090G400, identified by order code 1017697, are precision-engineered connectivity solutions designed for versatile applications. These probes feature a pitch of 2.54 mm (100 mil), and they operate within a robust temperature range of -45°C to +80°C, making them suitable for a variety of electronic and mechanical environments. The probes are crafted with high-quality materials, ensuring long-term reliability and performance under challenging conditions.
-
Product
Enclosure Testing
-
MET Labs has been dust and water certifying enclosures for manufacturers and panel shops for ingress protection (IP Code) for over 30 years.
-
Product
Optical Communication Parts
-
Adamant Namiki Precision Jewel Co Ltd.
Zirconia ferrule sleeve is an important part in optical fiber communication and is the basic product of our optical communication parts. We have developed an optical communication parts part of hasad developed based on grinding and bearings. Offer Optimum Performance And Quality For Each Type Of Optical Fiber, Optical Connector And Optical Device. We Also Offer Pin Gauges And Ring Gauges For Measuring Precise Dimensions Indispensable To Our Quality Assurance . These Gauges Have Little Wear, Good Compatibility With Ferrules And Sleeves, Zirconia , sapphire and cemented carbide are used as materials.Various Optical Connectors And Adapters Using Ferrules And Sleeves, Follow The Long History FC And SC Connectors, MU , LC Connectors Are Also Available. In Particular, LC Connectors Are Deployed In A Wide Lineup With Adapters. In The Field Of Optical Devices, We Provide Codes Master , Various Patch Cords , Conversion Adapters That Connect Different Types Of Connectors, Attenuators And Terminators That Provide Stable Characteristics, Which Are Manufactured Using The Ferrule Quality Of Our Own Manufactured Parts We Will. We Also Offer Parts For Optical Devices SuchAs Fiber Array Used For Connection Of PLC, AWG And Others. In The Field Of Optical Modules, SC And LC Receptacles , Fiber Stub, Pigtail Fiber And Other Optical Module Parts, And Now We Have Provided TOSA, ROSA And Other Optical Module Manufacturing Consignment Services. We Also Deal With Various Lensed Fibers Which Processed Fiber Tip With High Precision . In Addition, We Also Flexibly Deal With Precision Component Processing Used In Optical Communication Field, Special Specification Ferrule, Sleeve Etc. Please Contact Us.
-
Product
Switch Probes (Normally Open (NO)) F87506B230G200
1007055
-
The Switch Probes (Normally Open, NO) model F87506B230G200, with order code 1007055, are designed for precision applications requiring reliable performance in a variety of environments. With a temperature range of -45°C to +100°C, these probes are suitable for both extreme cold and heat, ensuring operational efficiency in demanding conditions. The innovative design features a basic contact probe configuration that delivers precision and accuracy, marking it a dependable choice for engineers and technicians alike.
-
Product
Coaxial Probe HF76MATEAXm0120G630MSMPmS
1139313
-
The HF76MATEAXm0120G630MSMPmS coaxial probe, designated by order code 1139313, is engineered with precision to meet demanding electrical specifications. With an impedance of 50 ohms and a maximum operating frequency of 20 GHz, this probe ensures optimal performance in high-frequency applications. Notably, it features a design with a nominal travel of 5.00 mm and maximum travel of 6.30 mm, which allows for robust engagement and reliable signal transmission. The materials used in its construction, including a brass barrel plated with gold and a plunger made of beryllium copper, guarantee durability and excellent conductivity.
-
Product
Basic Contact Probes (75 Mil) F07533S078L280
1001397
-
The Basic Contact Probes (75 mil) F07533S078L280, identified by order code 1001397, are engineered for precision and reliability in various applications. These contact probes feature a compact design with a pitch size of 1.90 mm (75 mil), making them ideal for tight spaces. Operating within a temperature range of -45°C to +80°C, these probes are suitable for diverse environmental conditions. Their robust construction ensures durability while maintaining optimal performance under specified conditions.
-
Product
Push Back Probes (VF4) VF406B240G10
1002325
-
The Push Back Probes (VF4) VF406B240G10, with order code 1002325, are engineered for precision and reliability in a variety of applications. With a basic contact probe design, these probes boast exceptional characteristics such as a pitch of 4.00 mm (157 mil) and an operational temperature range from -45°C to +100°C. The robust construction includes a plunger made from beryllium copper with gold plating, combined with a brass barrel also plated in gold, ensuring high conductivity and resistance to corrosion.
-
Product
Code Analysis
Kiuwan
-
Identify code defects & vulnerabilitesto manage your remediation effortsBlazingly fast analysis in a collaborative and unlocalized environment.
-
Product
Sophisticated Audio and Video Test Patterns
VQL
-
VQL Instantly reveals your video display, codec, scaler, converter or other video device performanceVQL test patterns cover all 3 levels of video QA/QC:Instant visual-aural Quality EstimationObjective Measurements of video and audio performanceFully automated (unattended) Quality ControlVQL features:Compatibility with all commonly used software or hardware codecs and media playersVideoQ VQV / VQMA / VQTS / VQDM compatible testsWide range of video frame sizes: from 192x108 to 4096x3072Variety of bit rates up to uncompressed 4:4:4 4K @60 fps, 48 bit per pixelVariety of video and audio formats, color spaces and level schemesAll test patterns remain suitable for accurate measurements even after low bitrate coding, heavy scaling and/or cropping, e.g. after down-conversion for mobile devicesStandard, custom and semi-custom tests for development labs, content processing facilities, CDN systems, software developers and high volume manufacturers
-
Product
Circuit Design Tool
-
SA-Designer lets you design actual analog front-end circuits employing Smart Analog products (Note1) and then generates the circuit data as C source code.
-
Product
EasyQRCode
-
Automatic detection of the code in the imageDecodes model 1 and model 2 QR codes, all versions, all levelsDecodes Micro QR codesVery fast operationImpressive robustness to noise, blur and distortionError detection and correctionRotation and flipping invariantPrint quality verification with grading standardsMultiple codes reading
-
Product
Switch Probes (Normally Open (NO)) F87506B180G080
1007937
-
The Switch Probes (Normally open (NO)) F87506B180G080, defined by order code 1007937, represent an optimal choice for high-precision applications. Engineered with a basic contact probe design, these components exhibit a robust operational capacity with a continuous current rating of 5.00 A. The probes operate effectively within a wide temperature range from -45°C to +100°C, ensuring reliable performance under various environmental conditions. Featuring a sophisticated design family, F875-NO, these probes integrate essential technical features that enhance functionality and accuracy in diverse mechanical setups.
-
Product
RFID
LF (BIS L)
-
BIS L uses a low frequency (LF) of 125 kHz with passive data carriers. These data carriers are read/write, designed for use in harsh environments and chemically highly resistant. With BIS L you can handle applications with special demands economically. Small form factors and versions with enhanced data security (additional check code) also provide great flexibility.
-
Product
Development System
FE-SND2
-
* Emulates Atmel AT89C51SND2 Microcontrollers * 62K Code Memory * Real-Time Emulation * Frequency up to fmax * ISP and X2 Mode Support * Windows Debugger For C, C++ and Assembler * USB or RS-232 Linked to PC * C Compiler and Assembler
-
Product
Basic Threaded Probes (F731) F73111B065G300
1001427
-
The Basic Threaded Probes (F731) F73111B065G300, identified by order code 1001427, are essential components designed to meet the rigorous demands of precision electronic applications. With a pitch of 2.40 mm and a temperature range of -45°C to +100°C, these probes deliver reliable performance across varied environmental conditions. Their robust design, featuring Beryllium copper plungers plated with gold, ensures exceptional conductivity and durability, making them suitable for continuous use in specialized applications where reliability is paramount.
-
Product
ARINC 429 Test & Simulation Interface for PCI Express
PCIe-C429
-
Avionics Interface Technologies
4, 8, 16, or 32 Software Programmable Tx/Rx Channels - Programmable High/Low Speed Operation - Concurrent operation of all Tx/Rx Channels at high data rates - Full error injection and detection • Data capture filtering, 100% bus recording, and physical bus replay - Rate-oriented Label Transmission - Label Selective Trigger for Capture/Filtering - IRIG-B time code encoder/decoder with free-wheeling mode - Application Interface supporting C/C++, C# and VB.NET Development - Device driver support: Windows, Linux, LabVIEW Real-Time (others on request) - Compatible with AIT’s Flight Simulyzer GUI Bus Analyzer Software
-
Product
Silver Ball Matrix Sockets
-
SM Contact is a unique contact that has precise silver balls held together by a proprietary conductive formulation. These conductive columns (diameter optimized for 50 ohm impedance) are suspended in a non-conductive flexible elastomer substrate with a patented solid core for enhanced durability and reliable performance over time, temperature and cycles. This flexible substrate is very compliant and resilient and enables the conductive columns to revert back to original shape when the force is removed. Solutions are available for 0.25mm to 1.27mm LGA, BGA, QFN, CSP, POP, WLP and other packages. The silver ball matrix contact technology is also available with a protective plunger matrix (a gold plated copper cylinder) that sits on top of the conductive columns. This plunger matrix protects the conductive column from contamination from various solder ball interfaces. A quickly replaceable plunger matrix enables minimal downtime during final production test. The product family code for this line of sockets is SMP.
-
Product
Cable 100-Pin Micro-D Male to Unterminated, Cut Ends, 2m 2-56 UNC Screwlocks, Metal Shell
A100SMR-C-9A200
Cable Assembly
This 2m long male to unterminated 100-Pin SCSI Style Micro-D Cable Assembly is suited for direct connection to various products using the 100-Pin connector. It is constructed from 100-Pin twisted pair cable with varying left and right hand lays to minimise crosstalk. The Cable is colour coded to ensure easy connection. Screwlocks are provided to secure the SCSI connector to its associated product.
-
Product
IB-R-SB-085-4A-WW-03-FL
1170326
-
The IB-R-SB-085-4A-WW-03-FL block, identified by order code 1170326, is a crucial component for ICT fixtures, designed to cater to a wide operational temperature range of -45°C to +100°C. This versatile block facilitates seamless electrical connections with a continuous current capacity of 4.00 A, making it ideal for various applications within infrastructure solutions.
-
Product
PCMCIA Card
DAS-429PCMCIA/RT10
-
Both cards contain 68 Kbytes of true dual-port RAM, for data blocks, control registers and Look-up table, mapped within the Common Memory space. The card also contains a FLASH-based Card Information Structure (CIS) within the Attribute Memory space.The cards comply with the Personal Computer Memory Card International Association (PCMCIA Release 2.1) standard, including Plug and Play. The card's small size and suitability for PCMCIA compatible notebook computers with Type II and Type III slots make it a complete solution for developing and testing ARINC-429 interfaces and for performing system simulation of the ARINC-429 bus, both in the lab and in the field.The cards are supplied with C drivers, including source code, Mystic Windows software and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application.
-
Product
Cable Assembly, 25-Pin D-Type, Female to Unterminated With Tinned Ends, 2m
A025DF4-T-0A200
Cable Assembly
The 25-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 19/0.18 (21AWG) Tinned Copper wire. The connector can be secured to the product by screwlocks. The unterminated connections are coded to match the connector pin designation. Please ensure appropriate electrical safety precautions are observed when using this product.
-
Product
68HC(S)12 In-Circuit Debugger
ICD12Z
-
P&E's ICD12Z for Windows is a powerful tool for debugging code. It uses the HC(S)12 processor's background debug mode (BDM), via one of P&E's hardware interfaces, to give the user access to all on-chip resources.
-
Product
PCI Card
EXC-4000PCI/xx
-
Each channel using the M4K1553PxS (RT validated) module operates either as a Bus Controller, Remote Terminal, or Bus Monitor.NOTE: the M4K1553PxS module is NOT compatible to the M4K1553MCH module.The EXC-4000PCI/xx is supplied with C drivers (including source code), Merlin+ Windows software and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application. Mating connector provided for I/O connection.
-
Product
Basic Contact Probes (100 Mil) F77206B150G150
1001620
-
The Basic Contact Probes (100 mil) F77206B150G150, designated by order code 1001620, are engineered for precision and reliability in various applications. Designed with a pitch of 100 mil (2.54 mm), these probes can operate efficiently in a temperature range from -45°C to +80°C. With a robust construction that combines beryllium copper and gold plating for the tip and barrel, respectively, they ensure excellent conductivity and longevity, making them ideal for demanding environments.
