Product

Fiber Optic Connectors & Cages

-

Pulse Electronics

Pulse Electronics

Pulse Electronics Networking BU supplies high-quality fiber optic connectors and cages to innovative ODMs, OEMs and other manufacturers designing today’s most demanding network products. Our line of 40+ fiber optic connectors include SFP, SFP+, and QSFP connector and cage products.

Product

High-Speed Optical Delay Line

-

MesaPhotonics, LLC

MesaPhotonics, LLC

The Peregrine Optical Delay Line (1-cm, 60 ps delay) and the Gyrfalcon Optical Delay Line (2-cm, 120 ps) are high-speed, high precision, voice coil motor optical delay lines. They have zero-backlash and no hysteresis. Both have similar form factors that are compatible with 30-mm cage components and 1.035” – 40 threads. Both include full digital and analog control and include a USB interface.

Product

Low Voltage DC / Battery Powered HV Amplifiers

WMA-02 And WMA-02LF

-

Falco Systems

WMA-02 And WMA-02LF - Falco Systems

The Falco Systems WMA-02 is a high voltage amplifier that runs from an 24 - 30V DC power supply and can be battery powered if required, e.g. for use in a Faraday cage. Its internal high voltage generator is inductor-free and hence does not spread magnetic interference in sensitive experimental setups. The output noise is impressively low at 4mVrms. For extremely low noise applications where bandwidth is not an issue, a dedicated WMA-02LF version is available that contains an output low pass filter capacitor which reduces the bandwidth to 50Hz, but makes the noise drop to below 0.2mVrms. This bandwidth-limited amplifier is ideal for MEMS or piezo positioning with manual voltage adjustment.

Product

VME Test Extender 9U/220mm Universal

110EXT9122-0000

-

ELMA Electronic, Inc.

110EXT9122-0000 - ELMA Electronic, Inc.

The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the DIP switches.

Product

DC Coreless Motor

-

Adamant Namiki Precision Jewel Co Ltd.

Adamant Namiki Precision Jewel Co Ltd.

There is a structure in the cage shape by only the copper wire turns around a cylindrical permanent magnet placed inside It is a feature. There There is not an anron core, it does not receive the action of the copper basket type rotor is light, the moment of inertia becomes small, so quick response is possible. A Permanent Magnet, There Is No Cogging, That Is, Rotation Is Smooth, And Vibration And Noise Can Be Reduced. - Since Rare Earth Magnets With High Magnetic Properties Are Used And The Rotor Is Formed Only With Coils, The Motor Itself Can Be Made smaller and lighter.

Product

VME Test Extender 3U/220mm Universal

110EXT3122-10xx

-

ELMA Electronic, Inc.

110EXT3122-10xx - ELMA Electronic, Inc.

The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the DIP switches.

Product

VME Test Extender 6U/220mm J1/J2

111EXT6122-012X

-

ELMA Electronic, Inc.

111EXT6122-012X - ELMA Electronic, Inc.

The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the DIP switches.

Product

VXS Type 32V, w/plug in PSU

32V05LY348Y3VGE0

-

ELMA Electronic, Inc.

32V05LY348Y3VGE0 - ELMA Electronic, Inc.

VXS Type 32V family of enclosures provide a lightweight, tower platform for packaging portable VITA System applications. Designed to VITA & IEEE. Systems can be configured with or without rear I/O card cage.

Product

PCI Termination Products

-

Acromag, Inc.

Acromag, Inc.

Acromag provides a broad selection of hardware accessories to simplify the use of our I/O boards. This collection of panels, cables, and adapters facilitate field wiring and cable connections between boards within the card cage. Select from an assortment of cables and termination panels to simplify wiring and installation.

Product

Faraday Cages

-

LBA Group, Inc

LBA Group, Inc

LBA's EMFaraCage® faraday cages are EMI and RFI shielding boxes and RF test enclosures that bring convenience to device testing. Faraday cages are ideal for isolating critical systems in high field RF environments or wherever RF ingress or egress must be minimized. Security, production testing, biomedical research and semiconductor testing are only a few of the many areas where EMFaraCage® faraday shielded enclosures are employed. EMFaraCage® faraday cage enclosure systems are fully featured to support a wide variety of test missions. The standard faraday cages include effective power, dataline and RF signal isolation in large test volumes. EMFaraCage® faraday cages are much more affordable than shielded room solutions and offer the convenience of portability.

Product

19" Subracks

-

ELMA Electronic, Inc.

ELMA Electronic, Inc.

Elma implements quickly and easily scalable, robust 19'' subracks, card cages or rackmount chassis for the use in just about any industry or environment: Industrial automation, test & measurement, transportation, energy, defense, communications and medical. The products of Elma Electronic support standards such as IEC, IEEE or AdvancedTCA.

Product

Antenna Rotator

PRO.SIS.TEL

-

Array Solutions

PRO.SIS.TEL - Array Solutions

This manual cover installation on a mounting plate inside a tower or a rotator cage with a thrust bearing. The rotator consists of a rotator and a control box unit.

Product

5 Slot VME64x Portable Tower Development Platform; Type 32 Tower Chassis

32V05OP146N3VGBX

-

ELMA Electronic, Inc.

32V05OP146N3VGBX - ELMA Electronic, Inc.

Elma Type 32V family of enclosures provide a lightweight, tower platform for packaging portable VITA System applications. Designed to VITA & IEEE . Systems can be configured with or without rear I/O card cage.

Product

Type 12R2, 10U, 19" Rackmount, MIL-Rugged, Vertical

12R2-10U-V

-

ELMA Electronic, Inc.

12R2-10U-V - ELMA Electronic, Inc.

The 10U, 12R2 is designed to meet the harsh environment of shipboard, airborne, and ground mobile applications per MIL-STDs. Shock isolated versions are designed to attenuate 25G shock inputs to the chassis to less than 10Gs at the card cage.

Product

Signal Evaluation Systems

-

ifm efector, inc.

ifm efector, inc.

*Integrated flow, temperature and wire monitoring*Adjustable switching outputs for monitoring flow and temperature*Clearly visible multi-color LED bargraph display*Signal output via potential-free relay contacts*Connection options: Insulation displacement / screw terminals and cage clamps

Product

Type 12R2, 19" Rackmount, MIL-Rugged, Family

12R2

-

ELMA Electronic, Inc.

12R2 - ELMA Electronic, Inc.

The 12R2 is designed to meet the harsh environment of shipboard, airborne, and ground mobile applications per MIL-STDs. Shock isolated versions are designed to attenuate 25G shock inputs to the chassis to less than 10Gs at the card cage.

Product

Highly Dynamic XY Linear Motor Scanning Stage

L-731

-

Physik Instrumente GmbH & Co. KG

L-731 - Physik Instrumente GmbH & Co. KG

The magnetic linear direct drive is designed to provide high velocity and acceleration for inspection and microscopy. With a travel range of 205 mm square and solid velocity to 100 mm/sec, the L-731 is equipped to deliver high accuracy and smooth motion. Precision crossed roller bearings with anti-creep cage assist enable superior guiding accuracy (1.5 m straightness for loads up to 20 kg). An integrated optical reference encoder and limit switch provide further positioning control and accuracy for this compact stage with 5 nm resolution. DC servo motor versions are available on request.

Product

Animal Temperature Controller - Low Voltage

TCAT-2LV

-

Physitemp Instruments

TCAT-2LV - Physitemp Instruments

Our TCAT-2 family of general purpose PID Autotuning Controllers provides accurate temperature control in a variety of laboratory applications. Combined with a heat lamp or heating pad, the TCAT-2 may be used to maintain the body temperature of anesthetized animals during surgery or stereotaxic procedures. Small animal cages are easily warmed with a heat lamp. The TCAT-2 may also be used in cooling applications, such as to control independent perfusate cooling systems. Realizing that laboratory applications are diverse, Physitemp can provide several versions of the TCAT Controller. The model specified depends on whether a laboratory has a general or specific need for the controller

Product

Low Voltage DC / Battery Powered HV Amplifiers

WMA-01 And WMA-01LF

-

Falco Systems

WMA-01 And WMA-01LF - Falco Systems

The Falco Systems WMA-01 is a high voltage amplifier that runs from an 24 - 30V DC power supply and can be battery powered if required, e.g. for use in a Faraday cage. Its internal high voltage generator is inductor-free and hence does not spread magnetic interference in sensitive experimental setups. The output noise is impressively low at 3mVrms. For extremely low noise applications where bandwidth is not an issue, a dedicated WMA-01LF version is available that contains an output low pass filter capacitor which reduces the bandwidth to 50Hz, but makes the noise drop to below 0.1mVrms. This bandwidth-limited amplifier is ideal for MEMS or piezo positioning with manual voltage adjustment.

Product

Analog Output Module, 16-bit D/A

IP231

-

Acromag, Inc.

IP231 - Acromag, Inc.

The IP231 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds four IP modules, up to 64 voltage outputs can be obtained from a single card cage slot.