Product

Electrolytic Capacitor Analyzer

13100

-

Chroma ATE Inc.

13100 - Chroma ATE Inc.

Analyzer is a general measurement instrument designed for analyzing the features of electrolytic capacitor s. It has multiple func tions that can be programmed based on the capacitor features by altering the settings to test metal oxidization thin-film withstand voltage, capacitor leakage current, capacitance, dissipation factor, impedance and equivalent serial resistance, etc.

Product

Non-steady-state probe for thermal conductivity measurement

TP02

-

Hukseflux Thermal Sensors B.V.

TP02 - Hukseflux Thermal Sensors B.V.

TP02 is a probe that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at the highest accuracy level. It works in compliance with the ASTM D 5334-00, D 5930-97 and IEEE 442-1981 standards. The standard TP02 probe has proven suitability in soils, thermal backfill materials, sediments, foodstuff, powders, sludges, paints, glues and various other materials. The Non-Steady-State Probe (NSSP) measurement method (also known as transient line source, thermal needle, hot needle, heat pulse- and hot wire technique) has the fundamental advantages that it is fast and absolute while the sample size is not critical. Hukseflux is specialised in NSSP design. Special models have been developed for in-situ field experiments. For permanent installation in soils, a dedicated model, TP01, is available. TP02 has been designed and tested in collaboration with the Applied Physics Group of Wageningen University.

Product

Loop Resistance Measuring Device According to DIN EN 61557-3 (VDE 0413-3)

-

PeakTech Prüf- und Messtechnik GmbH

PeakTech Prüf- und Messtechnik GmbH

A loop tester which is used to test the safety of electrical systems. These device measures the impedance of the short-circuit loop between the outer conductors of a circuit, whereby the probable short-circuit current is calculated. The protection of the circuit (miniature circuit breaker) must therefore trigger at a lower current than the expected short-circuit current, in order to avoid excessive heating of the lines and thus a fire risk. The PeakTech 2715 is due to its function and its robust design almost indispensable when performing new installations, but also for general checking of electrical systems, this device is the ideal companion.

Product

Leak and Seal Strength Tester

LSSD-01

-

Jinan Saicheng Instrument

LSSD-01 - Jinan Saicheng Instrument

LSSD-01 Leak and Seal Strength Tester is suitable for the quantitative measurement of sealing strength, heat sealing strength, binding strength, overall sealing performance, pressure resistance strength, cap body connection strength, bursting pressure and shedding strength. It is widely used in the soft package, plastic pilfer-proof caps, flexible pipes, etc.

Product

Ultra-High Resistance Scanner

6564

-

Guildline Instruments Ltd

6564 - Guildline Instruments Ltd

Ultra-High Resistance Scanner is the only Scanner capable of operating with measurements to 10 PΩ’s (1015) and at voltages to 1000 Vdc. The 6564 has world-leading isolation of 1017 with repeatable offsets above this resistance. Researchers and Metrologists can now easily and quickly automate single or multiple resistance measurements.

Product

True RMS Digital Multimeter

MM94

-

Martindale Electric Co. Ltd

MM94 - Martindale Electric Co. Ltd

The MM94 is a high performance True RMS multimeter with a 600V CAT IV safety rating.

It has an extended current measurement range up to 20A for short cycle measurements. Measurement capabilities include AC/DC voltage, capacitance, resistance and temperature with the included K Type thermocouple. Features include Min/Max and Peak measurement and a high frequency filter to optimise readings for distorted waveforms plus a relative mode.

The rugged design includes a 60,000 count backlit display with analogue bargraph.

Product

Earth Meter

EM-4055

-

MEGABRAS srl

EM-4055 - MEGABRAS srl

The EM-4055 Earth Meter is a digital, microprocessor-controlled instrument that allows to measure the earth resistance and ground resistivity (using Wenner´s method), as well as to detect parasitic voltages present in the ground. This instrument is well suitable to measure earth systems in power substations, industries, distribution networks, etc., according to VDE 0413. It is also suitable for soil resistivity measurements, in order to optimize the earth systems project

Product

Reach-In Xenon Lamp Weathering Test Chamber

-

ACMAS Technologies Pvt. Ltd.

ACMAS Technologies Pvt. Ltd.

Weiber xenon lamp chamber uses xenon lamp to simulate the whole sunlight spectrum that can produce many destructive effects on the products. This simulation environment provided in the chamber is used to test the resistance of various manufactured products towards these destructive conditions. This chamber is used for quality control, product development and scientific researches and many more. With a variety of models and options, you can customize your chamber to fit your testing needs. Reach in chambers provide a compact testing area for small applications. These are easy to install, transport and occupies less space.

Product

Acceleration Simulation Mode (ASM) Roller Set

ASM-P | VP 230046

-

Maschinenbau Haldenwang GmbH & Co. KG.

ASM-P | VP 230046 - Maschinenbau Haldenwang GmbH & Co. KG.

The ASM-P roller set is used in test centres and is suitable for vehicles with a single driven axle. It was designed for the exact measurement of the exhaust gas behaviour of vehicles during their transient emission test and permits a driving resistance simulation for the exhaust gas tests ASM-5015 and ASM-2525 (Acceleration Simulation Mode) in accordance with the specifications BAR '97. The increased tractive force of its eddy current brake means that the ASM-P is also suitable for power measurements at constant speed and constant tractive force.

Product

Automatic Metallic Pendulum Impact Testing Machine

-

Jinan Testing Equipment IE Corporation

Jinan Testing Equipment IE Corporation

JB-450/750A automatic type pendulum impact tester is used to determine the impact resistance of metal materials under dynamic load and is capable of doing a large number of impact tests continuously. The automatic type pendulum impact tester can display the impact power, impact toughness, and the pendulum's rotation angle. All the testing reports can be printed out. JB-450/750A can be equipped with fully automated sample feeding system, which greatly improves the test efficiency, and reduce labor intensity. The crygenic cooling device is available for impact tests under the lowest temperature down to -196 C. The automatic type pendulum impact testing system is the essential quality control equipment for metal material manufacturers and QC departments, as well as the necessary instrument of research institutes for new material research.

Product

UV Resistance Test Chamber

-

MRC ltd.

MRC ltd.

The UV Weather resistance test chamber is the world’s most widely used weathering tester to test types of damages include color change, gloss loss, chalking, cracking, crazing, hazing, blistering, strength loss and oxidation.

Product

Low Resistance Meter

MMR-640

-

Sonel S.A.

MMR-640 - Sonel S.A.

The MMR-640 meter is designed to measure very low resistance of resistive objects. This product is made to be used in power plants, railways and maintenance companies to measure resistance of:*breakers, contacts,*earthing conductors, equipotential bondings,*welded and soldered connections,*bolted connections,*and other resistive objects.

Product

Guardian Hipot Analyzer

19056/19057

-

Chroma Systems Solutions, Inc.

19056/19057 - Chroma Systems Solutions, Inc.

Chroma’s Guardian 19056/19057 Hipot Analyzer is specially designed for testing and analyzing ultra-high withstand voltage. The series of models include 10kVac / 12kVdc / 20kVdc with maximum AC20mA / DC10mA output that can perform AC / DC withstand voltage and insulation resistance tests with contact check during production line test.

Product

Bimetal Thermometer

BT

-

Dwyer Instruments Inc.

BT - Dwyer Instruments Inc.

Series BT Bimetal Thermometers offer accurate, reliable service even in the toughest environments. These corrosion resistant units are constructed from stainless steel and are hermetically sealed to prevent crystal fogging.

Product

Contacts Resistance Tester

JYK II

-

Kingrun Instrument Co., Ltd.

JYK II - Kingrun Instrument Co., Ltd.

•Instrument IPC architecture for domestic production of all models of metal contacts SF6 switchgear, GIS combination of electrical, vacuum switch, oil switch and column switches, contacts and so on.•Sensor: Acceleration speed sensor, rotation speed sensor, linear stroke sensorinstallation is very easy and simple.•Trigger: The trigger, external trigger, the sensor is triggered. Sensor can trigger the circuit breaker manually switching characteristic test, such as a manual column pole division switch.

Product

Resistance Meters

-

ACL Inc.

ACL Inc.

ACL provides surface resistance/resistivity meters and digital megohmmeters to quickly and accurately measure resistivity.

Product

Digital Earth Resistance Tester

8PK-ST1520

-

Prokit's Industries Co., Ltd.

8PK-ST1520 - Prokit's Industries Co., Ltd.

Capable of measuring earth voltage (Vac.) 2mA measuring current permits earth resistance to test without tripping earth leakage current breakers in the circuit. Battery operated. Auto power off function. Data hold function. Small and light weight.

Product

Electrical Tester

T6-600

-

Fluke Corporation

T6-600 - Fluke Corporation

The electrical tester offers a variety of measurement options giving you an all-in-one troubleshooting tool. Measure true rms voltage and current from 0 to 200 A AC or 1 to 600 V AC or DC. You can also gather resistance measurement from 1 Ω to 2000 Ω. With the easy-to-read backlit display, you can keep see your work in dark environments and keep your most recent measurement on the screen with the HOLD button for easy viewing. The T6-600 also accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation.

Product

Time Domain Induced Polarization /Resistivity Receiver

IPR-12

-

Scintrex Limited

IPR-12 - Scintrex Limited

This allows you to troubleshoot and monitor data quality for the most efficient IP survey possible. With an IPR-12 you will have an excellent tool to get the best possible IP data from your survey.