Product

32-Pin High-Current Block | Receiver Side

281063

-

ATX Hardware GmbH

281063 - ATX Hardware GmbH

This 32-pin high-current block is equipped with wafer (VGRCB-32P). Voltage 250VAC. Current 20A. Contact resistance 5mΩ. Absorption capacity 21pf. Inductance 3nH. Resistance 25,000 cycles. Solder connection. Max. Power loss: 25W.

Product

(PIN Or APD) + TIA Optical Receivers

-

Discovery Semiconductors, Inc.

Discovery Semiconductors, Inc.

Low-Noise, High-GainLow Group DelayLowest PDL (typical 0.05 dB)Useable spectral wavelength range of 800-1650 nm

Product

Compact Digital Receiver

DCR822

-

Lectrosonics, Inc.

DCR822 - Lectrosonics, Inc.

The DCR822 compact 2-channel digital receiver with analog and digital audio outputs utilizes the Lectrosonics signature digital architecture with remarkable audio quality and ultra-low latency. The receiver includes an extended operating range rivaling the best analog and Digital Hybrid Wireless® systems with continuously tunable tracking filters covering 470.100 - 614.375 MHz. The innovative Vector Diversity technology raises the bar for digital transmission integrity with two RF front ends per channel, and a unique phase-matching system. The extremely robust RF front ends of the receiver will hold up in severe RF environments and close carrier spacing, whether analog or digital. The DCR822 has a flexible output routing scheme, allowing a variety of applications including Talkback. And, a digital recorder at 24 bits, 48 kHz is included – and records up to 4 audio tracks on a front-mounted microSD card.

Product

Radio Receivers

-

STMicroelectronics

STMicroelectronics

ST is a leading provider of broadcast audio solutions for automotive infotainment systems, offering a complete portfolio of AM/FM, terrestrial and satellite digital broadcast and multi-standard receiver ICs designed to deliver world-class performance and features. By designing with ST, you’ll benefit from the most innovative technologies, a full commitment to automotive “culture”, and a solid system know-how to build scalable solutions, from entry-level car radios to multi-antenna designs.

Product

Portable Multi Phase protection relay test set with GPS

TEST-630

-

Beijing GFUVE Electronics Co.,Ltd.

TEST-630 - Beijing GFUVE Electronics Co.,Ltd.

Test-630 multi Phase Universal protection relay test set have 6U6I output, it is a universal protection relay tester with eight pairs of binary input and four pairs of binary output

Product

2 Micron InGaAs Photodiodes And Optical Receivers

-

Discovery Semiconductors, Inc.

Discovery Semiconductors, Inc.

Discovery Semiconductors has a long, successful history with the commercialization of high speed, 2.2 um cutoff, uncooled, InGaAs SWIR photoreceivers. We introduced our DSC R202 PIN+TIA Receiver in February 2002 for the LIDAR community. In 2012, we expanded our product portfolio to include high speed photodiodes up to 20 GHz, and Linear Balanced Photoreceivers up to 18 GHz. These new receiver products will nicely complement the rapid advances in the 2.05 fiber lasers, thus spinning off new applications in diverse areas such as biomedicine, as well as environmental sensing.

Product

EMI Receiver

Core-6

-

FRANKONIA GmbH

Core-6 - FRANKONIA GmbH

The "CORE-6" is a very compact (19", 1 RU), new digital EMI receiver which enables the user to make frequency-sweeps within a few seconds what saves hours of measuring timeduring developments.

Product

2-Port 9 GHz Analyzer, Direct Receiver Access

C2209

-

Copper Mountain Technologies

C2209 - Copper Mountain Technologies

C2209 Vector Network Analyzer delivers industry-leading dynamic range and sweep speed, with all the features engineers have come to expect included standard in our software.

Product

GPS, GLONASS, Galileo Micro Splitter 2 Way, SMA, 1176.45 - 1602.00 MHz, 50 Ohm, Passive

GPSL15

-

INSTOCK Wireless Components, Inc

GPSL15 - INSTOCK Wireless Components, Inc

GPSL15 is a two way, passive, GPS signal splitter ideal for splitting a GPS antenna signal between two receivers while providing a DC current path to power a remotely located active GPS antenna from one receiver while blocking the DC path from the other. Max voltage rating at the DC blocked port is 10 VDC; maximum current rating is 50 mA. Maximum voltage rating at the DC pass port is 50 VDC; max current rating is 1000 mA. Furnished with SMA female connectors all ports. Being a "micro-sized" splitter, GPSL10 weighs only 21 grams and is suitable for applications requiring low-weight parts.

Product

GPS, GLONASS, Galileo Micro Splitter 2 Way, SMA, 1176.45 - 1602.00 MHz, 50 Ohm, Passive

GPSL12

-

INSTOCK Wireless Components, Inc

GPSL12 - INSTOCK Wireless Components, Inc

GPSL12 is a two way, passive, GPS signal splitter ideal for splitting a GPS antenna signal between two receivers while providing a DC current path to power remotely located active GPS antennas from the receivers. Maximum voltage rating is 50 VDC; max current rating is 1000 mA. Furnished with SMA female connectors all ports. Being a "micro-sized" splitter, GPSL12 weighs only 21 grams and is suitable for applications requiring low-weight parts.

Product

GPS Wireless Clock

-

Signals & Systems India Private Limited

Signals & Systems India Private Limited

GPS Clock offers an easy, cost-effective solution for accurate, synchronized time displays without expensive, disruptive installation procedures. Because there are no wiring requirements, installation times are drastically reduced. It is ideal for renovation projects, as there is no need to worry about installation work, as well as new construction. The GPS clock can be synchronized through GPS Antenna or Wireless Antenna. The display can be wall/panel / tabletop mountable. It can be used as a wireless clock to synchronize many wireless slave clocks in and around the buildings.

Product

PCI Express 4 Base Specification Receiver Test Automation

N5991PB4A

-

Keysight Technologies

N5991PB4A - Keysight Technologies

The N5991PB4A is the receiver test automation software for bit error ratio testers, allowing you to test and characterize PCI Express 4.0 ASICs.

Product

LVDS (Low Voltage Differential Signaling) Drivers and Receivers

-

Analog Devices Inc.

Analog Devices Inc.

LVDS (Low Voltage Differential Signaling) Drivers and Receivers from Analog Devices offers designers robust, high speed signaling for single-ended to differential solutions for point-to-point applications. Our selection of products conform to the TIA/EIA-644 LVDS standard and contain the first LVDS transceivers to meet 8 kV IEC ESD performance standards - important for robust, interboard applications where the connectors can be exposed to more harsh electrostatic environments. Companion differential line receivers and differential line drivers support up to 600Mbps. LVDS greatly improves noise immunity and minimizes emissions for high speed point-to-point data transmission and is a low power alternative to emitter-coupled logic (ECL) or positive emitter-coupled logic (PECL) signaling.

Product

GPS Antenna Signal Splitter 3 Way, N Type, Passive, L1 & L2, 50 Ohm

GPS300

-

INSTOCK Wireless Components, Inc

GPS300 - INSTOCK Wireless Components, Inc

GPS L1 - L5, GLONASS, Galileo SplitterLow Insertion Loss (0.3 dB avg)High Port to Port Isolation (30 dB avg)Excellent VSWR (1.10 : 1 avg)15 VDC & 75 mA max on DC block portsRoHS Compliant Splitter Construction

Product

AGC Balanced PIN + TIA Optical Receiver

-

Discovery Semiconductors, Inc.

Discovery Semiconductors, Inc.

Adjustable differential transimpedance gain (50 to 4000 ohms)Adjustable differential output voltage (200 to 700 mVp-p)Wide optical dynamic range of -16 to +2dBmWavelength Range of 1064 to 1650 nmExcellent DPSK Eye Pattern quality

Product

GPS / GNSS Antenna Signal Splitters

-

INSTOCK Wireless Components, Inc

INSTOCK Wireless Components, Inc

INSTOCK Wireless GPS Signal Splitters are available in 2-way thru 48-way configurations spanning 1-2 GHz with unpeered performance in GPS (L1-L5), GNSS, Galileo, GLONASS, BeiDou, and IRNSS antenna splitting applications. The 200 ohm internal load on the DC-blocked port(s) prevents receivers from incorrectly sensing an antenna fault when there is no current draw. Type N, SMA, TNC, BNC, and QMA connector configurations INSTOCK.

Product

47~862MHz FTTH CATV AGC Optical Receiver

H9112G

-

Hangzhou Huatai Optic Tech. Co., Ltd.

H9112G - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai H9112G, the operating bandwidth of 47~862MHz, Products with high sensitivity optical receiver tube and Huatai special low noise matching circuit,Whether used in analog television or digital television, have high reception sensitivity and excellent intermodulation distortion index. is a low power, high performance, cost-effective triple play, FTTH CATV AGC optical receiver.