Product

Monitoring Receiver

-

Narda Safety Test Solutions

Narda Safety Test Solutions

The portable monitoring receivers and remotely controllable analyzers were especially developed for signal search, radio detection, spectrum monitoring and frequency management.

Product

MIPI Receiver Test Solution

M8085A

-

Keysight Technologies

M8085A - Keysight Technologies

The M8085A is a software plug-in for M8070A Bit Error Ratio Test system software within the M8000 series of BER test solutions. The M8085A software plug-in controls either the M8190A or the M8195A Arbitrary Waveform Generators to create C-PHY or D-PHY standard compliant test signals. In addition it provides routines for calibration of all signal parameters and for all tests specified in the applicable Conformance Test Suite. Together with the additional available DUT control interface it is possible to read the BER of the receiver under test from the M8070A software and display the BER dependency from test parameters within the M8070A user interface.

Product

Dual Channel Digital Receiver

MS 1740

-

Meltronics Systemtech

MS 1740 - Meltronics Systemtech

Dual Channel Digital Receiver is a complete high−frequency dual−channel A/D converter capable of sampling rates up to 210 MHz. It accepts two front panel analog inputs and delivers digital output samples over four FPDP (Front Panel Data Port) connectors utilizing FPDP standards. The Dual Channel Digital Receiver features two 12−bit Analog Devices AD9430 A/D Converters, and two user−configurable Xilinx® Virtex−IV Series FPGAs. It also features a VME A64/D64 slave interface for setting up operating modes and selectable A/D range, and optionally provides 32−bit access from the VMEbus to the FPGAs. It is an ideal system as a high−speed data acquisition front end for real time recording and digital signal processing systems.

Product

Receivers

-

Thorlabs, Inc.

Thorlabs, Inc.

Our selection of ultrafast photoreceivers for telecom applications provide bandwidths up to 40 GHz. They are available as fully operational instruments or in compact, hermetically sealed packages for OEM applications.

Product

1 Channel VGA Over Fiber Transmitter and Receiver Extender

L-1VGA-FE

-

QuestTel

L-1VGA-FE - QuestTel

The QuestTel L-1VGA-FE Fiber Optic Transmitter and Receiver provides long haul transmission of high resolution VGA and Audio control signals over a single fiber up to 20km.

Product

GPS NTP Time Server - SYNTIME

-

Signals & Systems India Private Limited

Signals & Systems India Private Limited

Your product description goes hGPS NTP Time Server (SYNTIME) for Network Time Synchronization is a highly accurate time server. It generates time protocols to synchronize NTP/SNTP clients (Simple Network Time Protocol)/PTP clients (Precision time protocol IEEE 1588) over the network and operates at a speed of 10/100/1000Mbps. The NTP server accepts the time and frequency signals from sources like GPS or GLONASS. It achieves nanosecond accuracy and the system clock operates at stratum 1 when synchronized with time sources. It is a sleek, rack-mountable unit that synchronizes and maintains equipment/device time and avoiding any time drifts due to local RTCs. NTP output from time server supports unicast, broadcast, and multicast methods based on selection and behaves like a reference clock for the network. Apart from time synchronization protocols, it supports MD5 (Security key), SNMP, SSH, HTTP (Configuration), TELNET, FTP, and SYSLOG. IP address of the LAN ports can be field configurable.

Product

40-Pin Signal Block | Receiver Side

-

ATX Hardware GmbH

ATX Hardware GmbH

Receiver pylon block 40-pin signal block / pyramid small (Pk). Material: 6mm EGS619. Spring contact - head shape = pyramid small. Sleeve aligned with WireWrap. Needle projection 4.3mm. Air gap (unwired) 3.18mm. Recommended working stroke: 2.6mm. Max. Rated current 3A.

Product

Receivers

-

GigaCom

GigaCom

Designed to demodulate IRIG destruct tones, this receiver uses an up-converting superheterodyne configuration for high dynamic range and image rejection and has a receive sensitivity of better than -107 dBm. Originally developed to monitor/verify Range Safety Command Destruct Transmitters, it is a compact rugged design usable wherever a high tolerance to shock, vibration and temperature is required.

Product

GPS Antenna Signal Splitter 6 Way, N Type, Passive, L1 & L2, 50 Ohm

GPS600

-

INSTOCK Wireless Components, Inc

GPS600 - INSTOCK Wireless Components, Inc

GPS L1 - L5, GLONASS, Galileo SplitterLow Insertion Loss (0.3 dB avg)High Port to Port Isolation (30 dB avg)Excellent VSWR (1.10 : 1 avg)15 VDC & 75 mA max on DC block portsRoHS Compliant Splitter Construction

Product

IRIG Time Code Receiver & Generator for Computers (PCI Express)

TCR180PEX

-

Meinberg Funkuhren GmbH & Co. KG

TCR180PEX - Meinberg Funkuhren GmbH & Co. KG

The TCR180PEX receives IRIG-A/B/G, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 time codes and can be used for synchronizing the system time of its host PC. The IRIG output of this card can generate an IRIG signal for other IRIG time code readers. The output format is independent from the incoming IRIG signal - a perfect solution to your IRIG conversion requirements. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements) or as an IRIG converter device.

Product

Optical Receiver

-

Sichuan Jiuzhou Electronic Technology Co.,Ltd

Sichuan Jiuzhou Electronic Technology Co.,Ltd

* Return path optional. Frequency splitting according to customer’s need.* 2 RF outputs, level ≥104dBμV when optical input @ -1dBm.* Output level tunable through buttons on front panel.* RF Test Point on front panel.* High quality switch power supply.