GPS Receivers
Use four or more GPS satellites to vector it's location.
-
Product
AINC 429 Multichannel Interface with Additional ARINC-717 Receive & Transmit Channels
DAS-429UNET/RT8-717
Interface Card
The DAS-429UNET/RT8-717 is an ARINC 429, multichannel interface card with additional ARINC-717 receive and transmit channels. Its small size and ability to interface through USB or Ethernet interfaces make it a complete solution for developing, testing and performing system simulation of the ARINC 429 & ARINC-717 bus, both in the lab and in the field.Multiple units can operate via USB ports on the same computer. In addition, multiple units can operate on the same network, by programming each one with a unique IP address, and can be accessed from any computer on the network.The EXC-429UNET/RT8-717 adapter is supplied with C drivers, including source code and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application (only versions 8.1 or higher).
-
Product
Telephone Wire Cable Tester For Testing Continuity With Sender And Receiver
PHCT55
-
The PHCT55 is a two-piece item that tests telephone wire continuity. Play a test tone on one end and listen on the other, judge continuity, and diagnose break points.
-
Product
Tool, Inspection Depth Gauge, Micro Coax, Receiver
910121179
Inspection Tool
Tool, Inspection Depth Gauge, Micro Coax, Receiver
-
Product
Cable Assembly, Receiver, QuadraPaddle, 36", 200 Pin Male LFH w/ M3 Jackscrews
540105080240
Cable Assembly
Cable Assembly, Receiver, QuadraPaddle, 36", 200 Pin Male LFH w/ M3 Jackscrews.
-
Product
Compact Receiver Module
MixAMC-I
-
Virginia Diodes'' standard Spectrum Analyzer Extension Modules (SAXs) provide high performance broadband down-conversion and frequency extension of microwave specturm analyzers into the THz range. VDI now offers integrated MixAMC modules that provide industry leading performance in a compact package. These integrated MixAMC modules are used to down-convert millimeter-wave / THz signals only. Spectrum Analyzer Extension mode is not currently available for the MixAMC-I products. Integrated MixAMC modules utilize a low frequency LO input (<20 GHz) and have a seprate IF output port. Integrated MixAMC modules configured for high IF bandwidth may be available upon request.
-
Product
Cable Assembly, Receiver, 36", TriPaddle, to 25 Pin Female D-Sub
540014010201
Cable Assembly
Cable Assembly, Receiver, 36", TriPaddle, to 25 Pin Female D-Sub
-
Product
Coax, Patchcord, Receiver, 36", Mini Coax, RG316 Tan, Single Ended
7-332116000-036
Coax Patchcord
Coax, Patchcord, Receiver, 36", Mini Coax, RG316 Tan, Single Ended.
-
Product
Cable Assembly, Receiver, 36", TriPaddle, 9 Pin FML D-Sub
540010020201
Cable Assembly
Cable Assembly, Receiver, 36", TriPaddle, 9 Pin FML D-Sub.
-
Product
4 Way Fiber Optic Return Path Receiver (low Optical Input)
MX4RR-LI
-
The MX4RR-LI transforms return optical signals to RF signal output. The standard 1U chassis integrates 4 independent receiver modules, it can receive up to 128 return optical signals from burst mode mini-nodes or services for 128 RFoG optical network units (ONU)-Mini-Nodes.
-
Product
Power, Patchcord, Receiver, 72", Mini Power, 16 AWG White, Single Ended (19 Amps)
7-234916000-072
Power Patchcord
Power, Patchcord, Receiver, 72", Mini Power, 16 AWG White, Single Ended (19 Amps).
-
Product
Instrument Bracket Kit, Receiver, Slide Configuration, For 28" And Longer
310113507
Instrument Bracket
Instrument Bracket Kit, Receiver, Slide Configuration, for 28" and longer.
-
Product
Strain Relief Plate, Receiver, 90 Series
510109298
Strain Relief
Strain Relief Plate works with all 90 Series receiver modules.
-
Product
Mini Coax, Patchcord, Receiver, 36", Mini Coax, RG346 Tan to SMB Plug
7-332116527-036
Coax Patchcord
Mini Coax, Patchcord, Receiver, 36", Mini Coax, RG346 Tan to SMB Plug.
-
Product
PCB Adapter, Receiver, QuadraPaddle, 192 Position, To PCB-Mounted 6x32-Pin Ribbon Cable Headers
510150155
PCB Adapter
PCB Adapter, Receiver, QuadraPaddle, 192 Position, to PCB-Mounted 6x32-Pin Ribbon Cable Headers
-
Product
Electrical Receiver Conformance Test Application for IEEE 802.3bs/ cd
M8091BSCA
-
IEEE 802.3bs receiver test application for 200GAUI-4 and 400GAUI-8, covering chip-to-module, chip-to-chip, backplane, and copper cable interconnects.
-
Product
Cable Assembly, Receiver, TriPaddle, 20", 2 9-Pin Female D-Subs, for RS-232
540127010101
Cable Assembly
Cable Assembly, Receiver, TriPaddle, 20", 2 9-Pin Female D-Subs
-
Product
Cable Assembly, Receiver, TriPaddle, 20”, 6 9-PIN DSUB
540352010101
Cable Assembly
Cable Assembly, Receiver, Tripaddle, 20”, 6 9-PIN DSUB
-
Product
Cable Assembly, Receiver, QuadraPaddle, 36", 78-Pin Female D-Sub
540034010240
Cable Assembly
Cable Assembly, Receiver, QuadraPaddle, 36", 78-Pin Female D-Sub
-
Product
Receiver Semi-Kit
75-NS-3
-
National RF’s 75-NS-3 receiver is a complete super-hetrodyne mini high frequency receiver, designed specifically for the short-wave listener, electronics enthusiast or radio amateur, who wants to use their hands and build a radio. The receiver is offered as a semi-kit in which the electronic assembly is loaded and functionally tested at the National RF facility. The customer must then go to the grocery store (yes…the grocery store!), procure a can of lunch meat, eat it or give it to the dog, and then proceed to drill and paint the can, in order for it to become the receiver’s enclosure! As the name of the preferred potted meat can has a registered trademark by Hormel Foods, Inc., it won’t be mentioned on this web-site. However, the name of the product is synonymous with unwanted email!!! In addition, there are other food products that might be found that are packaged in the same metallic enclosure. Detailed drilling instructions and final assembly instructions are provided as part of the kit. All other parts required for completion of the receiver are provided as well. Recognizing that the finished assembly looked somewhat like the fabled Collins receiver of the ‘60s, the 75S-3, (particularly when the can is painted a light gray) National RF engineers dubbed it (with tongue firmly planted in cheek, of course) the 75-NS-3! Although we have had fun packaging this receiver in a lunch meat can, it is nothing to turn your nose at! Its performance and portability will surprise you, and it is an ideal radio to bring with you on any trip!
-
Product
Dual-Channel, 3.3 GHz To 4.0 GHz, 20 W Receiver Front End
ADRF5515A
-
The ADRF5515A is a dual-channel, integrated RF, front-end, multichip module designed for time division duplexing (TDD) applications. The device operates from 3.3 GHz to 4.0 GHz. The ADRF5515A is configured in dual channels with a cascading, two-stage low noise amplifier (LNA) and a high-power silicon singlepole, double-throw (SPDT) switch.
-
Product
Low Cost Microwave Wideband APD Preamp Receivers
MR11 (40KHz~18GHz)
-
Hangzhou Huatai Optic Tech. Co., Ltd.
MR11 series microwave wideband optical receiver, adopts high Sensitivity APD diode and Low Noise Preamplifier IC, within bandwidth of 40KHz~18GHz, they are featured with excellent linearity, high responsibility and superior flatness of the RF response in both, power and phase. They provide an outstanding linearity fiber optical communication for analogue wideband microwave application. Due to avoidance of using expensive coaxial cable or wave-guide, there will be no limitation in transmission distance, which improves the signal quality and reliability of the microwave communication. They can be widely applied in microwave communication system such as remote wireless, timing and reference signal distribution, telemetry, measurement and delay line etc as well as 10Gb/s high speed communication system.
-
Product
Cable Assembly, Receiver, 20", TriPaddle, 9 Pin FML D-Sub
540010020101
Cable Assembly
Cable Assembly, Receiver, 20", TriPaddle, 9 Pin FML D-Sub.
-
Product
Cable Assembly, Receiver, QuadraPaddle, 36", 68 Pin Male VHDCI
540120010240
Cable Assembly
Cable Assembly, Receiver, QuadraPaddle, 36", 68 Pin Male VHDCI
-
Product
Coax Patchcord, Receiver, Mini Coax, 36", RG316 Tan, To SMA Jack, (1 GHz)
7-332116623-036
Coax Patchcord
Coax Patchcord, Receiver, Mini Coax, 36", RG316 Tan, To SMA Jack, (1 GHz).
-
Product
Cable Assembly, Receiver, TriPaddle, 36", 2 20-Pin Power Connectors
540054040201
Cable Assembly
Cable Assembly, Receiver, TriPaddle, 36", 2 20-Pin Power Connectors.
-
Product
PCB Adapter, Receiver, QuadraPaddle, 192 Position, to PCB-Mounted 1x100 Pin Female SCSI Connector
510150127
PCB Adapter
PCB Adapter, Receiver, QuadraPaddle, 192 Position, to PCB-Mounted 1x100 Pin Female SCSI Connector
-
Product
Receiver, S6, 6 Module, With 20" Platform, For Slide Mount (slide Kit Required)
310122108
Receiver
The S6 Mass Interconnect Receiver is designed to mount to slides in a rack application or directly to a tabletop. It features positive-latching mechanisms and integrated guide pins to create a highly reliable engagement system. The S6 Receiver is very versatile and has module positions screened on top for ease of module placement.
-
Product
Coax, Patchcord, Receiver, 72", Micro Coax, RG316DS Double Shield Tan, SMA Plug
7-368117635-072
Coax Patchcord
Coax, Patchcord, Receiver, 72", Micro Coax, RG316 Double Shield Tan, SMA Plug.
-
Product
Cable Assembly, Receiver, 20", QuadraPaddle, 160 Pin DIN FML , NI PXIe-2525
540069110140
Cable Assembly
Cable Assembly, Receiver, 20", QuadraPaddle, 160 Pin DIN FML , NI PXIe-2525
-
Product
Tool, Extraction, High Power, Receiver and ITA
910112129
Extraction Tool
Tool, Extraction, High Power, Receiver and ITA.
