Centrifuges
-
Product
Laboratory Centrifuges
-
Centrifuge systems are designed for the development, test, evaluation and calibration of accelerometers and a variety of inertial devices. Centrifuges provide a cost-effective solution for simulating high-"G" environments in the laboratory. They support testing of devices such as MEMS-based Inertial Measurement Units (IMUs), low-cost quartz or silicon sensors, Ring Laser Gyros (RLGs), Fiber-Optic Gyros (FOGs), fuzes and crash sensors.
-
Product
Centrifuges
Frontier ™ Series
-
Is a device that uses centrifugal force to separate various components of a fluid.
-
Product
High and Low Temperature Humidity Chamber
GDJS/GDJW
-
•The chamber is produced by SUS304 Steel, the temperature keeping material is produced by Polyurethane hard foam and ultra-fine fibre glass, the doorframe heat insulated by Double high temperature aging silicone rubber door sealing strip. •The temperature controller is used by Korean TEMI display in English/Chinese and German Siemens PLC, it can be communicated to PC via RS-232. The temperature accuracy is 0.1℃ and humidity is 0.1%R.H •The temperature sensor is platinum PT100 Ohms/MV resistor •The heating system is full separately system which produced by Nickel chromium alloy electric heating type heater •The cold system is applied by fully enclosed fan cooled single-stage and cascade refrigeration mode, the compressor is from France TECUMSEH brand which can allow you get after sales support from many countries •The cyclical system is applied by High temperature low noise air conditioning type motor and Multi blade centrifugal wind wheel •The safety self-protection function include Electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection •Working Power: AC380V±10% 3phases and frequency 50Hz/60Hz •Working Environmental: Temperature is 5℃～+30℃ Humidity ≤85%R.H
-
Product
Small/Medium Capacity Type High-Speed Rotation Torque Detector
TH-2000/1000 Series
-
The TH-1000 series torque detectors employ a new magnetic phase difference method with improving functionality while maintaining the advantages of Ono Sokki's conventional torque detectors. They incorporate high durability and long service life---the biggest features of our torque detectors. The new magnetic phase difference method does not require AC power supply to an auxiliary motor for rotation detection change. TH-1000 series is a standard type torque detector with the rotation speed range up to 6000 r/min. The TH-2000 series is a high-speed rotation type which can be used for torque characteristic test of high-speed rotating motor such as an EV/HEV motor, a centrifuge machine or the like. The characteristic data of the detector can be automatically set up on the TH-5100 torque meter when power is turned on.
-
Product
Pumps
-
Our broad range of pumps and fluid system components for laboratory, analytical, and industrial process applications includes peristaltic pumps, positive displacement pumps, metering pumps, centrifugal pumps, and more. And we don’t stop with the pump, we also offer the tubing, fittings, filters, regulators, flowmeters, and gauges to complete your fluid handling system.
-
Product
Pump Testing in Repair and Maintenance
-
Test field for dry installed and submerged centrifugal pumps as acceptance test field in maintenance
-
Product
Tachometers/Stroboscopes
-
Shenzhen Graigar Technology Co.,Ltd.
Used to calibrate or check the speed of centrifuges and other equipment that rotates or vibrates.
-
Product
Acceleration (Centrifuge) Testing
-
Environment Associates provides centrifuge equipment for acceleration testing. Our acceleration testing equipment measures 3 ft. (0.91 m) and a 6 ft. (1.82 m) lengths that provides constant accelerations of 50 Gs and can handle payloads of 20 lbs. to 50 lbs. The Acceleration Testing is also called G-Force Testing
-
Product
Stroboscopes
-
STROBOSCOPE/TACHOMETER that is ideal for inspecting and measuring the speed of movinggears, fans, centrifuges, pumps, motors and other equipment used in general industrial maintenance,production, quality control, laboratories and as well as for schools and colleges for demonstratingstrobe action.
-
Product
Pump Testing Panel
VPTP
-
It covers No Load Test, Block Rotor Test, Pump Performance Test, Reduced Voltage Test for Submersible Pump, Monoblock Pump & Centrifugal Pump etc. Direct measurement of Voltage, Current Active Power, Power Factor (PF), Apparent Power, Frequency, Head, Suction, Discharge, RPM, Corrected RPM, %Slip.
-
Product
Centrifugal Nanoparticle Analyzer
Partica Centrifuge CN-300
-
With a measurement range of 10 nm - 40 μm, the Partica CENTRIFUGE CN-300 applies centrifugal force of up to 30,000g and uses temperature control to produce accurate measurement results for a variety of samples.Developed based on customer feedback and improving upon existing and new HORIBA technologies, the result is an analyzer that provides safe and reliable operation while also being easy to use.
-
Product
DUST CHAMBERS
EDC Series
-
Free-flow dust circulation centrifugal blower.Uniform floating dust simulation across the test space.Dust pre-heating mechanism for free flow of the dust.Hopper re-vibration for free fall of settled dust.Blower speed regulation to ensure metered uniform dust floating inside the test space.Oil-free vacuum pump to simulate negative pressure for IP6X test.Volumetric air-flow meter/counter for IP6X test.View window with illumination.User-friendly Multi-function programmable timer.
-
Product
Pump Testing with NPSH Measurement
-
Test field for centrifugal and side channel pumpsfor split-case pumps or as a complete unit with customer engine.*Open tank system for recording QH characteristics*Vacuum-resistant container for NPSH measurements*Three flexible test cars with height-adjustable test motors: 5/30/90 kW
-
Product
Production Testing of Centrifugal Pumps
-
Measurements taken:*Aufmahne of QH and NPSH characteristics*Endurance tests*Vibration and temperature measurements*Speed and viscosity conversion*Creation of characteristics from existing data pool
-
Product
Mechatronics
-
MERA performs design, construction, supply, installation and certification of stands for various testing types:● static loading● dynamic and life-cycle● transporting testing (vibration table)● thermal testing● centrifuges● modeling of take-off, landing modes, etc.
-
Product
Bearing And Surface Temperature Sensors
-
Can be used to monitor temperature on a wide range of industrial machinery including conveyors, bucket elevators, motors, gearboxes, pumps, turbines, fans, curing ovens, centrifuges, agitators and hammer mills.
-
Product
Acceleration Testing
-
The acceleration test is performed on a centrifuge to assure that material can structurally withstand the steady state inertia loads that are induced by platform acceleration, deceleration, and maneuver in the service environment, and can function without degradation during and following exposure to these forces. Acceleration tests are also used to assure that material does not become hazardous after exposure to crash loads. The acceleration test method is applicable to material that is installed in mobile platforms such as aircraft, helicopters, aerospace vehicles, air-carried stores, ground-launched missiles, trains, ships, automotive vehicles, etc.
-
Product
Centrifugal FFF
CF2000
-
The advanced Postnova CF2000 Series was developed to become the first professional modular Centrifugal FFF system available. It is completely controlled by the NovaFFF single software platform which runs the entire system from autosampler to detectors.
-
Product
Centrifuges
-
Low-Speed Centrifuges, High-Speed Centrifuges, Refrigerated Centrifuges, and Hematocrit Centrifuges
-
Product
Centrifuge
Frontier™ 5000 Series Mini
-
Is a small but powerful mini centrifuge for simple and quick liquid separation.
-
Product
Tachometers
-
Labs use this high accuracy unit to check speeds of centrifuges, motors, or stirrers. Five digit LCD is a vivid ½-inch high display. Tachometer takes only three seconds for most readings. A unique memory feature permits recalling the highest, lowest, and last reading. Unit is extremely easy to use; operation may be learned in one minute. One end of the unit provides contact readings with a rotating spindle.
-
Product
Aircraft Instrument Test Equipment
-
Centrifuge systems are designed to apply a large centrifugal force to a payload. While this can also be accomplished with a single axis motion simulation table system, a centrifuge is typically required for applications with larger payloads and/or higher g requirements. Ideal Aerosmith’s line of centrifuge systems is used for a broad range of g-testing applications, testing payloads up to 200 lbs (91 Kg) and 1,000 g s.
-
Product
DPiMS™-8060 Method Package For Rapid Toxicology Screening Ver.2
-
With the DPiMS-8060, time-consuming pretreatment steps associated with forensic samples are almost completely eliminated. Begin analysis after only simple dilution and centrifugation steps. The DPiMS-8060 is therefore extremely well-suited for mass analysis via rapid screening.
-
Product
Non-standard Constant Acceleration Tester
KRD32 series
-
KRD32 series non-standard constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal motion, dual environmental force centrifugal motion and central high-speed rotating motion.
