Engine Tachometers
See Also: Tachometers, Tachometer Testers
-
Product
Test Engineering
-
With a thorough knowledge of various internet connectivity products, Xebrium’s team of Software Engineers, Network Engineers, and Test Engineers are relied upon to implement and rigorously test networking and wireless product.
-
Product
Optical and Contact Tachometers
-
PeakTech Prüf- und Messtechnik GmbH
Provides a fast and accurate measurement of the speed and surface speed of rotating objects. Through the contactless or with the measuring adapter for measurements by direct contact to the object to be measured, various speeds can be determined and recorded.
-
Product
Engine Dynamometer
DX35-HS
-
Power: 1,250 hp (932 kW)Torque: 4,021 lb-ft (5,452 Nm)Speed: 6,000 rpmWater Use*: 91 gpm (344.5 lpm)Inertia Value**: 101.6 lb·ft2 (4.3 kg·m2)Shipping Weight: 2,043 lb (927 kg)Rotation: bi-directional
-
Product
Engine Simulator
MS 1118
-
Test Set-A calibration unit is a test jig is used to simulate parameters of Adour 804E and 811 engines of Jaguar aircrafts. It simulates current, voltage, speed, and turbine gas temperature. It performs NL Check, NH Check, TGT1 (Non T2 Compensated), TGT2 (T2 Compensated), Amp (Non T2 Compensated), Amp (T2 Compensated), Solenoid Volt, TGT Inject, NL Inject, and NL/TGT Redatum.
-
Product
Architectural Engineering Solution For Sustainable Buildings
-
Tejjy offers comprehensive architectural engineering services tailored to project’s need. From planning and design to engineering expertise, we ensure a seamless journey from inception to completion. Our architectural team excels in site analysis, space optimization, crafting functional and aesthetic designs for urban planning, property management, landscape architecture, infrastructure planning, horizontal and vertical design planning.
-
Product
Software Engineering Services
-
From the many phases of software engineering, designing, building, testing, implementation, interfacing, and support, enGenius has an expert team and network of highly-vetted partners ready to accommodate projects and programs, both large and small. From the vast list of possible requirements, including web applications, architecture, requirements analysis, network security, and recovery and restoration, enGenius has trusted knowledge management resources for state-side and global projects.
-
Product
Engines
-
Honeywell Aerospace Technologies
Since 1953, Honeywell engines have been at the forefront of aircraft propulsion. Today, we continue to shape technological progress in the realms of local, international, agricultural and military aviation.
-
Product
Engine Test Adapters
-
Atec has built test adapters for a wide variety of engines from high bypass fan engines to small APU engines. Testing a new engine type in your existing jet engine test cell can be challenging, and upgrade modifications will be needed. Atec does not view an adapter as just a mechanical weldment that simply mates the engine to the aeroengine thrust stand. Our engineers realize that additional items will be needed in the facility to insure total project success. During the planning phase, Atec engineers can visit your existing facility and/or review videos to make a comprehensive assessment of the integration needed to add a new engine type to your testing facility. Atec can perform airflow, acoustics, FEA and sub systems analyses to ensure that any new engine added to your jet engine test cell will have the proper capacity to perform properly. Vital Link’s current experience with advanced fighter engines test adapter kits further bolsters our expertise in high thrust engine test handling.
-
Product
DIGITAL TACHOMETER
IBL-DT2235A
-
International Biological Laboratories
This is a Digital Hand Held Contact type Tachometer and has Micro Computer LSI Chip
-
Product
Tachometers
-
Precision Mastech Enterprises Co.
.An instrument that measures the rotational speed of an engine or shaft
-
Product
Digital Tachometer
TAC-L
-
Model TAC-L Portable Digital Tachometer measures rotational speed either by contacting a rotatable head to the shaft of the object, or using photo sensor to detect the reflections from the laser. The laser target can record from a distance of up to 20 inches and gives a more accurate measurement than LED targeting. Model TAC-L includes a large LCD with a backlight for use in dark areas.
-
Product
Functional Test for Engineering Lab
Spectrum BT
Functional Test
Designed to meet the needs of product engineering labs, production lines, test development centers, and repair depots, the Spectrum BT is a configurable and scalable functional test system. This focused system solves typical functional test coverage challenges throughout the defense/aerospace product life cycle—and it’s upgradable as test requirements evolve.
-
Product
Tachometers, Counters & Displays
-
Displays Include; Rate, Time In Process, Product, Sum, Difference, Ratio, Draw Process, Batch, or Total Counting. Field Adjustable, Full Diagnostic Functions. Built-In Relay Testing Capabilities. Highly Programmable. Single-Channel or Bi-Directional Counting. Setpoint and Start Delay Functions. Multiple Relay and Analog Output Options. Keypad Lockout
-
Product
Engineering Data Analytics
-
ESI’s Data Analytics solution platform INENDI is a specialized set of solutions that combines state of the art Engineering Data Analytics and management approaches, intuitive visualization and efficient investigation methodologies to allow for a fast discovery of the unknown in large high-dimensional datasets.With INENDI, ESI brings its long-standing innovative capability and its expertise in designing solutions tailored for professionals who need to solve difficult high-value problems into the Cyber Security market.
-
Product
Test Engines
-
Verified Systems International GMBH
The test system cluster architecture is based on dual CPU or 4-CPU PCs acting as cluster nodes. The nodes communicate and synchronise over a high-speed network (Myrinet or InfiniBand). A modification of the Linux operating system allows to run the test execution and evaluation algorithms in hard real-time on reserved CPUs, where scheduling is non-preemptive and controlled by the test system itself. The interrupts caused by interfaces to the system under test may be relayed to CPUs designated explicitly for their handling. This approach offers the opportunity to utilise high-performance standard hardware and the services provided by the widely accepted Linux operating system in combination with all mechanisms required for hard real-time computing. The cluster architecture presents an opportunity to distribute interfaces with high data throughput on different nodes, so that PCI bus overload can be avoided. In addition, the CPU load can be balanced by allocating test data generators, environment simulations and checkers for the behaviour of the system under test ("test oracles") on dedicated CPUs.
-
Product
Engineering and Tooling
-
Independent Testing Laboratories
Full design and machine shop for custom and complex fixtures and tooling
-
Product
AC Engine Dynamometer
DA100
-
Power: 100 hp (74.6 kW)Torque: 175 lb-ft (237.3 Nm)Maximum Speed: 8,500 rpmConstant Torque Range: 0 - 3,000 rpmConstant Power Range: 3,000 - 5,100 rpmDecreasing Power Range: 5,100 - 8,500 rpmRotation: bi-directional
-
Product
3D Scanning Reverse Engineering Services
-
Reverse engineering is oftentimes a catch-all term used for many design and engineering applications. But trust us, there is so much more to this category for the uses of our 3D scanners, portable CMMs and laser trackers. Also, reverse engineering tends to imply that the 3D scanning will be used solely for product design, when in fact it can be used to address many other engineering functions such as:
-
Product
Engineering Lab Stations
-
Engineering Lab Stations provide an all-in-one solution to engineering education by combining hardware, software, and courseware to give real hands-on experience to students in electronics, mechatronics, and communications courses.
-
Product
4-Ch, 24-Bit, 192 KS/s USB 3.0 I/O Module For Sound And Vibration (With AO And Tachometer)
USB-5801
-
USB 3.0 SuperSpeed and daisy chainable by built-in USB hub4x simultaneously sampled analog inputs, up to 192 kS/s24-bit resolution ADCs with -94 dB total harmonic distortion plus noise (THD+N)Built-in anti-aliasing filter2 mA integrated electronic piezoelectric (IEPE) excitation currents2 analog outputs with update rate up to 192 kS/s24-bit resolution DACs with -90 dB total harmonic distortion plus noise (THD+N)2 tachometer inputs for period or frequency measurement4-ch isolated digital input and 4-ch isolated digital output
-
Product
Engine Dynamometer
DH23
-
Power: 805 hp (615 kW)Torque: 1,275 lb-ft (1,729 Nm)Speed: 4,500 rpmWater Use*: 60 gpm (227.1 lpm)Inertia Value: 11.4 lb·ft2 (0.48 kg·m2)Shipping Weight: 475 lb (215 kg)*No Cooling System
-
Product
Engine Dynamometer
DE30
-
Power: 40 hp (30 kW)Torque: 70 lb-ft (95 Nm)Speed: 14,000 rpmWater Use*: 10 gpm (37.9 lpm)Inertia Value: 0.40 lb·ft2 (0.0168 kg·m2)Shipping Weight: 1,213 lb (550 kg)Rotation: bi-directional*No Cooling System
-
Product
Engine Dynamometer
DS4010-HS
-
Power: 3,500 hp (2,611 kW)Torque: 11,875 lb-ft (16,100 Nm)Speed: 4,000 rpmWater Use*: 255 gpm (965.3 lpm)Inertia Value**: 290.8 lb·ft2 (12.3 kg·m2)Shipping Weight: 4,620 lb (2,097 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
Product
Hydraulic testing solutions for Engineering Components
-
The unit illustrated to the left here allows automatic pressure testing of gas cylinders to BS and DOT standards. The system includes automatic weighing, filling, testing to 500 bar with expansion measurement, and full mechanical handling for up to 180 gas cylinders per hour.
-
Product
Tachometers
HH100
-
The HH100 Hand-Held Digital Tachometer combines both contact and non-contact sensing to accurately measure RPM, surface speed, and length. When using the non-contact mode, rotational speed (RPM) is measured using a visible beam of light. The HH100 can be up to 14 inches away from the small piece of reflective tape that is affixed to the rotating element.
-
Product
Laser Tachometer
LT-880
-
The LT-880 Laser Tachometer is a non-contact instrument designed to sense the presence or absence of a reflective surface in its optical beam. A TTL signal is asserted whenever a reflective surface is placed within its field of view. The signal may be used with a counter or spectrum analyser to sense linear translation, rpm or transient vibrations.
-
Product
Electronic Engine Controls - FADEC
-
The EMC-100 is dual channel Full Authority Digital Engine Control (FADEC) system, designed for helicopter turboshaft engines. The electronic control unit’s (ECU) primary channel provides precise engine power management and rotor speed control throughout the operational range of the engine. The reversionary backup channel provides full mission capability should a primary system failure occur.
-
Product
Engine Dynamometer
DX36-HS
-
Power: 1,500 hp (1,119 kW)Torque: 4,825 lb-ft (6,542 Nm)Speed: 6,000 rpmWater Use*: 109 gpm (412.6 lpm)Inertia Value**: 121.6 lb·ft2 (5.1 kg·m2)Shipping Weight: 2,240 lb (1,016 kg)Rotation: bi-directional
-
Product
Engine Dynamometers
-
SuperFlow manufactures water brake, eddy current and AC engine dynamometers for performance and industrial applications. SuperFlow engine dynos test gasoline, diesel and CNG engines and several of our water brake dynos are used for AC motor testing.
-
Product
Functional Testing and Test Engineering
-
Customer-supplied or developed in-house• Ruggedization of existing (lab-built) fixtures• Co-develop hardware/software• Deployment, implementation, and training• Engineering evaluation tools• Design verification• Medical device evaluation• Manufacturing test systems• Verification test systems• Go/No-go tests• Serialization, recordkeeping, and datalogging• Troubleshooting failed units with other test platforms
