Engine Tachometers
See Also: Tachometers, Tachometer Testers
-
Product
Engine Dynamometer
DX38
-
Power: 2,000 hp (1,491 kW)Torque: 6,434 lb-ft (8,723 Nm)Speed: 4,000 rpmWater Use*: 145 gpm (548.9 lpm)Inertia Value**: 160.7 lb·ft2 (6.8 kg·m2)Shipping Weight: 2,634 lb (1,195 kg)Rotation: bi-directional
-
Product
Engine Dynamometer
DS48-HS
-
Power: 2,883 hp (2,149 kW)Torque: 9,500 lb-ft (12,880 Nm)Speed: 4,000 rpmWater Use*: 201 gpm (760.9 lpm)Inertia Value**: 231.6 lb·ft2 (9.8 kg·m2)Shipping Weight: 3,740 lb (1,696 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
Product
JETCAL®1 Engine Analyzer
BH112JD Series
-
The BH112JD JETCAL® Engine Analyzer providesa superior combination of capabilities in aruggedized, portable test set.
-
Product
Tachometer & Anemometer
-
ZhangZhou Weihua Electronic co.,ltd
a Tachometer (measure RPM of turbine blades) and an Anemometer (measures wind speed).
-
Product
Automatic Transmission & Engine Oil Pressure Tester with 2 Gages
34580
-
Check oil pressure in automotive transmissions and engines. Adapters provide coverage of most domestic and imported cars and light trucks. Includes two gages: Large Gage calibrated from 1-600 PSI (0-4,000 kPa & 0-7.0 BAR) and Small Gage for lower pressure requirement 0-50 PSI (0-3.5 BAR) Large gage can be used for all applications and has hang-up hook. Small gage is for more accurate reading of engine oil pressure where maximum oil pressure does not exceed 50 PSI (3.5 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Supplied with instructions in a molded plastic case.
-
Product
Reciprocating Engines
-
GE’s gas engines range in power from 0.12 to 9.5 MWe. Our Jenbacher and Waukesha engines are recognized the world over for their performance and reliability, and our new diesel generator set delivers unmatched fuel efficiency, extended preventative maintenance intervals, the longest overhaul intervals and the longest design life available for high-speed diesel engines.
-
Product
Portable Engineered Test Cell
PET
-
PET is an innovative portable engine test cell. Most test cells are designed by an architect and built of conventional materials like bricks and mortar, making the cells immovable and inadaptable to changing requirements. Emprise has developed a practical alternative to this PET a portable and modular engine and component test cell.
-
Product
AC Engine Dynamometer
DA750
-
Power: 750 hp (559 kW)Torque: 2,626 lb-ft (3,560 Nm)Maximum Speed: 3,000 rpmConstant Torque Range: 0 - 1,500 rpmConstant Power Range: 1,500 - 2,600 rpmDecreasing Power Range: 2,600 - 3,000 rpmRotation: bi-directional
-
Product
In-Circuit Testing and Test Engineering
-
5184 Test NodesHPUX or Windows60 Mhz ASRU Frequency Counter, Timer10 Mhz Clock, 6 Mhz data ratesVector Test for VLSI, PLCC & ASICSTestjet and VTEP Vectorless TestingAdvanced Boundary ScanSilicon Nails AvailableSeries V upgradeable
-
Product
EZ-Tach Digital Automotive Tachometer
325
-
The EZ-Tach makes RPM measurements quick and easy. This is a very useful tool for tune-up and other diagnostic work where accurate RPM readings are required. Just clamp over any spark plug wire and get accurate RPM on conventional or DIS ignition systems. The unit also features a data hold function. The large 2000 count LCD display shows; RPM, function, data hold indication and low battery indication. The EZ-Tach is powered by one 9 volt battery. Battery and instructions are included.
-
Product
Engine Speed Control and Measurement (Test Set A)
MS 1100
-
*Checks the parameters such as current, voltage, speed, and turbine gas temperature of 804E and 811 engines Portable instrument*Testing of Automatic engine control system and after burner control system*Simulates the temperature signal derived from the engine TGT (Temperature Gas Turbine) thermocouples*Simulates the speed signal, NL (low pressure shaft speed signal) drive from the L.P shaft Probe*Indicates the current signal to the FCU solenoid derived from the engine control amplifier*Measure the TGT and NL simulated signal at static position*Measure the signal produced by the engine TGT thermocouples*Measure the NL signal produced by the LP shaft*Measure the NH (High-pressure shaft speed) signal produced by HP shaft*Indicates the solenoid current, produced by the engine control amplifier*Indicates the solenoid voltage, produced by the engine control amplifier*Used to test engine in both static and dynamic states
-
Product
Engine Dynamometer
DE350
-
Power: 469 hp (350 kW)Torque: 1,180 lb-ft (1,600 Nm)Speed: 8,000 rpmWater Use*: 66 gpm (249.8 lpm)Inertia Value: 21 lb·ft2 (0.873 kg·m2)Shipping Weight: 3,307 lb (1,500 kg)Rotation: bi-directional*No Cooling System
-
Product
Tachometers
HH100
-
The HH100 Hand-Held Digital Tachometer combines both contact and non-contact sensing to accurately measure RPM, surface speed, and length. When using the non-contact mode, rotational speed (RPM) is measured using a visible beam of light. The HH100 can be up to 14 inches away from the small piece of reflective tape that is affixed to the rotating element.
-
Product
Engine Vibration Measurement Unit
MS 1101
-
Used to check engine vibration level. The seismic transducer mounted on both engines. Used for the measurement of vibration levels for various engine rpm. Used for the measurement of amplitude on each frequency component
-
Product
Test Engines
-
Verified Systems International GMBH
The test system cluster architecture is based on dual CPU or 4-CPU PCs acting as cluster nodes. The nodes communicate and synchronise over a high-speed network (Myrinet or InfiniBand). A modification of the Linux operating system allows to run the test execution and evaluation algorithms in hard real-time on reserved CPUs, where scheduling is non-preemptive and controlled by the test system itself. The interrupts caused by interfaces to the system under test may be relayed to CPUs designated explicitly for their handling. This approach offers the opportunity to utilise high-performance standard hardware and the services provided by the widely accepted Linux operating system in combination with all mechanisms required for hard real-time computing. The cluster architecture presents an opportunity to distribute interfaces with high data throughput on different nodes, so that PCI bus overload can be avoided. In addition, the CPU load can be balanced by allocating test data generators, environment simulations and checkers for the behaviour of the system under test ("test oracles") on dedicated CPUs.
-
-
Product
Embedded Engineering Solutions
-
Our engineering solutions support the development of safety-critical embedded systems. We support systems, hardware and software engineering, software V&V including multicore timing analysis, the development of efficient automated test environments, and develop custom tools to meet verification needs.
-
Product
Integrated Board Power Management Functions For The Forward Thinking Engineer
Power Manager II
-
*Up to 12 differential voltage sensors with immunity to noise on ground plane*Voltage trimming to within 1%*Ruggedized CPLD with up to 48 macrocells for sequencing and supervisory signal logic*Large operating power supply range (3.3 V + 20% to 3.3 V -15%)*Up to 4 High-Voltage MOSFET Driver Outputs*Voltage Measurement with 10-bit ADC through I2C*Up to 8 On-chip DACs for Margining and Trimming
-
Product
Engineer Innovation
Simcenter
-
Siemens Digital Industries Software
Engineering departments today must develop smart products that integrate mechanical functions with electronics and controls, utilize new materials and manufacturing methods and deliver new designs within ever shorter design cycles. This requires current engineering practices for product performance verification to evolve into a Digital Twin approach, which enables to follow a more predictive process for systems driven product development.
-
Product
Engine Test Systems
Dynas3
-
Dynas3 Machines are specially suited for use in engine test stands. The AC machine, variable frequency drive with test stand controller and safety module are tuned to one another to form a system that has proven itself many times over. It can be used in any type of development and function test stand. The applications range from simple test stands for steady state operation up to sophisticated test stands for dynamic test cycles. Nearly every application in the field of engine testing can be performed on a test stand with DYNAS3.
-
Product
Engine Test
-
The engine test bench is a facility used by engine manufacturing plants to validate internal combustion engines before fitting to the vehicle. OEMs perform ‘Hot’ or ‘Cold’ testing operations in order to measure several physical variables and to diagnose any failure of parts or components. Jackmark Engineering provides bespoke rugged electrical test connection leads suitable for the industrial environment of petrol or diesel engine testing.
-
Product
AC Engine Dynamometer
DA351
-
Power: 351 hp (261.7 kW)Torque: 921 lb-ft (1,248.7 Nm)Maximum Speed: 5,600 rpmConstant Torque Range: 0 - 2,000 rpmConstant Power Range: 2,000 - 3,600 rpmDecreasing Power Range: 3,600 - 5,600 rpmRotation: bi-directional
-
Product
Engine Dynamometer
DX31-HS
-
Power: 250 hp (186 kW)Torque: 804 lb-ft (1,091 Nm)Speed: 6,000 rpmWater Use*: 19 gpm (72 lpm)Inertia Value**: 23.3 lb·ft2 (0.98 kg·m2)Shipping Weight: 1,254 lb (569 kg)Rotation: bi-directional
-
Product
EZ Tach +Plus Automotive Tachometer
328
-
*Versatile instrument can measure RPM on a wide variety of engines from string trimmers to automotive. *Reads engine revolutions from 0 to 20,000 RPM *Picks up RPM signal wireless or with supplied inductive pickup *Great for setting idle speeds! *Built-in LED Flashlight which can be used while taking measurements *Backlit LCD display *Accuracy +10 RPM
-
Product
AC Engine Dynamometer
DA670
-
Power: 670 hp (500 kW)Torque: 2,010 lb-ft (2,725.2 Nm)Maximum Speed: 4,500 rpmConstant Torque Range: 0 - 1,800 rpmConstant Power Range: 1,800 - 3,000 rpmDecreasing Power Range: 3,000 - 4,500 rpmRotation: bi-directional
-
Product
Pro Laser / Contact Tachometer
333
-
Dual function Laser Photo & Contact tachometer with 12 different measurement types. Laser method allows for longer detection distance, up to 6 feet away. Contact function adds distance and frequency measuring to the unit's capability.
-
Product
Digital Tachometer - Non Contact / Contact / Non Contact & Contact
MODEL - KM- 2234BL / KM 2235 B / KM 2241
-
Kusam Electrical Industries Limited
Digital Tachometer uses latest technology for accurate measurements. It has Exclusive one chip of Microcomputer LSI Circuit, It is housed in tough ABS case & has ergonomic design for easy holding in the hand.
-
Product
Engines
-
Honeywell Aerospace Technologies
Since 1953, Honeywell engines have been at the forefront of aircraft propulsion. Today, we continue to shape technological progress in the realms of local, international, agricultural and military aviation.
-
Product
In-Circuit Testing and Test Engineering
Teradyne Z1890
-
2048 Pure Pin Test Nodes3 & 6-wire Analog MeasurementsVector Test for VLSI, PLCC’s & ASICSMultiscan II Vectorless TestingIEEE Functional Interface BoardLarge Custom Vector Library
-
Product
Engine Dynamometer
DE500
-
Power: 670 hp (500 kW)Torque: 2,213 lb-ft (3,000 Nm)Speed: 7,500 rpmWater Use*: 90 gpm (340.7 lpm)Inertia Value: 52 lb·ft2 (2.196 kg·m2)Shipping Weight: 4,740 lb (2,150 kg)Rotation: bi-directional*No Cooling System
