Test Management Software
See Also: Test Management, Test Management Applications, Test Management Solution, Test Management Suite, Test Management Tools, Test Executive Software
-
Product
RF-Antenna Communication Links Functional Test
Functional Test
The application encompasses functional tests of very large quantities of automotive antenna amplifiers, plus parallelization of tests by implementing several test stations in a rotary indexing table. The DUTs are inserted manually and after final assembly, they are loaded into the rotary table; this requires manual triggering by the operator.
-
Product
Design for Testability (DFT Test)
test
Corelis can provide you with design consultation and an analysis of your design for boundary-scan testability. We will review your design and make specific recommendations that if implemented will improve the testability. We can also suggest improvements that will increase test coverage and allow boundary-scan to be implemented in a more cost-effective manner.This service also includes a DFT test coverage analysis that we recommend to do after schematic capture and before PCB layout. At this stage of product development, Corelis provides you with a comprehensive test coverage reports that identifies all of the boundary-scan nets and pins and classifies them as completely tested, partially tested, or not tested. The report also recommends where to add test points (pads) for physical “nails” access if additional test coverage is required.
-
Product
Environmental Control System Test Platform
Test Platform
The Airframe Environmental Control System Test Platform provides a hardware-in-the-loop (HIL) closed-loop test environment for dynamic and maintenance testing of cockpit and cabin environmental control systems for airframes. The system simulates a military or commercial airframe cabin, including sensors and actuators from the control system and the passengers. The system delivers repeatable, cost-effective testing in a fraction of the time needed with typical in-house simulation systems.
-
Product
Generator/Analyzer for NFC/EMVCo Manufacturing Test
Micropross MP500 PT1-NFC
test
Support for ISO 14443 A/B, ISO 15693, MIFARE™, FeliCa™. Measurement correlation with NFC Forum and EMVCo certification test bench. Automated test executive with ready-to-run test sequences. Reader/Writer and Card Emulation modes, resonance frequency measurements supported on same antenna. Embedded analog measurements - LMA, field strength, S11, Q factor, waveform characteristics. Physical parameter/waveshape characteristic definition
-
Product
Test Data Management Services
-
TDM Service has been designed to help you with data creation, management, and protection to keep your business compliant with all legal regulations without sacrificing expediency or quality.
-
Product
HTOL Test Systems
Test System
Our IOL & Power-Cycling systems increase measurement quality & throughput while simultaneously reducing the Total Cost of Test (TCoT) of an open platform. We focus on complete monitoring and precise temperature control for each device under test.
-
Product
RSE Wireless EMC Spurious Emission
TS8996
Test System
The R&S®TS8996 RSE test system is designed for EMI and radiated spurious emission testing on wireless devices in semi-anechoic or fully anechoic chambers. The modular design makes it easy to extend the system to include new communications technologies. Typical devices under test include mobile phones or radio sets along with radiated measurements of other short-range devices. Standards require a wide range of test setups and a wide and high frequency range (up to 40 GHz). ESW or FSW frequency ranges are extended up to 325 GHz with option B21 using receive units TC-RSE for 5G FR2. Dedicated RSE test routines are also covered for this frequency range.
-
Product
Parallel Electrode SMD Test Fixture
16192A
Test Fixture
The 16192A test fixture is designed for impedance evaluations of side electrode SMD components. The minimum SMD size that this fixture is adapted to evaluate is 1(L)[mm].
-
Product
Dissolution Software for Enhanced Data Management
-
Agilent dissolution software systems enable more effective management and analysis of dissolution data, while ensuring ongoing regulatory compliance. Our dissolution testing data systems integrate analysis and sampling and provide real-time access to test status and simultaneous control of multiple systems.
-
Product
Data Management Software Suite
-
The Data Management Software Suite includes DIAdem, DataFinder Server, and the Analysis Server to provide a complete enterprise solution for quickly finding, analyzing, and reporting measurement data.
-
Product
Application Software for Electronic Test & Instrumentation
test
Application software provides configuration-based workflows for electronic test and instrumentation applications. Application software is part of the NI software portfolio.
-
Product
Interactive Benchtop Test
test
Strict time-to-market deadlines make it vital to efficiently debug and validate product designs. Virtual instrumentation provides a unified interface that gives engineers an advantage over traditional box instruments.
-
Product
Calibration Management Software
MET/CONNECT™
-
Calibration Management Software through Fluke Calibration MET/CONNECT™ Qualer is a premier asset, maintenance and calibration management system providing a pre-configured, business-in-a-box, best in class, software solution for progressive companies. Fluke Calibration’s MET/CAL® is the leading calibration automation software platform, allowing calibration labs to harness the power of thousands of automated procedures. Qualer and MET/CAL® can now be connected through Fluke Calibration's MET/CONNECT™ integration app. This enables labs to leverage the power of MET/CAL® procedures and provide the results seamlessly to Qualer as their system of record. Qualer's partnership with Fluke Calibration and MET/CONNECT™ provides a seamless way to integrate the two platforms and bring the benefits of automated calibration into the Qualer platform.
-
Product
Battery Management LEM BMS Software
CELLooK
-
LEM is the latest and most advanced Battery Cell Monitoring System. The CELLLook is the web-based Software that could monitor, diagnose and analyze the Battery cell capability by an internet access. (Developed DB engine in Korea and registered a trade mark). The auto alarm, diagnostic and analyzing software for all Microguard data that Jaeshininfomation Co., Ltd with Web2.0 solution.
-
Product
COM-HPC Server Type Ice Lake-D Starter Kit
Software Development Kit
The COM-HPC Server Type Starter Kit consists of a COM-HPC Server Type module, memory, and thermal solution of your choice with an extended ATX size COM-HPC Server Type reference carrier board, as well as necessary cabling. It allows you to quickly emulate the functionality of your end product for software development and hardware verification. Carrier board design files (schematics, mechanical drawings), COM-HPC module drivers, BSP, and user manual are also offered to aid you in designing your own custom carrier board.
-
Product
6TL24 Combinational Base Test Platform
H71002400
Test Platform
The 6TL24 is the Base platform ideal for Combinational test (ICT+FCT) in low to mid volume, high-mix electronics productions. A dual-stage pushing mechanism will allow performing both, the FCT and the ICT test, without the need of changing the test platform and with a low cost fixturing technology. To do so, the exchangeable cassette fixture must be designed with two-level probes. IN the 6TL24, the second level is reached thanks to a pneumatic actuator.
-
Product
Test Automation Software for Laboratory Management
STARS ENTERPRISE
-
STARS ENTERPRISE is a completely new generation of software from HORIBA, consisting of innovative web and mobile apps in a cloud-based platform. It enables you to seamlessly and completely integrate all your measurement systems, test beds and specimens, as well as on-board systems in the laboratory or in mobile road tests. The numerous apps in the STARS Enterprise system offer you a universal, flexible and scalable software solution for accomplishing your entire test automation activities, today and into the future.
-
Product
Gas Detection Management Software
iNet® Control
-
iNet® Control is gas detection management software that provides unparalleled visibility into your gas detection program. Now you can easily manage your hazards, people, and equipment from anywhere with one simple dashboard. For DSXi Docking Station customers, access to iNet Control is included at no additional charge.
-
Product
Quality Management Software
QMan
-
The Paperless Repair software QMAN is a powerful quality management system. It helps achieve higher quality assurance, reduce production costs and shorten repair time – regardless of which test system you are using.
-
Product
Isolated Digital I/O 60VDC, 150mA
OTP2 module no.186
Test Platform
The National Instruments PXI-6528, PCI-6528, and PXI-6529 Digital I/O Modules are isolated digital I/O interfaces for PCI and PXI. These modules can use inputs from NI 6528 and PXI 6529 devices to capture the status of sensors, actuators, and logic devices. NI 6528 devices have 24 SSR outputs for switching external devices with input currents up to 150 mA. The NI 6528 and PXI-6529 devices are suitable for a variety of applications, from automotive development and industrial factory automation to aerospace, laboratory research, and biomedical applications due to their high current handling capacity and isolation.
-
Product
NVMe Testing Software
IOL INTERACT™
-
IOL INTERACT™ software expedites and automates the testing of NVMe SSDs and NVMe-oF products. It is used to test products for inclusion on the NVMe Integrator's List. Members of the UNH-IOL NVMe Testing Services are entitled to a copy of INTERACT™ for in-house testing to ensure that their products will meet the Integrator's list requirements when submitted for testing. While most test requirements can be performed with the PC edition tool, a subset of tests specific to PCIe products are only available on the Teledyne-LeCroy tool, which require low level traffic generation capability.
-
Product
Data Management Software
-
OpenLab data management solutions offer secure, centralized management of your instrument raw data, PDF reports, and all other electronic records. Automated processes enable you to organize and retrieve information instantly, from any location. And whether you need to securely store your data on premises or in the cloud, we offer flexible, scalable solutions to address your data storage needs.
-
Product
Conformance Testing Software
Clarinet-TTCN VOIP ETS
-
Protocol: the ITU-T H323 and H225 define VOIP call signaling protocol for "Packet based multimedia communication systems".IUT: H323/H225 Terminal, gatekeeper and gatewayATS: Based on first ETSI Drafts TS 101 804-2 and 101 804-3 rewritten by ACACIA
-
Product
Healthcare Software Testing
-
QACraft provides comprehensive testing services for Healthcare websites to improve overall performance and generate more revenue.
-
Product
NFC Conformance Test System
T3111S
Test System
The T3111S RIDER NFC Conformance Test System is the Keysight solution for RF Analog and Digital Protocol testing of NFC, EMV and ISO devices. The Test System is based on the Keysight T1141A NFC Test Set and it is complemented by the Keysight's or FIME's robots for accurate and repeatability RF testing. Selected 3rd party positioning robots can also be supported.
-
Product
Test Data Management
Tequra Analytics
-
Tequra Analytics is a test data management and analysis solution for advanced manufacturing organisations. By using the tools provided by Tequra Analytics an extensive insight into manufacturing can be gained, enabling actions to be taken to improve quality and streamline processes. ATML Results - Industry standard format for automated test. CSV Output - Machine readable, open in spreadsheet software. PDF Reports.
-
Product
Management Systems
-
Centralized system monitoring and management for a constant overview of system functions and significantly reduced administrative workloads.Component status is constantly monitored using standard protocols and administrators are automatically warned of problems. The easy-to-use graphical user interface helps administrators quickly get to the root of any problems.Centralized system configuration and software management reduce the administrative workload and the risk of misconfiguring devices. Rohde & Schwarz provides also has centralized mission planning systems for defense applications, where various military hierarchical levels perform multiple radio system configuration steps.
-
Product
E-Learning Software Testing Services
-
QACraft provides comprehensive testing services for E-Learning websites to improve overall performance and generate more revenue.
-
Product
Software TEsting Services & Test Automation Services
-
Our test automation services help application development and delivery teams. We can help you irrespective of how many or the types of applications you need to test: web applications, mobile applications and even desktop applications. Not only are we innovators in the software testing tools space with our Qsome testing platform, but we also continually enhance software testing best-practices in the software testing services and test automation services we provide to our customers. This dedication to challenge boundaries and deliver better outcomes helps us to help you "outperform your now".
-
Product
Powertest Relay Test Software
-
For all the three phase or six phase relay testers of PONOVO, one universal software can be used, the name is PowerTest software.
