Product

The Leading Measurement System for the Analysis of Porous Materials

ELWIS

-

Autoneum Holding AG

ELWIS - Autoneum Holding AG

ELWIS (Evaluation of Light Weight Impedance System) offers a full and rapid characterization of porous materials based on the analysis of a single sample. The ELWIS system consists of the ELWIS-A and ELWIS-S components which can be used independently from each other although both applications are needed for a complete material simulation.ELWIS-A measures acoustic parameters that are needed to evaluate the acoustic performance of sound insulation and sound-absorbing multi-layer materials. An additional impedance tube for absorption measurements at higher frequencies is available for ELWIS-A.ELWIS-S measures structural parameters that are needed to simulate the dynamic and acoustic behavior of sound packages in the medium to low frequency range (including the "Poisson Ratio" for foam materials).ELWIS is very easy to operate: Thanks to its user-friendly software, the system can also be used to obtain reliable results by users with only limited experience in the characterization of porous materials.

Product

Dual Lead Adapter

PK007-018

-

Teledyne LeCroy

PK007-018 - Teledyne LeCroy

Dual Lead Adapter

Product

Ultra High 1.77 (50.00) - 10.00 (283.00) High Performance Lead Free Probe

LFRE-25Z-10

-

ECT

LFRE-25Z-10 - ECT

Current Rating (Amps): 8Average Probe Resistance (mOhm): 8Test Center (mil): 100Test Center (mm): 2.54Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 1,000,000Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Kelvin Probes (F835) F83512B0004G120

1028542

-

FEINMETALL GmbH

1028542 - FEINMETALL GmbH

The Kelvin Probes (F835) model F83512B0004G120 is engineered for precision in performance and reliability. This coaxial probe design features a compact pitch of 3.50 mm (138 mil), allowing for impeccable connectivity in tight spaces while maintaining a temperature range from -45°C to +100°C. The probe has been meticulously constructed to support continuous current usage of up to 10 A, with an impressive low typical contact resistance of just 20 mOhm, making it suitable for high-performance applications in demanding environments.

Product

Kelvin Probe F83211S0022L650

1045235

-

FEINMETALL GmbH

1045235 - FEINMETALL GmbH

The Kelvin Probe F83211S0022L650 (item number 1045235) is a Contact Probe for precise four-wire resistance measurements. The separate current and voltage paths in F83211S0022L650 support four-wire measurements in which lead and contact resistance have minimal influence on the result. The impedance specified for F83211S0022L650 is 50 Ω. The frequency range of F83211S0022L650 extends up to 1.2 GHz. The pitch of F83211S0022L650 is 5.5 mm / 217 mil. For F83211S0022L650, spring forces for the outer and inner contacts are 450 / 200 cN.

Product

Cable, 96-Pin 1.27mm Pitch Female, Spring Latches To 2 X 50-Pin, Female, Adaptor Lead, 1m

A096SFR-02F050Z5A100

-

Pickering Interfaces Inc.

A096SFR-02F050Z5A100 - Pickering Interfaces Inc.

The 96-Pin Pitch to 50-Pin Adaptor Lead is constructed from 7/36 (28AWG) Tinned Copper twisted pair wiring with Polyolefin insulation to minimise crosstalk. Metal Spring Latches are provided on the 96-Pin connector and strain relief is via latch clips for the 50-Pin connectors.

Product

Oscilloscope Module, Clamp Meter Lead, Digital Multimeter

72-9185

-

Tenma

72-9185 - Tenma

The 72-9185 is a Clamp Meter Lead for use with digital multimeter.

Product

48" Stacking Banana Plug Test Leads

146-P

-

Electronic Specialties Inc.

146-P - Electronic Specialties Inc.

These test leads feature stacking banana plug jacks, with extended 48" length. These are great for establishing connections to diagnostic test points, while allowing the connection to be tapped with other instruments...2 way connections. These feature high flexibility wire and standard 4mm size banana jacks. You will receive one red test lead and one black test lead. These test leads are compatible with Electronic Specialties 146 and 147 test lead kits.

Product

Test Lead Holder For Wires Up To 0.320In (8.13mm) Dia

4408

-

Pomona Electronics

4408 - Pomona Electronics

Test Lead Holder for Wires Up to 0.320in (8.13mm) Dia

Product

Multimeter Electronic Test Leads Kit

-

AstroAI Corp.

AstroAI Corp.

VERSATILE KIT includes 2 alligator clips with removable insulation, 2 extended range plunger mini-hooks with pass-through banana plugs, 2 heavy duty test probes, 2 42” lead extensionsUNIVERSALLY COMPATIBLE with either 0.16” banana plugs or shrouded banana plugs on all ends

Product

Assembled Test Leads

-

Arbiter Systems, Inc.

Arbiter Systems, Inc.

Carefully engineered from the ground up, Arbiter Test Leads combine performance, safety, and economy. All components are carefully selected to work well together, resulting in long life and excellent reliability.

Product

Oscilloscope Module, AC/DC, Clamp Meter Lead, Digital Multimeter

72-9180

-

Tenma

72-9180 - Tenma

The 72-9180 is an AC/DC Clamp Meter Leads, use almost any DMM as a clamp meter for current testing up to 400A and current displays as an easily translated voltage reading.