-
Product
High Current Probes (Battery Contacting) HC200F06G75TYPK
1083894
-
The High Current Probes (Battery Contacting) HC200F06G75TYPK, with order code 1083894, are engineered to facilitate precise electrical connections in demanding conditions. Designed with a robust coaxial construction, the HC200 features a pitch of 25.0 mm and operates effectively across a temperature range of -45°C to +200°C. This versatility makes it ideal for a variety of industrial and technical applications where reliability is paramount. With excellent continuous current handling capabilities of up to 300 A and a low typical contact resistance of 0.20 mOhms, it is capable of efficiently transferring energy even under substantial load conditions.
-
Product
AC Voltage Tester
-
AllWin Instrument Science and Technology Co., Ltd.
1. AC voltage tester2. TFT LCD3. PLC,RS232C,RS485 interface4. MCU control technology
-
Product
High Current Probe HCF56618B200G300
1056581
-
The HCF56618B200G300 High Current Probe is an advanced solution designed specifically for power electronics, allowing for precise measurements under various conditions. This probe boasts a robust temperature range from -45°C to +200°C, ensuring reliable operation in diverse environments. Its ergonomic design includes a basic contact probe style and features a compact pitch of 4.50 mm, making it ideal for intricate electronic applications where space is a constraint.
-
Product
AC Load Bank (Rack Mounted)
K-1000 Rack Mounted
-
Kongter Test & Measurement Co., Limited
Rack mounted resistive load bank is widely used in data center to simulate electric loads and dissipation of IT systems. These load banks are controlled by sectional steps with customized setting. Users could set power and time as per their needs with easy operation.
-
Product
High Current Probe HCF77506B300G300
1133512
-
The HCF77506B300G300 High Current Probe is specifically designed for power electronics applications, providing reliable performance across various operating conditions. With a robust temperature range of -45°C to +200°C, this probe is ideal for high-performance electronic systems that demand durability and precision. The HCF775 series is built to accommodate continuous currents up to 50A while maintaining a typical contact resistance of just 5mOhm, ensuring minimal signal loss and high data integrity in demanding environments.
-
-
Product
AC/DC Current Clamp Meter
CM1000
-
Clamp opens up to 1 inch (25.4 mm). One rotary switch operation. Large 4 digit LCD display. AC/DC Voltage measurement up to 1000 Volt. AC/DC current measurement up to 1000 A. Relative measurement. One touch auto zero. Peak Hold Function. Data Hold Function
-
Product
AC Sensor
-
This sensor started it all! Our original handheld sensor detects 50-1000 volts AC and is designed for a CAT IV environment. Always ready for use, this sensor can prevent electrical shock and is non-reactive to static electricity.
-
Product
AC Current Probe 10 mV/A, 600A, 12 Hz LF Bandwidth, 30MHz HF Bandwidth, 1m cable
T3RC0600-HF
-
AC Current Probe 10 mV/A, 600A, 12 Hz LF Bandwidth, 30MHz HF Bandwidth, 1m cable.
-
Product
LV Iron Core Shunt Reactors
-
Iron core Shunt Reactors act as an absorber of reactive power to increase energy efficiency of the power system. Shunt Reactors are used in order to compensate capacitive reactive power generated by long and lightly loaded transmission lines as well as underground cables, thus allowing the flow of more active power through the system and avoiding over voltages. Shunt Reactors can be directly connected to the power line or to a tertiary winding of a three-winding power or distribution transformer.
-
Product
AC Hipot Tester (Digital)
KT-5000PD-2D
-
This Hipot(puncture) Tester is shows a leakage current on digital meter while test.Also good, bad, test, enable signal exchange from External equipment, and it is a precision measurement equipment the system connection is easy.
-
Product
High Current Probes (Battery Contacting) HCF34906B500G1500
1030724
-
The High Current Probes (Battery Contacting) HCF34906B500G1500 is engineered for precision in high-demand applications. Designed with a robust coaxial structure, these probes offer exceptional reliability, operating within a wide temperature range of -45°C to +200°C. The HCF349 model features a pitch of 7.60 mm (300 mil), making it highly compatible with various sockets while maintaining maximum performance. With a continuous current rating of 100 A and a typical contact resistance of only 4 mOhm, this probe ensures effective electrical connectivity under rigorous conditions.
-
Product
High Current Probes (Battery Contacting) HCF77206B200G300A
1165641
-
The High Current Probes (Battery Contacting) HCF77206B200G300A is a versatile and essential tool designed for precision and reliability in battery contacting applications. This probe features a basic contact design that ensures optimal connectivity and performance across various temperatures, ranging from -45°C to +200°C. With a nominal travel of 4mm and a maximum travel of 5mm, it allows for effective engagement and disengagement without compromising the integrity of the connection. The probe's ability to handle a continuous current of 20A makes it ideal for high-performance environments where high reliability is a must.
-
Product
High Current Probes (Power Electronics) HCF31009S110N090
1001359
-
The High Current Probes (Power electronics) HCF31009S110N090, order code 1001359, is an advanced contact probe specifically designed for high-performance power electronics applications. With a robust operating temperature range of -45°C to +200°C, these probes are engineered to provide reliable and consistent performance in various challenging environments. The HCF310 model features a basic contact probe design with a pitch of 1.90 mm, ensuring precision and reliability in electrical connections.
-
Product
AC-Powered, AC Voltage Monitor, Adjustable
VMA
Voltage Monitor
NAI’s VMA is a field-adjustable, AC-Powered, AC Voltage Monitor used to monitor voltage characteristics of single- or three-phase power lines. This allows normal operation of system loads when the power-line characteristics are within pre-determined limits.High and low voltage limits, and "pick-up" and "drop-out" time delay are field-adjustable. The VMA voltage monitor is ideally suited for rugged defense and industrial applications.
-
Product
Current Probes | Current Sensors
-
Sensitivity of Conventional Probes Deliver Precise Measurement of Low Current Waveforms from 1 mA. High-precision Current Sensors, DC to 4 MHz, DC to 20 kHz, up to 50 kHz and load current sensors,
-
Product
Precision High Current Resistors/Shunts
-
Measurements International Ltd.
The precision high current shunts are a series of High Current Resistors ranging from 1 A to 3000 A with optional air moving fans and resistance values from ohms to micro-ohm.
-
Product
High Current Probes (Battery Contacting) HC200D06G73PT1000CF
1125162
-
The High Current Probes (Battery Contacting) HC200D06G73PT1000CF, identified by the order code 1125162, is engineered for high-performance applications requiring robust interfacing with battery connections. This basic contact probe is designed with precision to handle continuous currents up to 300 A, making it ideal for demanding environments. Its operational temperature range of -45°C to +200°C ensures reliability in extreme conditions, while the typical contact resistance of just 0.20 mOhm guarantees minimal energy loss during operation, enhancing the efficiency of any battery-driven system.
-
Product
Current Sensor For Outdoor Use
CT-41B
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
Equivalent to protection grade IP67
-
Product
Current Limiting Resistors
-
Current Limiting Resistors are designed for limiting the flow of current to some predetermined value and are used mainly to to keep flowing current within certain intervals while controlling the circuit.
-
Product
Programmable AC Laboratory Power Supplies, Motor-controlled
-
Programmable AC Laboratory Power Supplies, Motor-controlled
-
Product
Shunt Assembly
RSA-8
-
The RSA-8 Recording Shunt Assembly contains 8 individual shunts with terminal block programming for either a current channel (using the shunt) or bypassing the shunt and using a dropping resistor for conversion to a voltage channel.
-
Product
18-Slot 3U PXI Express Chassis with AC - Up to 8 GB/s
PXES-2780
Chassis
The ADLINK PXES-2780 is an 18-slot PXI Express chassis, compliant with PXI Express and cPCI Express specifications and offering one system slot, one system timing slot, ten hybrid peripheral slots, and six PXI Express peripheral slots for a wide variety of testing and measurement applications requiring enhanced bandwidth. The PXES-2780 provides a configurable PCIe switch fabric and is configurable in two-link, and four-link PXI express deployments, with 8 GB/s system bandwidth and up to 4 GB/s slot bandwidth for dedicated peripheral slots, thanks to PCIe gen2 signaling technology.
-
Product
DC BIAS CURRENT UNIT
3265B SERIES
-
To evaluate components at currents up to 125 A the 3265B DC Bias Units are used with either the Wayne Kerr 3255B series of Inductance Analyzers or the 3260B Precision Magnetics Analyzer. When one 3265B/25A or 3265BQ/25A DC Bias Unit is connected to an instrument up to 25 A of DC bias current can be set in steps of 25 mA with one unit. Additional DC Bias Units can be added such that with five units connected in parallel it is possible to set DC bias currents up to a maximum of 125 A DC.
-
Product
High Current Probes (Battery Contacting) HCF77205B200G150A
1165636
-
The High Current Probes HCF77205B200G150A, including the order code 1165636, exemplify precision and reliability in battery contacting applications. These probes are designed to withstand extreme temperatures ranging from -45°C to +200°C, making them ideal for diverse environmental settings. With a performance rating of 20A continuous current and an impressive typical contact resistance of just 10 mOhm, these probes ensure efficient electrical connectivity and minimal energy loss. They feature a robust construction with a beryllium copper plunger, gold plating for enhanced conductivity, and a brass barrel with silver plating for added durability.
-
Product
High Current Probes for EV Battery Packs
High Current Probe
Up to 500Amps - customized connections - battery pack charging.
-
Product
Eddy Current Engine Dynamometers
-
A precise, low-maintenance, rapid response and repeatable alternative to water brake technology, Taylor’s Eddy Current Engine Dynos provide low-inertia, air- or water-cooled operation for testing engines up to 966 hp (720 kW) in a range of markets.
-
Product
AC Digital Clamp Meter
SK-7601
-
Up to 300A AC., Conductor dia. : Φ27mm max., Compact size clamp neatly fit in your hand., Twist-resistant beaked clamp head., Auto power off., Display hold.
-
Product
Current Probes
-
Any one of several techniques used to measure electric current. The measurement of current ranges from picoamps to tens of thousands of amperes.
-
Product
High Current Probes (Battery Contacting) HCB063A29MS18C
1033703
-
The High Current Probes (Battery Contacting) HCB063A29MS18C is designed for extensive temperature variations, ensuring reliable performance in environments ranging from -45°C to +200°C. Its robust design includes a continuous current rating of up to 100A, making it suitable for applications that demand high power handling. With a typical contact resistance of merely 3.00 mOhm, the HCB063A29MS18C ensures minimal energy loss and enhanced efficiency in your electronics setup.
