Product

Analog Isolator

-

E-Max Instruments

E-Max Instruments

The Analog Optical Isolator module is a single isolated current in / current out or voltage in / voltage out channel of physical separation and electrical isolation for establishing and maintaining the independence of Class 1E equipment from non -Class 1E instrumentation circuits. Input-to-Output isolation has a steady-state isolation capability of 2500 volts AC rms. This isolation will be maintained between:a) input to output signalsb) input to output powerc) output signal to input power

Product

Digital ELCB (RCD) Tester

2820 EL

-

Standard Electric Works Co., Ltd

2820 EL - Standard Electric Works Co., Ltd

● Microprocessor-controlled.● Operating voltage 100-450V L-E.● Rated current 999mA, at 317V AC/50Hz.● Checks ELCB trip time and trip point (sensitivity).● Auto off and auto ranging.● Phase angle selection(0° / 180°).● Indicates tripping phase angle.● Impact resistant enclosure.● Over temperature shut-down.● Transient protection.● Suitable for heavy industrial use.● Fused.

Product

H885KBAT

1037131

-

FEINMETALL GmbH

1037131 - FEINMETALL GmbH

The H885KBAT Switch Probes are designed for high-performance applications, operating in a normally open (NO) configuration. With a continuous current rating of 1.00 A, these probes ensure reliable functionality in a variety of settings. The sleek, compact design, featuring a total length of 38.10 mm and an outer diameter of only 3.00 mm, makes them ideal for scenarios requiring precision and minimal space usage. Additionally, the press ring diameter of 3.20 mm allows for secure attachment, further enhancing their usability in demanding environments.

Product

6″ (15.25 cm) 1000W Pre-Irradiation Solar Simulator

Model LS1000-6S-009

-

Solar Light Company Inc.

Model LS1000-6S-009 - Solar Light Company Inc.

1000W Pre-Irradiation Solar Simulator Kit specifically designed for the pre-irradiation step during in vitro broad spectrum sunscreen testing. Fully compliant with the most current FDA and ISO requirements. The 6″ (15.25 cm) Class A beam can irradiate up to 9 PMMA plates simultaneously.

Product

Microwave Cables

-

Measure Tech, Inc.

Measure Tech, Inc.

Silicon Dioxide cable is a high stability cable at high temperatures and high frequencies. Because of thishigh stability silicon dioxide cables are currently used in nuclear reactors, decoy boxes, radars, satellites,aircraft and sophisticated missile applications. Measure Tech's Silicon Dioxide cable assemblies are excellentfor operation in extreme environment conditions where stability is crucial. Measure Tech's Silicon Dioxidecable is currently used by Lockheed Martin in their JASSM missiles. Measure Tech currently has 100% on timecdelivery for the Silicon Dioxide Cables delivered to Lockheed Martin.

Product

Low Cost Precision Shunt

LPS

-

RARA Electronics Corporation

LPS - RARA Electronics Corporation

This is a precision metal clad resistor designed with four terminals. These models exhibit a high load capacity as well as excellent accuracy. The isolated voltage and current connections make them suitable for very precise current measurements. Direct attachment to current bus and connection to voltage using flexible wires enables easy current measurement.

Product

Basic Contact Probe (75 Mil) H075WW10-2.0S1

1010828

-

FEINMETALL GmbH

1010828 - FEINMETALL GmbH

The Basic Contact Probes (75 mil) H075WW10-2.0S1, with MPN/SKU 1010828, offers reliable performance across various industrial applications. Designed with a pitch of 75 mil (1.90 mm), these probes ensure accurate connectivity and efficiency. The continuous current rating of 4.00 A demonstrates their capability to handle power-intensive tasks while maintaining durability and integrity under demanding conditions.

Product

Relaying Current Transformer Analyser

-

Eltel Industries

Eltel Industries

*Measures Ratio, Excitation Characteristics, Polarity, Winding Resistance, Remanance, and Insulation Resistance of secondary winding. * Determines Composite Error. * Used to test un-mounted CTs or CTs that are mounted but isolated inside the power system equipment. * Conducts a whole series of tests automatically, thus speeding up the time to commission CTs and relaying systems. * Battery powered test set - light weight & fully portable. * Provides a graphical presentation of the CT excitation characteristics. * Determines the IEC 10/50 knee point and the point of maximum permeability, ANSI 45 degree Slope Point. * Detects shorted turns or insulation problems within the test CT, thus avoiding commissioning of faulty equipment.

Product

Clamp Meter, Auto, True RMS, 400 A AC, 600 V AC, 600 V DC, 28 mm Jaw Opening Max.

72-7226 CAL D

-

Tenma

72-7226 CAL D - Tenma

The 72-7226 CAL D from Tenma is a digital clamp meter. This stable, safe and reliable digital clamp multimeter is designed with large scale integrated circuits and A/D converter as the core as well as overload protection and novel structure which make them a superb tool for electricians. It measures AC/DC voltage, AC/DC current, frequency, duty cycle, resistance, diodes and continuity and also includes data hold, sleep mode and relative mode features. The resistance measurement range from 400 ohm/4kohm/40Kohm/400Kohm/4Mohm/40Mohm (±(1%+2)), frequency measurement range from 10Hz to 10MHz (±(0.1%+3) accuracy). It is 3 3/4 digit digital clamp meter with precise operation, fashionable structure and highly reliable measuring instrument. The meter uses large scale of integrated circuit with double integrated A/D converter as its core and has full range overload protection. It complies with IEC61010, pollution degree 2, overvoltage category (CAT II 600V, CAT III 300V) and double insulation.

Product

32-Ch Isolated Digital Input And 32-Ch Isolated Digital Output EtherCAT Remote I/O Module

AMAX-4856

-

Advantech Co. Ltd.

AMAX-4856 - Advantech Co. Ltd.

Suitable for EtherCAT networks32-ch digital input and 32-ch digital output with 2,500 VDC isolationWide input voltage range (10 ~ 30 VDC)Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch)Quick removable European type connectorLED indicators for I/O statusSupports EtherCAT Distributed Clock (DC) mode and SyncManager modeTwo Rotary switches for up to 256 slave IDs

Product

Multi Protocol Boards

-

Excalibur Systems, Inc.

Excalibur Systems, Inc.

The EXC-4000 carrier board series was developed to meet the needs of avionic testers for multi-protocol integrated, digital bus testing. Modules may be selected out of a growing list which currently includes MIL-STD-1553/1760, MMSI, H009, ARINC-429, ARINC-708/453, Serial (232/422/485), Discrete and CAN bus. Additionally, an IRIG B decoder implements a global time stamp relative to the IRIG B pulses. The need for higher density, different protocols, and multi-channel on one integrated test card has made the EXC-4000 series very successful.

Product

High Voltage Insulation Tester Module

DP-cPCI-5586

-

Data Patterns Pvt. Ltd.

DP-cPCI-5586 - Data Patterns Pvt. Ltd.

DP-cPCI-5586 is a High Voltage Insulation Tester Module. This module facilitates single-board voltage source/measurement features with high voltage output and a nanometer. Occupying a single slot in standard cPCI rack, this module can be used for multiple point cable harness test systems with limited rack space. Applications of this board include automatic test equipment, checkout systems, force voltage measure current, and insulation test.

Product

IP67 DC Blocking Splitter Combiner

PD5033

-

INSTOCK Wireless Components, Inc

PD5033 - INSTOCK Wireless Components, Inc

PD5033 is an IP67 outdoor, weather resistant, DC blocking, three way, RF broadband, 50 ohm, power divider, power combiner furnished with N type coaxial connectors. The passive Wilkinson design passes RF and the 10 MHz reference signal through both ports while blocking DC current. This configuration is typically used in combining applications to prevent passing DC to the sum and adjacent ports. Max voltage rating at the DC blocked ports is 50 VDC. All wireless band applications in the frequency range from 698 to 2700 MHz are covered with best in class RF performance. The RoHS compliant PD5033 is a bidirectional device capable of 40 W max microwave input power levels in both power splitter and combiner apps. See 3 way power divider input rating tables for additional power handling info.

Product

Towing Dynamometer

RSL-5.4K

-

Taylor Dynamometer, Inc.

RSL-5.4K - Taylor Dynamometer, Inc.

RSL-5.4K Towing Dynamometer is designed for testing today’s compact cars. The RSL-5.4K is built with an all aluminum frame, sheet metal body and rides on an independent, coil spring suspension. The RSL 5.4K uses an eddy current absorber for power absorption. The power is provided by batteries and an alternator.

Product

Smoking/E-Cigarette Testing Machines Series

-

Haida Equipment Co., Ltd.

Haida Equipment Co., Ltd.

E-Cigarette Testing Machines are mainly used to measure the draw resistance, puff number, voltage and current, smoke concentration and other properties of electronic cigarettes. It is suitable for electronic cigarette production quality control and electronic cigarette inspection. Using computer control, it can record and export data in real time, which is clear, convenient and efficient.

Product

Surface Analysis

Dimension AFP

-

Bruker Optics

Dimension AFP - Bruker Optics

The Dimension AFP is the world's only fab-based metrology tool specifically designed for both CMP profiling and etch depth metrology for current and advanced technology nodes. The system combines the superb resolution of an AFM with the long-scan capability of an atomic force profiler tomonitor etch depth and dishing and erosion on submicron features with unsurpassed repeatability.

Product

Power Inductor

-

Pulse Electronics

Pulse Electronics

Is a passive two-terminal electrical component that stores energy in a magnetic field when electric current flows through it.

Product

POWERSTROKE FUEL INJECTOR TEST KIT

DFST20

-

Matco Tools

DFST20 - Matco Tools

*Tests Powerstroke engines from 1994 to current*Includes adapters necessary to pressure test the fuel system*Adapters can be used for testing at both the fuel filter and at the fuel pump

Product

Digital Multimeters

-

Beha-Amprobe

Beha-Amprobe

is a test tool used to measure two or more electrical values—principally voltage (volts), current (amps) and resistance (ohms).

Product

Basic Contact Probe F77233S130L200E15H

1169312

-

FEINMETALL GmbH

1169312 - FEINMETALL GmbH

The F77233S130L200E15H model, known as the Basic Contact Probe, is designed to deliver exceptional performance across a range of applications. Engineered for precision, this contact probe features a compact design with a total length of 37mm and a projection height of 15mm, making it a versatile tool in various electrical and mechanical settings. The probe operates efficiently within a temperature range of -45°C to +80°C, and is capable of handling continuous currents of up to 5.00 A, ensuring reliability even in demanding environments.