Product

Multifunction Installation Testers

-

Shanghai Beha Electronics Co., Ltd.

Shanghai Beha Electronics Co., Ltd.

Loop impedance and prospective short circuit current measurement• Line impedance and prospective short circuit current measurement• Earth loop resistance in TT-systems• Rotary field test• RCD measurements (contact voltage, trip time, trip current - ramp method)• RCD analysis for test of all RCD parameters • Low Ohm and continuity measurement • Insulation measurement up to 1000V (suitable for 690 V industrial mains systems)• Earth resistance measurement with probes and clamp adapters• Voltage and frequency measurement • Current measurement with clamp adapters(optional)• Power and energy measurements• Harmonics measurement for voltage and current upto the 21st harmonics

Product

Pogo Pin

-

Test Tooling Solutions Group

Test Tooling Solutions Group

Probe pin is also known as pogo pin or spring probe. It is designed to test the connection between two circuit boards and devices or equipment under test.

Product

Microwave Testing

90

-

Picoprobe

90 - Picoprobe

The PICOPROBE MODEL 90, a high performance microwave probe which incorporates a WR-12 waveguide with our patented coaxial design techniques, has inherent low loss and low dispersion characteristics.

Product

Accessories, Styli & Probes

-

Pratt & Whitney Measurement Systems, Inc.

Pratt & Whitney Measurement Systems, Inc.

A Standard to Grow With

Product

Penetration Probe

TP472I.5

-

Senseca

TP472I.5 - Senseca

Penetration probe with SICRAM module, Pt100 sensor.

Product

Soil Temperature Probe

TP32MTT.03.A

-

Senseca

TP32MTT.03.A - Senseca

Probe for soil temperature at a depth of 50 mm - protective shield from solar radiations.

Product

Web Sensor

T3511P-2

-

COMET SYSTEM, s.r.o.

T3511P-2 - COMET SYSTEM, s.r.o.

Humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

Product

High Temp Loggers

-

DeltaTRAK

DeltaTRAK

Bendable probe with rigid tip, measures up to 662°F (350°C)Monitor temperature inside bottles, vials, hard-to-reach placesHighly accurate over wide measurement rangeN.I.S.T. traceable calibrationRugged, submersible, for use in harsh environmentsNon-volatile solid state memory for maximum data securityUser replaceable batteryEasy to program and download

Product

K Thermocouple Surface Probe

TP777

-

Senseca

TP777 - Senseca

Surface thermocouple Type "K" probe. °C max: 200. Response time: 3 s.

Product

PRO Waterproof pH & Temperature Tester

pH55

-

Milwaukee Instruments

pH55 - Milwaukee Instruments

The Milwaukee Waterproof pH55 PRO pH/Temp. Tester is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select. Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications.

Product

ProLink to 2.92mm Adapter with Probe Power and Communication Pass Through

LPA-2.92

-

Teledyne LeCroy

LPA-2.92 - Teledyne LeCroy

ProLink to 2.92mm Adapter with Probe Power and Communication Pass Through

Product

Recorders

-

MRC ltd.

MRC ltd.

* Field calibration of probes* Automatic probe recognition* Field replaceable probes* Battery backup* Independent channel alarms* 60 assorted charts included* LCD display (2 line)* Alarm delay: NO DELAY, 10 mins., 30 mins., 1 hr. or 2 hrs.* Real time data view.

Product

USB Oscilloscope

Handyscope HS6 DIFF

-

TiePie engineering

Handyscope HS6 DIFF - TiePie engineering

This powerful USB 3.0 super speed oscilloscope combines fast sampling up to 1 GS/s with high resolutions of 12, 14 and 16 bit and a large memory of 64 MSamples on all four channels. The oscilloscope supports continuous streaming measurements up to 200 MS/s and can be synchronized with other oscilloscopes using the CMI interface to form a multi channel combined instrument with synchronized timebase. The CMI interface is available by default on the Handyscope HS6 DIFF. Optionally, the Handyscope HS6 DIFF can be delivered with SureConnect connection test and resistance measurement on each channel. Also, the Handyscope HS6 DIFF can be delivered with SafeGround option. With SafeGround you can switch the differential inputs of the Handyscope HS6 DIFF into single ended inputs with ground protection. It allows to make measurements using standard attenuating probes and protects the scope when a short circuit to ground is created.

Product

Diagnostic Videoscope

DS703 FC

-

Fluke Corporation

DS703 FC - Fluke Corporation

7” capacitive touch screen for accurate diagnostics in difficult to reach spaces. 720p video recording inspection camera. Adjustable LED lighting and digital zoom for quality images. Up is Up™ technology rotates the display screen to allow for appropriate image display, regardless of the orientation of the probe.

Product

Standard 1.08 (31.00) - 4.00 (114.00) Long Travel Bead Probe

BPLT-25C-4

-

ECT

BPLT-25C-4 - ECT

Current Rating (Amps): 8Average Probe Resistance (mOhm): 8Test Center (mil): 100Test Center (mm): 2.54Full Travel (mil): 350Full Travel (mm): 8.89Recommended Travel (mil): 317Recommended Travel (mm): 8.05Mechanical Life (no of cycles): 500,000Overall Length (mil): 1,460Overall Length (mm): 37.08Full Travel Remark: Standard Spring: 400 mil / 10,16 mm, Alternate Spring 400 mil / 10,16 mm, High Spring: 400 mil / 10,16 mm, Ultra High Spring: 350 mil / 8,89 mm

Product

Probe Head

-

Leeno Industrial Inc.

Leeno Industrial Inc.

Wafer level CSP probe card.

Product

Skin Surface Probe

SST-1

-

Physitemp Instruments

SST-1 - Physitemp Instruments

The SST-1 skin surface temperature probe for humans, to be taped on is re-useable and has a fast response time.

Product

Grypper G80 / G80 LIF

-

Ironwood Electronics

Ironwood Electronics

*Package-size PCB footprint: Since the PCB footprint of G80 is identical to the package, only one PCB design is required, enabling a seamless transition from test and validation through production and reducing overall cost of test*Low insertion force: Unique contact design reduces the insertion force required to insert and retain higher-ball-count packages safely and securely within the test socket*No lid required: The package snaps directly without a lid, enabling easy probing, scoping and troubleshooting the topside of the device*Excellent signal performance: A short signal path achieves low inductance and low insertion loss, providing a nearly invisible electrical connection

Product

Elevated 1.68 (48.00) - 7.00 (198.00) High Performance Bias Ball Probe

POGO-1UN-7-S

-

ECT

POGO-1UN-7-S - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 1,000,000Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Central Visibility and Remote Monitoring

Torque Visor

-

torque VIDEO SYSTEMS

Torque Visor - torque VIDEO SYSTEMS

Visor provides central visibility and remote monitoring of multiple probes, plus easy access to a comprehensive log of system events. Operators can retrieve detailed analysis directly on the respective probe, and spot fault trends across services or several geographic regions.

Product

Interchangeable Probe Active Transmitters

HD2817T…Series

-

Senseca

HD2817T…Series - Senseca

The instruments of the HD2817T… series are transmitters, indicators, and ON/OFF regulators with data logging functions, they measure temperature and humidity. The instrument has a large, backlighted, graphical display.