Software Testing
drives iterative development and assures satisfaction of requirements.
See Also: Test Software, Test Software Development, Fuzzing, Unit Testing
-
product
Multi-Instrument Software
Multi-Instrument is a powerful multi-function virtual instrument software. It is a professional tool for time, frequency and time-frequency domain analysis. It supports a variety of hardware ranging from sound cards which are available in almost all computers to proprietary ADC and DAC hardware such as NI DAQmx cards, VT DSOs, VT RTAs and so on. It consists of the following instruments and functions.
-
product
RangeNet software
RangeNet
Command and Control Technologies Inc.
RangeNet software is designed to simplify creation of distributed range control systems and enhance situational awareness of command, safety, and range personnel. It is a modular framework that is easily adapted and extended to a variety of mission types anywhere in the world. It integrates planning, configuration, simulation, training, mission execution & post mission analysis under an integrated architecture. RangeNet is a “plug-in” software module of the Command and Control Toolkit™ (CCTK), the real-time command and control middleware from CCT.
-
product
Analytical Software Suite
OpenLAB
You’re in control with OpenLAB software. This integrated suite will help you capture, analyze, and share data in ways that add business value. From data collection and analysis to interpretation and management, OpenLAB software transforms analytical data into meaningful results.
-
product
Application Software
Application software offers power and flexibility to expedite your applications. This high performing software tool manages numeric, waveform, and harmonic data measure. It allows data to be tranferred to and configured on your personal computer for maximum flexibility and support.
-
product
Safety Compliance Test System
EN 60601
Test system for electrical safety compliance testing of medical products in accordance with EN 60601-1, 3rd edition.The system is equipped with three test fixtures which are connected in parallel order to reduce the number of setup tasks for different variants in the course of day-to-day manufacturing processes. Its purpose is to test medical products, e. g. patient monitors, which are employed at hospitals to monitor heartbeat and oxygen saturation.Based on the integrated electrical safety tester by Associated Research, in combination with an AC power source and a switching matrix, it is possible to fully automate tests like for instance AC/DC high-voltage tests, insulation resistance measurements, earth connection tests and leakage current measurements.The required occupational safety is provided by a high-voltage safety hood in accordance with EN 501191. The entire safety technology, as well as the control PC, is mounted in an aluminum-profile cart.
-
product
Software Development Kits
SDKs
DTAPI - world renowned for its ease of use - enables you to integrate DekTec hardware in your application. Other SDKs are available for adding sophisticated digital-video functions toyour application without having to reinvent the wheel.Please note that some SDKs can also be used without DekTec hardware.
-
product
Resistance Software
OhmRef
OhmRef provides the power of automation for Standards maintaining statistical control of resistance values in your laboratory. This program controls a Low Thermal Scanner along with other equipment commonly available in Standards Laboratories to compare resistance standards over the range of 100µΩ to 10GΩ . Comparison accuracies arebetter than 1 ppm in the midranges.
-
product
Fixture Building Software
FixGenius
Tests show that FixGenius’ rule-based probe-mapping algorithms reduce pin deflection by up to 25% compared with traditional fixturing packages. FixGenius comes with a powerful Fixture Editor that allows the user to change the probe mapping. If a solution is mathematically possible, FixGenius’ algorithms will find it, and pick the one with least deflection. If the job simply cannot be done with one single fixture, FixGenius will fully automatically split the test into multiple fixtures or into fixture and flying probe test sets, with guaranteed test integrity.
-
product
Data Unification Software
Zenoh
Zenoh unifies data in motion, data in-use, data at rest and computations. It carefully blends traditional pub/sub with geo-distributed storages, queries and computations, while retaining a level of time and space efficiency that is well beyond any of the mainstream stacks.
-
product
Software
GPS Tracker
*Real Time display and History of all Vehicles and Personnel on Crew*Safety Reports and Legal documentation*Built around Google Earth – Data Reports free to everyone
-
product
Quality Management Software
QMan
The Paperless Repair software QMAN is a powerful quality management system. It helps achieve higher quality assurance, reduce production costs and shorten repair time – regardless of which test system you are using.
-
product
Keysight N7800A Test Management Environment (TME) Software
Special recommended calibration options: The N7800A software calculates point-to-point ISO GUM measurement uncertainty. The special “H-series” calibration options in the link below provide lower measurement uncertainties through use of direct comparison to devices directly characterized by NPL or NIST (or another NMI), along with data on a CD for easy import into the N7800A (avoids manual entry). The overall resulting N7800A measurement uncertainty then incorporates this lower device uncertainty in the overall calculated uncertainty. For more information on the special options please view this spreadsheet N7800A Special Calibration Matrix.
-
-
product
Capture Software
Easy to use software, windows based, that offers to record, view and combine up to 9 cameras in one setup. The software is compatible with a wide range of cameras, providing the option to integrate your own cameras into an imaging setup easily. It features recording to RAM or Hard drive, a Triggered recording, and timelapse recording.With the external Application Programming Interface (API), Capture can be customised and integrated in an existing setup. Through the API, you have access to device settings, recording parameters and image data.
-
product
Control Software
AsTest
AsTest control software is designed to enable the calibration and verification of energy meters on the ASTeL meter test equipment. Built-in features permit efficient service of various types of meters, as well as advanced data management. The parametrical libraries within AsTest software minimize the need to create new definitions. Assorted data visualizations provide notification of current system events on an ongoing basis. Intuitive graphic design and user friendly visualization of the testing processes makes working with AsTest control software straightforward.
-
product
Supervisory Software
A supervisory program or supervisor is a computer program, usually part of an operating system, that controls the execution of other routines and regulates work scheduling, input/output operations, error actions, and similar functions and regulates the flow of work in a data processing system.
-
product
Databus Analyzers & Software
Our BusTools provide a full suite of advanced features for use in any application requiring real-time data acquisition and analysis.
-
product
Electronics Design Software
Altium Designer
Professional unified design system, high productivity stress-free environment and native 3D PCB editor. Easily design the most complex and innovative board layouts with advanced and accessible routing tools. Stay at the frontline of innovative technology development with the world's first-and-only support for rigid-flex PCB design.
-
product
Logging Software
AMETEK Sensors, Test & Calibration
Our logging software works along with our XP2i gauges and ASM multi-scanners to create digital records of your tests. With the DataLoggerXP, you can record average or live pressure, as quick as once per second. Save the data files directly into industry standard spreadsheets, or as comma separated text files.
-
product
Software For Spectrofluorophotometer
LabSolutions RF
LabSolutions RF software was developed to be easy for anyone to understand and operate.From measurement to analysis, printing, and saving processes, windows are laid out in an easy-to-understand manner, which ensures that measurements can be performed easily. All measurement programs feature the same main toolbar, menu, measurement toolbar, tree view, and log window conguration, so that each program can be operated in the same manner. This means the same operations can be used to operate all the specialized fluorescence analysis programs.
-
product
CAD/CAM Software
C-LINK DTM
C-LINK DTM is the interface between CAD, test and repair, and combines these into one platform. Our CAD/CAM software has since its introduction in 1985 developed into the leading standard tool. C-LINK supports virtually every test system on the market.
-
product
Embedded Software
From basics like boot firmware, built-in-test, and operating system support to CERT bootloaders and intrinsic security, Abaco gives developers the tools to maximize their hardware investment and develop applications on a solid foundation.
-
product
Seismic Analysis Software
GeoSonics announces our latest software suite. AnalysisNET is the most comprehensive and advanced software for GeoSonics 3000 Series seismograph. The software combines Seismic Analysis and Event Manager software in a single package that employs the .NET framework. AnalysisNET allows easier access to data files provides multiple report combinations and gives you the ability to manage your data.
-
product
Software
Analysis of the bat calls may be required in some situations e.g. in order to positively identify a certain species. The software BatSound is an efficient, high-performance tool for various types of sound analysis. It is suitable for sound analysis in general, but also includes a number of features particularly useful to analyze bat calls recorded from a bat detector or recorded directly with a D500X or D1000X ultrasound detector.
-
product
Test Fixture, Axial And Radial
16047A
The 16047A is designed for impedance evaluation of axial/radial lead type devices of up to 13MHz. The 16047A employs Kelvin contacts which realize a wide impedance measurement range. The contact tip can be changed according to the device shape.
-
product
Velocity Software
Teledyne Marine RD Instruments
The Sentinel V ADCP is much more than a new product platform - it's a completely new way of interacting with your ADCP and your collected data. The Sentinel V's ReadyV and Velocity software are sure to become the industry benchmark, with its powerful features, multiple views, touch-screen capability and highly intuitive interface. If you can navigate a smart phone - you're ready for Velocity.
-
product
Software
3D Pro™
Textron Systems' 3D Pro software is an add-on module for RemoteView™ that allows analysts to incorporate imagery in near real-time to create rich, 3D scenes.
-
product
Powerful Software
µsoft
The µsoft software platform comprises intuitive measuring and control software, comprehensive analysis and evaluation tools, application-specific software packages as well as databank-based automation Software that meets industrial standards.
-
product
Measurement Software
From real-time, multi-monitoring system operation and analysis, to complex automation, internet measurement platforms and control interface displays - we provide all the software solutions that you need for your measurement tasks.
-
product
Software
EKKO_Project
EKKO_Project works with project .gpz files automatically exported from current GPR systems. An embedded database structure allows all GPR data and ancillary files (GPS, topography, photos, notes, etc.) to be housed in a single .gpz file for a specific project. A project file could contain a single GPR line or several hundred lines from a complex survey. Legacy .dt1 and .hd files can also be imported. Any available project information can easily be added to the .gpz file, providing a single point for all your survey information.
