-
Product
Programmable Current Preamplifier
99539
-
The Model 99539 is a modular, multi-channel current preamplifier with parallel, logic level, gain control input. It consists of circuit boards which plug into a 3 1/2" high by 19" wide rack chassis.
-
Product
Current Probe
PA-622
-
*Max. ±100A DCA*Resolution: ≧10mA*Bandwidth: DC~300KHz*Rise Time: 1.2 uS*Over Range Function*10mV/A, 100mV/A Range*Adaptor/Battery Input*Separating Design,Convenient Durable
-
Product
Differential Current Management
LINAX PQ series
-
All devices from the series/products listed below can be expanded with the "dual-channel residual current detection" add-on module to enable residual current monitoring. By comparing residual current and protective conductor current measurements, you can detect stray currents in your electrical system and initiate appropriate countermeasures.
-
Product
PXI/PXIe Wide Current Range Multiplexer Module, Dual 12-Channel, 1-Pole
40-514-107
Multiplexer Module
The 40-514-107 (PXI) and 42-514-107 (PXIe) are low density multiplexers in dual 12-channel, 1-pole configuration. They are capable of switching a wide range of current, from 10 μA to 2.5 A at 220 VDC/250 VAC. The current capability of the module permits the use of a single module type for both low and medium current test applications.
-
Product
Split-Core Current Transformers
CTS Series
-
Continental Control Systems LLC
The CTS series CTs are available with windows from 0.75 inch up to 2.0 inch. They have a removable section, so that they can be installed without interrupting the circuit. 0.333 Vac output at rated current Accuracy ±1% from 10% to 100% of rated current Phase angle <2° degrees at 50% of rated current (valid for 70 A or higher) 8 ft. twisted-pair wire, 600 Vac rated UL recognized for voltages up to 600 Vac, CE mark, RoHS
-
Product
AC Voltage and Frequency Transducers
NMTU/F
-
The NMTU/F device is an AC voltage and frequency transducer with two independent analogous outputs. The A output measures AC voltage, the B output measures the frequency of input voltage. That´s why one single NMTU/F transducer is able to replace two customary transducers, thus making it possible to achieve significant savings in installation space.
-
Product
Handheld 1-D electro-magnetic current meter for rivers
AEM1-DA
-
AEM1-DA is a 1-D electro-magnetic (EM) current meter for the flow measurements in rivers, streams and various waterways. The measurement range is 0 to 5m s-1. The EM sensor can accurately measure water speeds at a shallow depth of 3cm. The display unit has a 2MB flash memory so that the data are saved with calendar information (up to 255 station data). In comparison with conventional propeller-type current meter, AEM1-DA is robust and extremely easy to be operated and maintained.
-
Product
AC DC High Voltage Break Down Tester
-
RR – AC DC HIPOT TESTERS can perform such precise dielectric test in a cost effective manner without any compromise on safety. Our hipot testers are custom made to suit needs of various industries and product ranges. A Singe tester can be used for conducting both AC and DC Insulation Testing.
-
Product
Thin Film Current Sensing Chip Resistors
CSTN
-
*Thin film process*High power rating up to 3 watts in 2512 size*Resistance values from 50m to 1ohm*High purity alumina substrate for high power dissipation*Power management applications*Switching power supply*Over current protection in audio applications*Voltage regulation module (VRM)*DC-DC converter, battery pack, charger, adaptor,*Automatic engine control*Disk drive
-
Product
Current Tester
MIG1248
-
The MIG1248 is a current generator with wave shape 8/20. Maximum impulse current is up to 48kA supported by a 12kV impulse voltage making the MIg1248 ideal for testing large varistors. An intergrated test cabinet can accomodate test components up to 5cm cube.
-
Product
High Current Probe HCF77255B200G300
1016555
-
The HCF77255B200G300 High Current Probe is meticulously engineered for power electronics applications, boasting a robust design that ensures exemplary performance in challenging environments. Capable of operating at temperatures ranging from -45°C to +200°C, this probe is ideal for high-stakes precision measurements. Its durable construction incorporates beryllium copper for the plunger, coupled with gold plating to enhance conductivity and minimize contact resistance, which is maintained at a typical rate of just 10 mOhm.
-
Product
Current Pulsers and Laser Diode Drivers (Pulsed Current)
-
These instruments generate current pulses whose amplitude is largely independent of the load voltage. This makes them ideal for pulsing device whose voltage may vary with time (for instance, the voltage drop of laser diodes may vary with temperature, or explosive squibs which change impedance during ignition). This voltage independence is a trade-off with speed. If faster rise times are required, consider using pulsed voltage instruments instead.
-
-
Product
AC High Voltage Break Down Tester
-
High Voltage Breakdown Testers also known as Hipot Testers or Insulation Testers are a necessity for any Transformer testing, Substation equipment testing, Cable testing, Panel testing and testing of various insulating materials. Insulation testing is very important to ensure and maintain the safety of electrical equipments and also for the safety of operator.
-
Product
Capacitor for AC Filtering
PECA4 (440V)
-
Lifasa - International Capacitors, SA
These capacitors are especially suitable for applications where high levels of AC voltage are required. The design of this series has been optimized for the manufacture of high performance AC filters for compensation equipment with high pollution such as UPS or wind turbines.
-
Product
High Current Probes (Power Electronics) HCF77506B400G500
1008128
-
The High Current Probes (Power electronics) HCF77506B400G500, with order code 1008128, are engineered for precise measurements in demanding electronic applications. Designed as Basic Contact Probes, these units excel in high-temperature environments, capable of operating between -45°C and +200°C, ensuring reliable performance under varying conditions. Their compact design, featuring a pitch of 5.00 mm (197 mil), makes them suitable for a range of high-density applications.
-
Product
Wireless Current Quality Analyzer and Motor Analyzer - 3SIQ
-
Signals & Systems India Private Limited
3SIQ enables current quality analysis using wireless technology and thus allows operators to work from a safe distance. This Industry 4.0 and ISO 50001 Condition-based monitoring solution seamlessly combines the flexibility of using any Smart Phone or Tablet to provide powerful analytics and insights towards predictive maintenance, making the maintenance engineers’ life not just safer, but smarter as well.
-
Product
High Current Probes (Power Electronics) HCF73317B400G300
1008187
-
The High Current Probes (Power electronics) HCF73317B400G300 is engineered for precision and reliability in critical applications, standing out with its ability to handle continuous current up to 30A and a broad operational temperature range of -45°C to +200°C. This basic contact probe is designed to provide exceptional performance, featuring a low typical contact resistance of just 8mΩ, which ensures minimal energy loss and maximal efficiency during operation. Its robust mechanical properties include a preload of 60cN, a spring force of 300cN, and a nominal travel of 4mm, allowing for accurate and consistent contact under varying conditions.
-
Product
Compact AC Auto Ranging Clamp Meter
410001
-
The small bodies and jaws fit perfectly in your hand and into tight places. Meter controls are positioned so that current measurements can be done with one hand. A large backlit display is easy to see, and the handy display hold function keeps measurements fixed on the display. Measures starting current for motors, lighting, etc.
-
Product
High Current Probes (Power Electronics) HCF77216B100G150
1019118
-
The High Current Probe (Power Electronics) HCF77216B100G150 is designed for precision applications, encapsulating advanced technology to ensure optimal performance in industrial environments. With a continuous current rating of 20 A and a wide temperature range of -45°C to +200°C, this probe excels under challenging conditions. Its robust construction features a gold-plated beryllium copper plunger for excellent conductivity and durability, while the brass barrel reinforces its mechanical integrity. The probe is engineered for precision, boasting a pointing accuracy of +/- 0.08 mm, making it suitable for intricate testing tasks in power electronics.
-
Product
12-300V AC Screwdriver Voltage Tester
5130
-
Peaceful Thriving Enterprise Co Ltd
*Category: CAT II.*With CE and cETL Approval.*Check voltage on 12-300V AC.*Test for voltage and continuity.*Power by two LR44/L1154, 1.5V batteries.*Pollution degree: 2 (accordance with IEC 60664-1)
-
Product
Power Monitor, AC- or DC-Powered
109
Power Monitor
NAI’s 109 is an AC- or DC-Powered Power Monitor used to monitor voltage, frequency, and phase characteristics of single- or three- phase power lines. This allows normal operation of system loads when the power-line characteristics are within predetermined limits.The 109 monitor provides three separate control circuits and output relays indicating the condition of each line characteristic. It is ideally suited for rugged defense and industrial applications.
-
Product
AC Load Banks
30 kW Series
-
Mosebach Manufacturing Company
Mosebach’s 30 kW series load banks offers a continuous load at either 480 or 208 volts in a very compact, lightweight, portable design with a 1kW resolution.
-
Product
Leakage Current Tester
-
Test Voltage : - 1V to 500V DC settableAccuracy : ± 1% of set Value ± 1digitLeakage Current : - Accuracy - ± 0.5% ± 1digitDigital Model – 19.99μA / 199.9 μA / 1.999mA / 19.99mAAnalog Model - 10μA /25μA/100 μA/1mA/2.5mA/10mASeparate Indication for Charge / Measure and Discharge modeAvailable in Digital Version Also
-
Product
Clamp type AC Current Sensor／for Leakage Current Measurements(ZCT Series)
ZCT-140
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*Leakage current measurements of feeder*Compact size*AC 1mA～300A
-
Product
High Current Probes (Power Electronics) HCF77214B130G300
1007945
-
The High Current Probes (Power electronics) HCF77214B130G300 are meticulously designed for high-precision applications within the power electronics sector. With a basic contact probe type, this model features a robust temperature tolerance ranging from -45°C to +200°C, making it ideal for various challenging environments. The design incorporates a pitch of 2.54 mm, allowing for effective integration into compact setups, ensuring it meets the demands of modern electronic applications.
-
Product
High Current Probes (Battery Contacting) HCB095A11CUG19
1015191
-
The High Current Probes (Battery Contacting) model HCB095A11CUG19 is engineered for optimal performance in demanding electrical applications. With a pitch of 12.0 mm (472 mil), these probes are designed to operate under a broad temperature range of -45°C to +200°C, ensuring reliability even in extreme conditions. Their robust construction features a beryllium copper plunger with a gold plating, providing superior conductivity and long-lasting durability. This model boasts continuous current ratings of up to 100.00 A and maintains a typical contact resistance of only 2.00 mOhm, making it ideal for high power requirements.
-
Product
Through Hole type DC Current Sensor／for DC Leakage Current Measurements
DCZCT-60NK
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*DC earth fault measurement*DC leakage current measurement*Least affection from the magnetization of core and temperature fluctuation*Convenient ＋24V single polarity power supply
-
Product
AC Power Sources, Frequency Converter
MAC-01, -02, -03
-
For reliability, all models of the Titan AC Power Sources/Frequency Converters are fully current limit protected against either continuous or transient short circuit or overload conditions. When an overcurrent condition exists, the internal current control loop overrides the voltage control loop and scales back the sinewave drive until it sees a safe output current level.
-
Product
High Current Probes (Power Electronics) HC048B07G28
1017759
-
The High Current Probes HC048B07G28 (Order code 1017759) are meticulously designed for high-performance power electronics applications, capable of delivering a continuous operational current of 75A. With a robust coaxial design and an operational temperature range from -45°C to +200°C, these probes are built to withstand extreme conditions while maintaining reliability. The innovative engineering features a typical contact resistance of just 3 mOhm, ensuring minimal energy loss and enhancing measurement accuracy. The probes have a total length of 49.70 mm, which, combined with their precise dimensional specifications, allows for seamless integration into various electronic test setups.
