Loop backs
connect input to ouput to test I/O loop.
-
Product
RCD Loop Line
-
Digital measuring instrument for RCD testing with Loop and Line resistance measurement also without tripping the RCD.
-
Product
Push Back Probes (VF4) VF405B230G20
1002314
-
The Push Back Probes (VF4) VF405B230G20 is a high-precision contact probe designed to meet rigorous technical standards. With a compact design that features a pitch of just 4mm, this probe is ideal for applications requiring accurate measurements in tight spaces. The probe operates effectively across a temperature range of -45°C to +100°C, ensuring reliable performance in varying environmental conditions.
-
Product
Pump Back Gas Analyser
Rapidox SF6 6100
-
The Rapidox SF6 6100 Pump Back is the latest in fully-automatic gas analysers, designed for controlling and monitoring the quality of SF6 in medium & high voltage gas insulated electrical equipment. Exceptional accuracy and stability are provided when measuring the purity of SF6 gas, through specially selected sensors.
-
Product
Back Pressure Spring For Vacuum Adapter
-
The counterpressure spring for vacuum adapters ensures that the board carrier plate with the test specimen is lifted off the needle bed at the end of the test.
-
Product
Digital Phase Locked Loop (PLL)
A6-CPS
-
The A6-CPS digital phase locked loop (PLL) can be customised to a specific application and shipped ready for use in production.
-
Product
Line Loop Tester
8455
-
Simpson?s Model 8455 Line Loop tester detects line shorts, opens and multiple ringers, DC voltages and loop resistance. It can measure DC voltage up to 100 volts and loop resistance to 2 megohms. A front panel ?reverse polarity? switch allows changing polarity positions quicker and easier than manually switching test leads when making line checks.
-
Product
Spring Back Tester
HTJ-16
-
Shanghai Dean Electrical Co., Ltd
Executive standard: GB/T4074.3-2008/IEC60851-3; Inspection standard: JB/T4279.4-2008Used to measure the spring back characteristic of enameled round wires with nominal conductor diameter of between 0.080mm and 1.600mm;Number of winding turns: 5 turns and a halfStop accurately at zero position of the scale after automatic windingAs soon as the value of spring back angle stop counting, the dial will stop to rotate immediately, so that the value displayed on LED and read on the dial are the same.Sensor is unnecessary to be adjusted for samples of different specificationsCoils loosen slowly during spring back, no action of spring back or jump suddenly.Application of SCM control allows for fast operation and strong anti-interference capacity;
-
Product
Loop powered Moisture Analyzer
PLMa
-
Multifunctional Multi-Purpose Cost Effective, easy-to-use dew point sensor, dew point probe
-
Product
Push Back Probes (VF4) VF483B0002G25
1005193
-
The Push Back Probes (VF4) VF483B0002G25 represent a pinnacle in precision touch probing technology, ideal for high-performance applications demanding reliability and accuracy. These basic contact probes feature a design meticulously engineered to operate within an extensive temperature range of -45°C to +100°C, making them versatile for use in diverse environments. With a pitch of 4.00 mm (157 mil), the probes ensure effective contact with minimal interference, while their significant preload of 300 cN and robust spring force of 2500 cN guarantee consistent performance.
-
Product
Push Back Probes (VF3) VF305B300G15
1005905
-
The Push Back Probes (VF3) VF305B300G15, with order code 1005905, represent a hallmark of precision and reliability in contact probing technology. Designed for varied applications, these basic contact probes are engineered to endure extreme temperature ranges from -45°C to +100°C, ensuring consistent performance in challenging environments. With a pitch measurement of 3.00 mm (118 mil), they deliver reliable connectivity and efficient signal transfer across diverse use cases. The robust construction employs high-grade materials such as beryllium copper for the plunger, plated in gold for enhanced conductivity, while the brass barrel, also gold-plated, ensures durability and anti-corrosion.
-
Product
4-20 mA Loop Powered Two Wire Oxygen Transmitter
OxyTrans
-
The Edgetech Instruments Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument.
-
Product
Push Back Probes (VF4) VF483B0004G25
1005188
-
The Push Back Probes (VF4) VF483B0004G25 are precision-engineered contact probes designed for reliability in various applications. With a basic design focused on performance, these probes are crafted to operate effectively within a wide temperature range of -45°C to +100°C. A pitch of 4.00 mm ensures compatibility with standard systems, making them an essential tool for engineers and technicians looking for high-performance solutions in their electronic testing environments.
-
Product
Short Circuit Loop Impedance Meter
AMZC-306
-
Voltage measurement up to 750V and up to 250V with resolution 0,1V ; Measurements using Uni-Schuko adapter or test wires 1,2; 5; 10 and 20m ; Loop impedance measurement with resolution 0,01Ω and much more
-
Product
Push Back Probes (VF4) VF416B200G15
1005245
-
The Push Back Probes (VF4) VF416B200G15, with order code 1005245, are precision-engineered contact probes designed for versatile applications across various industrial settings. These basic contact probes are critically acknowledged for their high-quality design, featuring a pitch of 4.00 mm, making them suitable for achieving reliable connectivity even in challenging environments. The operating temperature range of -45°C to +100°C ensures their performance stability, providing users with confidence in their durability and functionality.
-
Product
Antenna, Loop
EM-6874 | 20 Hz – 30 MHz
-
The EM-6874 Loop antenna is nominally used 20 Hz to 30 MHz and is designed for uncalibrated substitution measurements of shielding effectiveness as described by MILSTD-285, IEEE STD 299, and NSA-65-6.
-
Product
Model QLS 4-20 mA Loop Splitter / Retransmitter
-
Generates up to four individually grounded and individually adjustable 4-20 mA loops from a single 4-20 mA or 0-10V input. Overcomes problems which occur when the same 4-20 mA signal is applied to multiple loads in series. Allows outputs to have different grounds, and allows individual loops to be opened without affecting signal to other loads.
-
Product
Classic Collet | Back | Without Line | Matt Or Glossy | Ø 10 Mm
020-2x20/5
-
Secure plastic mounting cap for collet or wing knob
-
Product
Floating Power FET moduleAmp Loop
PFM1010
-
The PFM1010 Module is a precision instrument capable of measuring all common DC parameters in a power MosFet as well as many of the AC parameters. This module uses some very innovative techniques to make it possible to measure parameters like Rdson down into the sub-million-ohm range.
-
Product
Loop and Line Powered Level Switch
Safety IntelliPoint
-
The Safety IntelliPoint level switch provides a capacitance probe level switch with either a current output or relay contacts and “On-Board” self-diagnostics to ensure reliability. This SIL Intellipoint conforms to SIL 2 specifications providing the ultimate in level switch integrity and level sensing elements for a wide variety of temperatures, pressures, and materials.
-
Product
Push Back Probes (VF4) VF406B300G10
1002329
-
The Push Back Probes (VF4) VF406B300G10 is an essential tool for reliable contact in precision applications. With a design focused on both durability and performance, these probes feature a basic contact mechanism that excels in versatility across various operating environments. Capable of operating within a temperature range of -45°C to +100°C, these probes are engineered to withstand extreme conditions while maintaining operational integrity. The probe's technical specifications further enhance its utility, providing a continuous current rating of 10A and a typical contact resistance of only 30 mOhm, ensuring minimal signal loss and optimal conductivity in critical applications.
-
Product
Push Back Probes (VF100) VF10082B0003G15
1005140
-
The Push Back Probes (VF100) VF10082B0003G15 is engineered for precision contact applications, featuring a basic contact probe design that ensures reliable performance across various conditions. Designed to maintain functionality in a temperature range of -45°C to +100°C, this probe is an ideal choice for both standard and extreme environments. Its meticulous design includes a pitch of 2.54 mm, allowing compatibility with a range of devices and instruments, ensuring versatility in practical applications.
-
Product
Phase Locked Loop with Integrated VCO
-
PLL with integrated VCOs provide local oscillator sources and clock sources for communications (COMMS) , test and measurement (ETM) and aerospace/defense (ADEF) applications. ADI's PLLs with integrated VCO portfolio includes both narrowband and wideband parts, supporting frequencies up to 13.6GHz. Our PLLs with integrated VCO, as well as our full PLL portfolio including integer-N and fractional-N PLLs, feature best-in-class performance for phase noise, jitter, and spurious, and also feature high levels of integration in small form factor packages.
-
Product
Push Back Probes (VF4) VF405B230G15
1002313
-
The Push Back Probes (VF4) model VF405B230G15 is designed for optimal performance in various applications, ensuring versatility and reliability in critical operations. This basic contact probe features a design pitch of 4.00 mm (157 mil), allowing it to operate efficiently in temperature ranges from -45°C to +100°C. With a continuous current rating of 10 A and a low typical contact resistance of 30 mOhm, this model is not only dependable but also meets the demanding needs of modern electronic applications.
-
Product
Back and Forth Scratching Tester
WGQ-60
-
Shanghai Dean Electrical Co., Ltd
Executive standard: NEMA、JIS; Inspection standard: JB/T4279.15-2008Used to detect the scraping resistance of coating and cable insulation layer of flat wires of 0.800～5.600mm (narrow side) and the silk and enamel covered round wires with nominal conductor diameter of 0.100～5.000mm;Application of SCM control allows for fast operation and strong anti-interference capacity;Sample support table allows for parallel rise and fall, maintaining close contact between the entire plane with sample;Scratching needle is vertical to the paint scraping direction and parallel with sample supporting table;When film is scratched and the action current is ≥5mA, painting scraper would automatically stop scraping;LED would automatically display the number of scraping.
-
Product
High Current Short Circuit Loop Impedance Meter
AMZC-310S
-
Measurement of very small short-circuit loop impedances (with resolution of 0,1mΩ) using the current of 150A under 230V, maximum 280A under 440V, or measurement using the current of 23A under 230V, maximum 42A under 440V
-
Product
Loop Resistance Measuring Device According to DIN EN 61557-3 (VDE 0413-3)
-
PeakTech Prüf- und Messtechnik GmbH
A loop tester which is used to test the safety of electrical systems. These device measures the impedance of the short-circuit loop between the outer conductors of a circuit, whereby the probable short-circuit current is calculated. The protection of the circuit (miniature circuit breaker) must therefore trigger at a lower current than the expected short-circuit current, in order to avoid excessive heating of the lines and thus a fire risk. The PeakTech 2715 is due to its function and its robust design almost indispensable when performing new installations, but also for general checking of electrical systems, this device is the ideal companion.
-
Product
PXI/cPCI Programmable Power Supply - 16-bit Read Back Voltage and Current at Output
52912
Programmable Power Supply
Chroma 52912 programmable DC power supplies are designed specifically for test applications that demand precision output voltage/current and tightly coupled measurement capabilities.
-
Product
Push Back Probes (VF3) VF306B300G15
1005907
-
The Push Back Probes (VF3) VF306B300G15, identified by order code 1005907, are a superior choice for various industrial applications, boasting a robust design that ensures reliable and precise performance. With a pitch of 3.00 mm (118 mil), these basic contact probes operate efficiently within a temperature range of -45°C to +100°C, making them suitable for both challenging and standard conditions. This product is engineered for high accuracy, with a pointing accuracy of ±0.10 mm, ensuring that your measurements are both dependable and accurate, which is vital in electronic testing environments.
-
Product
Loop Meter
MZC-310S
-
The MZC-310S is a professional portable meter for testing electrical installations with over-current circuit breakers. The instrument measures short-circuit L-PE, L-N and L-L loop and prospective short-circuit loop current. A measurements can be done either with low testing current (up to 42A) with 2-pole method or high testing current (up to 280A) with 4-pole method that enables measurements with very high accuracy and resolution.
-
Product
Push Back Probes (VF100) VF10082B0004G15
1005135
-
The Push Back Probes (VF100) VF10082B0004G15 are engineered for precision and durability in electronic applications. This basic contact probe features a 2.54 mm pitch and operates effectively in temperature ranges from -45°C to +100°C, making it suitable for various demanding environments. With a continuous current rating of 5.00 A and a typical contact resistance of 30.00 mOhms, this probe ensures reliable performance under load, enhancing the reliability of your electronic connections.
