Loop backs
connect input to ouput to test I/O loop.
-
Product
Current Loop 20 MA Constant Current SI-module With Optical Isolation
MXTTY
-
Current loop 20 mA constant current (active, passive) SI-module with optical isolation.
-
Product
Push Back Probes (VF4) VF417B400G10
1011820
-
The Push Back Probes (VF4) VF417B400G10 represents a state-of-the-art solution for precision contacting and probing applications. Designed for reliability and durability, this contact probe operates effectively across a wide temperature range of -45°C to +100°C, making it suitable for various industrial and technical environments. With a basic contact probe design, the VF4 model boasts a compact form with a pitch of 4.00 mm (157 mil), ensuring compatibility with many systems and devices.
-
Product
Current Loop Adapter
OP-1C
-
This adapter supports current loop communications.The kit incorporates a communications circuit with photo-coupler isolation and constant-current power supply of insulated type, thus realizing not only monitoring but also easy communications testing with passive or active current loop devices.
-
Product
Monitoring Loops
-
The Loop Sensor was designed to monitor the generated magnetic fields in radiated susceptibility tests.
-
Product
Peel Back Force Tester
PBFT
-
Precisely measure the peel back force of carrier tape to verify your packaging systems are within specification. Results can be printed and stored with the outgoing product.
-
Product
Push Back Probes (VF100) VF10082S0001L10
1005081
-
The Push Back Probes (VF100) VF10082S0001L10, identified by order code 1005081, represent a versatile and reliable solution suited for a wide range of applications. With its innovative design, these probes offer a robust performance over an extensive temperature range of -45°C to +100°C, ensuring optimal functionality in varying conditions. The compact form factor, with a pitch of 2.54 mm, makes it easy to integrate into various equipment setups without compromising on measurement accuracy.
-
Product
LOCAL LOOP SIMULATOR FOR TR-114INCLUDING BRIDGED TAP
458-LM-A1-30-TR114
-
The Model 458-LM-A1-30-TR114 Local Loop Simulator for TR-114 is the ideal solution for simulating test loops as defined in TR-114 and includes a Bridged Tap. In addition, it is also suitable for ADSL, ADSL2, ADSL2+, and VDSL2 chip/modem/DSLAM testing of straight loops out to 24,000
-
Product
36" Front to Back Stiffeners
FB-36
-
Additional aluminum extruded front-to-back stiffeners are available for Vertical Cabinets. Includes installation hardware
-
Product
Closed Loop Hall Effect Current Sensors/Transducerswith Rectangle Windows
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on closed loop compensating principle and can be used formeasurement of DC and AC current, pulse currents etc. The output of the transducer reflects thereal wave of the current carrying conductor.
-
Product
Push Back Probes (VF3) VF383B0004G15
1005898
-
The Push Back Probes (VF3) VF383B0004G15 are precision-engineered basic contact probes designed for high-performance applications. With a pitch of 3.00 mm (118 mil), these probes operate efficiently across a temperature range of -45°C to +100°C, making them suitable for various environments. The design features ensure a robust lifespan, accommodating a continuous current of 8.00 A with a typical contact resistance of just 30.00 mOhm, which is critical for maintaining signal integrity in electrical connections.
-
Product
Push Back Probe VF483B0008G20
1004841
-
The Push Back Probe VF483B0008G20 (item number 1004841) is designed to verify that terminals are correctly locked in connector housings. VF483B0008G20 can verify that a terminal remains securely locked in the connector housing and is not pushed back beyond the permitted position during contacting. VF483B0008G20 operates with 2000 cN spring force and 5 mm nominal travel. Pointing accuracy for VF483B0008G20 is specified as ±0.1 mm. The electrical rating of VF483B0008G20 combines 10 A continuous current with 30 mΩ typical contact resistance. For installation, VF483B0008G20 uses an M2.5 x 0.35 thread.
-
Product
Push Back Probes (VF4) VF483B0003G25
1005218
-
The Push Back Probes (VF4) VF483B0003G25 is a high-performance basic contact probe designed for a wide variety of applications. Its robust construction allows for reliable operation across a significant temperature range of -45°C to +100°C, making it suitable for both harsh and controlled environments. The probe features a precise design with a pitch of 4.00 mm, ensuring accurate contact and signal transmission in electronic testing environments.
-
Product
IntelliPoint RF - Loop Powered Level Switch
-
The IntelliPoint Loop Powered Two Wire provides a capacitance probe level switch with current output and “On-Board” self-diagnostics to ensure reliability and level sensing elements for a wide variety of temperatures, pressures, and materials.
-
Product
Push Back Probes (VF3) VF383B0002G15
1005896
-
The Push Back Probes (VF3) VF383B0002G15 is a high-precision contact probe designed for reliable performance in a variety of demanding environments. With a temperature range of -45°C to +100°C, this probe ensures that it can operate effectively under extreme conditions. Its robust construction features a beryllium copper plunger with gold plating, providing excellent conductivity and corrosion resistance. The brass barrel, also gold-plated, complements the design, ensuring durability and reliability during use.In terms of functionality, the VF3 probe boasts impressive specifications. The continuous current rating is 8.00 A with a typical contact resistance of just 30.00 mOhm, minimizing energy losses and enhancing efficiency. The mechanical specs of the probe include a preload of 300 cN and a spring force of 1500 cN, enabling the probe to maintain consistent contact under various pressures. With an impressive pointing accuracy of ±0.10 mm and a nominal travel of 5.00 mm, this probe is engineered for precision in measurement applications.
-
Product
Loop Powered Trip Amplifier With Dual Relay Output
SEM1636
-
The SEM1636 monitors a (4 to 20) mA loop and provides two independent change over trip contacts set to trip at any point within the (4 to 20) mA range.
-
Product
Closed Loop Precise Hall AC/DC Current Sensor
CYHCS-LF
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on closed loop compensating principle and can be used for accurate measurement of DC and AC current, pulse currents etc. The output of the transducer reflects the real wave of the current carrying conductor.
-
Product
Push Back Probes (VF3) VF306B200G15
1040765
-
The Push Back Probes (VF3) model VF306B200G15, identified by order code 1040765, is a versatile basic contact probe designed for reliability in various applications. This model operates effectively over a wide temperature range of -45°C to +100°C, making it suitable for diverse environments. The probe features a unique pitch of 3.00 mm (118 mil), ensuring precise connectivity in confined spaces. With a continuous current capacity of 8.00 A and a typical contact resistance of just 30.00 mOhm, it guarantees excellent electrical performance.
-
Product
Friction Flow Loop System
-
Friction Flow Loop System is used for testing the effects of friction reducers by circulating at high rates through different pipe diameters. Friction Loop designs vary based on the application required.
-
Product
Push Back Probes (VF4) VF416B230G20
1005240
-
The Push Back Probes (VF4) model VF416B230G20, with order code 1005240, is designed to enhance precision in electronic applications, ensuring reliable connectivity and performance under diverse operating conditions. With a temperature range of -45°C to +100°C, this basic contact probe is well-suited for environments requiring robustness and longevity, making it ideal for both industrial and consumer applications. Its compact design features a nominal travel of 5 mm, complemented by a maximum travel reach of 5.5 mm. This functionality is crucial for maintaining contact integrity across various assembly tasks.
-
Product
Loop / PFC Testers
-
PeakTech Prüf- und Messtechnik GmbH
The PeakTech 2715 is a loop tester which is used to test the safety of electrical systems. These device measures the impedance of the short-circuit loop between the outer conductors of a circuit, whereby the probable short-circuit current is calculated. The protection of the circuit (miniature circuit breaker) must therefore trigger at a lower current than the expected short-circuit current, in order to avoid excessive heating of the lines and thus a fire risk. The PeakTech 2715 is due to its function and its robust design almost indispensable when performing new installations, but also for general checking of electrical systems, this device is the ideal companion.
-
Product
Milliamp Calibrators & Loop Calibrators
-
Practical Instrument Electronics, Inc.
PIE has milliamp calibrators to fit your needs from the PIE 334 with the basic functions of a 4-20 milliamp calibrator to the advanced loop troubleshooting capabilities of the Model 532. And PIE milliamp calibrators are the only models with patented Loop Diagnostic Technology! All the loop calibrators have fuse-less protection, rugged design, long battery life. Calibrate in the units matching your instruments by displaying in milliamps and percent (%) of 4 to 20 milliamps.
-
Product
Push Back Probes (VF4) VF406B240G25
1002328
-
The Push Back Probes (VF4) VF406B240G25 is a high-quality basic contact probe designed for precision applications. With a pitch of 4.00 mm (157 mil), it operates efficiently in a temperature range of -45°C to +100°C, making it suitable for various environments. The probe supports a continuous current of up to 10.00 A, ensuring reliable electrical performance. Its typical contact resistance is impressively low at 30.00 mOhm, allowing for optimal signal transmission and minimizing energy loss.
-
Product
Push Back Probes (VF3) VF383B0010G15
1014910
-
The Push Back Probes (VF3) VF383B0010G15 is designed as a versatile basic contact probe, capable of meeting various operational demands across multiple applications. With a temperature range spanning from -45°C to +100°C, this probe is engineered to maintain performance in extreme conditions. Built for robust applications, it features a continuous current capacity of 8.00 A, ensuring reliability in electrical connections while minimizing contact resistance to a mere 30.00 mOhm, thus enhancing overall performance efficiency.
-
Product
Temperature Loop Control Setup
ULP-27
-
Unitech Scales And Measurements Pvt. Ltd
Unitech’s Temperature Control Loop Setup is basically a PC based PID controller setup used for closed loop and open loop analysis of temperature process system. The setup comprises of RTD temperature Sensor. The water flows through the Rotameter and Process tank to which a heating coil is fitted. The heater is controlled by a Thirstier drive. The Thirstier drive is connected to PID controller. The manual control valve can control the water flow. The system is mounted on a tabletop model with all necessary Piping. Water at approx. 100 LPH has to be supplied to a system externally. The electronic panel comprises of ADC/DAC card with RS-232 interfaces.
-
Product
Closed Loop Hall AC/DC Current Sensor
CYHCS-SH
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on closed loop compensating principle and can beused for measurement of DC and AC current, pulse currents etc. The output of thetransducer reflects the real wave of the current carrying conductor.
-
Product
Push Back Probes (VF4) VF483B0004G20
1005189
-
The Push Back Probe (VF4) VF483B0004G20 is designed for precision and reliability in various applications, featuring a basic contact probe design that ensures excellent performance. With a pitch of 4.00 mm (157 mil), this probe is capable of withstanding temperatures ranging from -45°C to +100°C, making it suitable for demanding environments. Its robust electrical specifications include a continuous current rating of 10 A and a typical contact resistance of 30 mOhm, ensuring efficient electrical connectivity.
-
Product
Push Back Probe (VF4) VF483B0001G15
1005203
-
The Push Back Probes (VF4) VF483B0001G15 are designed for high performance in various applications, extending their utility across multiple industries. With a basic contact probe design, these probes offer a pitch of 4.00 mm (157 mil) and are built to endure a wide temperature range from -45°C to +100°C. They are engineered to deliver reliable results, showcasing a continuous current rating of up to 10.00 A and maintaining a typical contact resistance of just 30.00 mOhm, ensuring optimal conductivity and minimal energy loss.
-
Product
Antenna, Active Loop
EM-6869 | 9 KHz – 50 MHz
-
The Electro-Metrics EM-6869 Active Loop Antenna is used with any receiver or spectrum analyzer with 50 ohm input and covers the frequency range of 9 kHz to 50 MHz.
-
Product
Resistance Tester With Leakage Current (Loop Current)
GT00WD00ZY
-
*screen display*Double protection insulation*Non-contact measured resistance, safe, fast
-
Product
Push Back Probes (VF3) VF383B0008G15
1007117
-
The Push Back Probes (VF3) VF383B0008G15, assigned order code 1007117, represents an efficient solution for contact probing across a variety of applications. With an operational range of -45°C to +100°C, these basic contact probes are designed for robust performance in both low and high-temperature environments. Featuring a pitch of 3.00 mm, the probes ensure dependable connectivity, especially in precise applications where accuracy is paramount. Equipped for a continuous current of 8.00 A, these probes provide the electrical capacity needed for demanding tasks while maintaining a typical contact resistance of just 30 mOhm, thus optimizing efficiency and minimizing energy loss.
